4.3 (24)
آلات الحرب دبابات مطلق النار لعبة

وصف:

لعبة آلات الحرب دبابات مطلق النار لعبة لالروبوت هو الدبابات التي تذكرنا جدا من جميع المشاريع الأخرى، وخاصة أولئك الذين لم يتم العثور على شعبية هائلة، كما حدث مع النسخة المحمولة من سوالف. بشكل عام، والمنافسة تكاد تكون مستحيلة مع مثل هذا القائد، ولكنها يمكن أن تكون ذات فائدة للاعبين رسومات جيدة واللعب المناسب الذي وحاولت أن تجعل استوديو ألعاب المرح مجانا، التقى في وقت سابق على موقعنا، والمعروف لكم لمشاريع مثل قناص 3D قاتل ( millionv 50+ التنزيلات) أو كتلة الحرفية 3D (10+ مليون التنزيلات). بشكل عام، لعبة واعدة، ولكن الواقع قد تتحول بشكل مختلف ...

هذه اللعبة ليست الكثير من مفاجأة لك، ومع ذلك، فإنه لا ينطوي على معارك مع الكمبيوتر، الإنترنت فقط، فقط ضد لاعبين آخرين. من حيث المبدأ، وهذا شيء والتي كثير من هذه الألعاب والبديل. في البداية فقط وضع المتاحة التي يلعب كل لنفسه والمشكلة يقلل إلى حقيقة أن لديك لاطلاق النار على أي شيء يتحرك ومحاولة الصمود أطول فترة ممكنة من خلال تدمير الاعداء. بعد الحصول على أول تجربة إيجابية سوف تكون قادرة على المشاركة في المعارك فريق، حيث سيطلب منك المزيد من الخبرات والمهارات من اللعب للفريق.
من بين أمور أخرى، فإن اللعبة تقدم مجموعة من الدبابات، وليس بعض همية، لكنها حقيقية جدا ومعروفة لجميع المشجعين من العربات المدرعة. فقد قدمت ونظام خزان ضبط، بحيث تقريبا أي يمكن إجراء مناسبة لمعارك طويلة، وخاصة إذا كنت سوف تكون قادرة على جمع المبلغ المطلوب من عملة اللعبة. هنا ودونات، وبطبيعة الحال، هناك، كما أن الجميع لا يريد أن يعاني لفترة طويلة على أضعف دبابة، ومع ذلك، فإنه لا يتبقى لتقديركم.

الميزات:


ألعاب العيوب:


خلاصة القول: لعبة آلات الحرب دبابات مطلق النار لعبة كان أبعد ما يكون عن أسوأ ممثل عن المواضيع دبابات على الروبوت، ولكن ما إذا كان يمكن التغلب على المنافسة - غير معروف.

إعلان

تحميل آلات الحرب دبابات مطلق النار لعبة 8.27.0

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.27.0 (18053)
تحميل التسجيل 2024-01-08 18:46
حجم 180.95 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.26.5 (18002)
تحميل التسجيل 2024-01-02 18:42
حجم 180.86 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.26.4 (17994)
تحميل التسجيل 2023-12-22 18:48
حجم 180.96 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.26.3 (17976)
تحميل التسجيل 2023-12-21 20:06
حجم 180.96 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.26.2 (17968)
تحميل التسجيل 2023-12-19 18:43
حجم 180.96 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.25.0 (17924)
تحميل التسجيل 2023-12-11 18:47
حجم 180.91 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار

- Tier 11 tanks released!
- New map, Night Dust available in all game modes
- Village map graphic optimization
معلومات عامة
نص 8.23.1 (17832)
تحميل التسجيل 2023-11-30 18:45
حجم 172.11 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.23.0 (17823)
تحميل التسجيل 2023-11-28 18:45
حجم 171.99 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.22.0 (17747)
تحميل التسجيل 2023-11-21 18:44
حجم 173.1 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.21.1 (17694)
تحميل التسجيل 2023-11-03 18:43
حجم 172.93 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.21.0 (17612)
تحميل التسجيل 2023-10-31 01:22
حجم 172.92 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.20.1 (17588)
تحميل التسجيل 2023-10-26 18:43
حجم 172.88 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.20.0 (17551)
تحميل التسجيل 2023-10-23 19:13
حجم 170.04 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.19.0 (17546)
تحميل التسجيل 2023-10-18 01:04
حجم 169.77 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.18.0 (17532)
تحميل التسجيل 2023-10-16 18:42
حجم 169.77 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.17.1 (17525)
تحميل التسجيل 2023-10-12 01:18
حجم 169.76 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
Pattern and Decals now have rarities!

From now on they will be categorized as Common, Uncommon, Rare, Epic, Legendary, War Hero, and Collector's. Each one of them has its own color code in order to easily identify them in your inventory.
معلومات عامة
نص 8.17.0 (17508)
تحميل التسجيل 2023-10-09 18:46
حجم 169.7 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.16.1 (17501)
تحميل التسجيل 2023-10-04 03:41
حجم 167.63 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
- Improvements to the Hill Base map. All collisions were tuned for better movement and shots. Also, a section of the arena was updated to improve map boundaries and mobility.

