اهتمام، والتطبيق غير متوافق مع الجهاز المحدد إلى Samsung Galaxy Music Duos S6012
وصف:
أصبحت Super Sus - Who Is The Impostor واحدة من أفضل الألعاب المحمولة لتحل محل بيننا. عندما جفت شعبية المشروع المعروف سابقًا أخيرًا ، بدأ المستخدمون في البحث عن مشاريع مماثلة. والمطورين ، بعد أن اختاروا الاتجاه ، فعلوا كل شيء لمواكبة العصر. أحد المشاريع الموضعية هو Super Sus - Who Is The Impostor.
هنا تحتاج إلى معرفة المحتال الذي كان على متن السفينة. هذه هي الطريقة الوحيدة لإنقاذ الرحلة الاستكشافية. سيحاول المحتال التصرف بشكل طبيعي قدر الإمكان ، وليس إثارة الشك. تتطلب Super Sus - من هو المنتحل مهارات اتصال جيدة ويقظة وتفكيرًا استراتيجيًا. كيف تجد الخائن بأسرع وقت ممكن؟ تعاون مع لاعبين آخرين لاتخاذ القرار.
يمكنك الاستمتاع بـ Super Sus - Who Is The Impostor بمفردك ومع الأصدقاء. في الحالة الأولى ، ستتمكن من اللعب مع أشخاص من مختلف أنحاء الكوكب. في الثانية ، يكفي أن تطلب من أصدقائك تثبيت التطبيق.
تشمل عيوب Super Sus - Who Is The Impostor عدم وجود ترجمة روسية. ومع ذلك ، بذل المطورون قصارى جهدهم لبدء رحلة فضائية خطيرة يمكن لأي شخص. يكفي البحث في الواجهة لبضع دقائق لاكتشاف جميع الوظائف الأساسية.
ستحتاج إلى لعب استراتيجيات مختلفة ، وإكمال مهام فريدة (لن تجد مهام مماثلة في ألعاب أخرى) ، والمشاركة باستمرار في التصويت لصالح المحتال.
لا يمكنك الوثوق باللاعبين الآخرين بنسبة مائة بالمائة. أنت بحاجة إلى الحذر من كل من الخونة المحتملين واللاعبين المحايدين (في رأيك). في Super Sus - Who Is The Impostor ، لدى الشخصيات مهام مختلفة يجب هزيمتها. يمكننا القول أن كل شخص في اللعبة هو لنفسه.
Super Sus - Who Is The Impostor معروف أيضًا بحقيقة أنه يحتوي على وضع تصنيف. تدرب في المباريات المنتظمة ، ثم قاتل لترقية مهاراتك وسمعتك. حاول أن تصبح الأفضل بين أصدقائك ومعارفك!
Super Sus - Who Is The Impostor متنوع وممتع ولا يمكن التنبؤ به.
إعلان
تحميل Super Sus - Who Is The Impostor 1.51.4.031 إلى Samsung Galaxy Music Duos S6012
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
READ_MEDIA_AUDIO
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_SCAN
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
BLUETOOTH_CONNECT
SCHEDULE_EXACT_ALARM
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to control the vibrator.
record audio
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
READ_MEDIA_AUDIO
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_SCAN
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
READ_MEDIA_AUDIO
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_SCAN
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
BLUETOOTH_CONNECT
SCHEDULE_EXACT_ALARM
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to control the vibrator.
record audio
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
READ_MEDIA_AUDIO
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_SCAN
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
READ_MEDIA_AUDIO
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_SCAN
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
BLUETOOTH_CONNECT
SCHEDULE_EXACT_ALARM
POST_NOTIFICATIONS
FOREGROUND_SERVICE
Allows the app to control the vibrator.
record audio
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
READ_MEDIA_IMAGES
READ_MEDIA_VIDEO
READ_MEDIA_AUDIO
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_SCAN
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
1. New Impostor Role: The Empress 2. Role Adjustments: Detective, Doctor, Phantom, Samurai 3. Role Roll Back: Grinch, Survivor 4. New System: Club, Pet 5. Bug Fixes
معلومات عامة
نص
1.36.9.033 (136090303)
تحميل التسجيل
2023-01-01 07:44
حجم
181.94 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to control the vibrator.
record audio
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
BLUETOOTH_CONNECT
SCHEDULE_EXACT_ALARM
POST_NOTIFICATIONS
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to control the vibrator.
record audio
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
BLUETOOTH_CONNECT
SCHEDULE_EXACT_ALARM
POST_NOTIFICATIONS
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
REQUEST_INSTALL_PACKAGES
ACCESS_SUPERUSER
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to control the vibrator.
record audio
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
REQUEST_INSTALL_PACKAGES
ACCESS_SUPERUSER
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
REQUEST_INSTALL_PACKAGES
ACCESS_SUPERUSER
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
QUERY_ALL_PACKAGES
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to move tasks to the foreground and background. The app may do this without your input.
Allows the app to control the vibrator.
record audio
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
REQUEST_INSTALL_PACKAGES
ACCESS_SUPERUSER
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
QUERY_ALL_PACKAGES
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to move tasks to the foreground and background. The app may do this without your input.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
REQUEST_INSTALL_PACKAGES
ACCESS_SUPERUSER
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to move tasks to the foreground and background. The app may do this without your input.
Allows the app to control the vibrator.
record audio
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to change the state of network connectivity.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
NETWORK_PROVIDER
GPS_PROVIDER
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
REQUEST_INSTALL_PACKAGES
ACCESS_SUPERUSER
Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
Allows the app to move tasks to the foreground and background. The app may do this without your input.