- We have moved the Crew Active button further to the left in order to avoid accidentally shooting when using it, which is an issue that many of you reported. Let us know what you think of it!
معلومات عامة
نص 8.16.0 (17482)
تحميل التسجيل 2023-10-02 18:47
حجم 167.59 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
Commander, we're proud to present War Machines' first big collaboration, introducing Crew Members based on the characters of the new movie Expendables 4!

- Barney Ross is a warfare specialist that can call a helicopter for aerial support. This will be our first War Hero Crew Member, the highest and most powerful rarity in the game!

- Gina is a multi-disciplinary mercenary that can support allies and deploy seeker bombs.
معلومات عامة
نص 8.15.0 (17427)
تحميل التسجيل 2023-09-25 18:44
حجم 168.09 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
Commander, we're proud to present War Machines' first big collaboration, introducing Crew Members based on the characters of the new movie Expendables 4!

- Barney Ross is a warfare specialist that can call a helicopter for aerial support. This will be our first War Hero Crew Member, the highest and most powerful rarity in the game!

- Gina is a multi-disciplinary mercenary that can support allies and deploy seeker bombs.
معلومات عامة
نص 8.14.4 (17388)
تحميل التسجيل 2023-09-20 02:41
حجم 167.96 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
Commander, we're proud to present War Machines' first big collaboration, introducing Crew Members based on the characters of the new movie Expendables 4!

- Barney Ross is a warfare specialist that can call a helicopter for aerial support. This will be our first War Hero Crew Member, the highest and most powerful rarity in the game!

- Gina is a multi-disciplinary mercenary that can support allies and deploy seeker bombs.
معلومات عامة
نص 8.14.2 (17365)
تحميل التسجيل 2023-09-18 12:52
حجم 167.96 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
Commander, we're proud to present War Machines' first big collaboration, introducing Crew Members based on the characters of the new movie Expendables 4!

- Barney Ross is a warfare specialist that can call a helicopter for aerial support. This will be our first War Hero Crew Member, the highest and most powerful rarity in the game!

- Gina is a multi-disciplinary mercenary that can support allies and deploy seeker bombs.
معلومات عامة
نص 8.14.1 (17360)
تحميل التسجيل 2023-09-17 12:53
حجم 167.88 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
Improvements to the Oil Field's map: Oil Fields got its new colliders, improving the tank movement and shot collisions over the whole map. To accompany this change and improve the map layout and combat, some light spots have been moved out of the line of fire, and some parts of the maps got new boundaries, allowing for some new trick shots in between buildings and obstacles. Also, the central light spot without collision has been removed completely.
معلومات عامة
نص 8.13.1 (17311)
تحميل التسجيل 2023-09-13 00:50
حجم 165.19 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
The Crew Active button is now located outside of the power-up tray, allowing you to access it much more easily. It will also notify you whenever it's no longer on cooldown and can be used again via a subtle glowing animation.
معلومات عامة
نص 8.12.1 (17242)
تحميل التسجيل 2023-09-05 00:50
حجم 165.24 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
Improvements to the Ship Docks map. As we continue with our map improvements, this time it was Ship Docks that got collisions re-done, opening more realistic gaps for shooting through, as well as fixing corners and walls for a more smooth driving experience.
معلومات عامة
نص 8.12.0 (17208)
تحميل التسجيل 2023-08-29 02:13
حجم 164.5 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.11.1 (17188)
تحميل التسجيل 2023-08-23 18:42
حجم 164.47 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.11.0 (17172)
تحميل التسجيل 2023-08-22 00:37
حجم 159.46 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.10.0 (17120)
تحميل التسجيل 2023-08-15 02:08
حجم 156.74 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
- Improvements to the Desert Post. Now, you can shoot through some of the gaps present on the map, providing a more realistic and exhilarating battlefield experience!
- Drop of the support for OpenGL ES 2.0, now OpenGL ES 3.0 will be the minimum required to run the game, this affects only Android players that has devices that do not support OpenGL ES 3.0 or above.
معلومات عامة
نص 8.9.0 (17047)
تحميل التسجيل 2023-08-07 18:43
حجم 156.79 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.8.1 (16979)
تحميل التسجيل 2023-07-26 18:45
حجم 166.4 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.7.1 (16937)
تحميل التسجيل 2023-07-19 02:08
حجم 166.51 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
- Improvements to the Village map. Now, you can shoot through some of the gaps present on the map, providing a more realistic and exhilarating battlefield experience!
- Championships will from now on reward several Garage Supply units, go get them!
معلومات عامة
نص 8.7.0 (16917)
تحميل التسجيل 2023-07-11 00:35
حجم 166.43 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.6.1 (16896)
تحميل التسجيل 2023-07-03 18:42
حجم 166.39 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.6.0 (16869)
تحميل التسجيل 2023-06-26 18:45
حجم 166.35 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.5.0 (16853)
تحميل التسجيل 2023-06-19 12:42
حجم 166.54 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.4.1 (16847)
تحميل التسجيل 2023-06-19 12:41
حجم 166.88 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.4.0 (16826)
تحميل التسجيل 2023-06-13 00:40
حجم 166.87 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.3.1 (16819)
تحميل التسجيل 2023-06-07 16:53
حجم 164.26 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.3.0 (16803)
تحميل التسجيل 2023-06-06 18:41
حجم 164.26 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.2.2 (16731)
تحميل التسجيل 2023-05-30 01:21
حجم 164.08 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.2.1 (16712)
تحميل التسجيل 2023-05-25 18:40
حجم 164.08 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.2.0 (16701)
تحميل التسجيل 2023-05-23 00:43
حجم 164.21 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.1.2 (16694)
تحميل التسجيل 2023-05-22 18:42
حجم 163.2 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

POST_NOTIFICATIONS

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.1.0 (16627)
تحميل التسجيل 2023-05-08 18:42
حجم 163.03 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 8.0.0 (16606)
تحميل التسجيل 2023-05-04 18:42
حجم 163.02 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.15.3 (16595)
تحميل التسجيل 2023-04-27 18:43
حجم 162.23 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.15.1 (16528)
تحميل التسجيل 2023-04-18 18:41
حجم 164.29 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.15.0 (16500)
تحميل التسجيل 2023-04-17 18:42
حجم 164.3 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.14.0 (16451)
تحميل التسجيل 2023-04-10 18:41
حجم 162.18 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.13.4 (16398)
تحميل التسجيل 2023-04-02 01:33
حجم 147.23 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.13.3 (16395)
تحميل التسجيل 2023-03-29 18:41
حجم 145.18 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.13.2 (16325)
تحميل التسجيل 2023-03-25 18:41
حجم 145.18 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.13.1 (16323)
تحميل التسجيل 2023-03-21 23:52
حجم 152.22 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.13.0 (16286)
تحميل التسجيل 2023-03-21 23:52
حجم 151.8 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.11.0 (16182)
تحميل التسجيل 2023-02-23 03:22
حجم 150.84 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.10.1 (16181)
تحميل التسجيل 2023-02-23 03:22
حجم 150.14 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.9.2 (16082)
تحميل التسجيل 2023-02-10 09:57
حجم 150.14 MB
العربية لا
متطلبات
الروبوت 5.1+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.6.3 (15790)
تحميل التسجيل 2023-01-11 19:33
حجم 141.29 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.6.3 (15790)
تحميل التسجيل 2023-01-11 19:33
حجم 143.12 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.3.1 (15070)
تحميل التسجيل 2022-12-13 02:02
حجم 142.65 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.3.1 (15070)
تحميل التسجيل 2022-12-13 02:02
حجم 145.47 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.1.2 (15011)
تحميل التسجيل 2022-11-09 20:54
حجم 138.64 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 7.1.2 (15011)
تحميل التسجيل 2022-11-09 20:54
حجم 141.45 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to prevent the device from going to sleep.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.19.2 (14928)
تحميل التسجيل 2022-09-23 21:22
حجم 122.39 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.19.2 (14928)
تحميل التسجيل 2022-09-23 21:23
حجم 125 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.19.0 (14921)
تحميل التسجيل 2022-09-16 23:12
حجم 120.44 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.19.0 (14921)
تحميل التسجيل 2022-09-16 23:12
حجم 123.05 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Ammunition system improvements
معلومات عامة
نص 6.17.3 (14785)
تحميل التسجيل 2022-09-03 09:35
حجم 118.6 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Ammunition system improvements
معلومات عامة
نص 6.17.3 (14785)
تحميل التسجيل 2022-09-03 09:36
حجم 121.21 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.16.0 (14396)
تحميل التسجيل 2022-07-17 02:36
حجم 116.69 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.16.0 (14396)
تحميل التسجيل 2022-07-17 02:36
حجم 119.26 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
The highly awaited Multiple Tech Skills feature has arrived! Now you can choose up to 2 Tech Skills and customize your tank to better match your playing strategy!
Miscellaneous bug fixes and quality of life improvements
معلومات عامة
نص 6.13.1 (2180)
تحميل التسجيل 2022-05-20 21:48
حجم 116.38 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
The highly awaited Multiple Tech Skills feature has arrived! Now you can choose up to 2 Tech Skills and customize your tank to better match your playing strategy!
Miscellaneous bug fixes and quality of life improvements
معلومات عامة
نص 6.13.1 (2180)
تحميل التسجيل 2022-05-20 21:48
حجم 118.94 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.10.1 (2162)
تحميل التسجيل 2022-04-14 12:36
حجم 111.2 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.10.1 (2162)
تحميل التسجيل 2022-04-14 12:37
حجم 113.49 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
- ​​Improved chat moderation
- Miscellaneous bug fixes and quality of life improvements
معلومات عامة
نص 6.10.0 (2159)
تحميل التسجيل 2022-04-10 20:09
حجم 111.18 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
- ​​Improved chat moderation
- Miscellaneous bug fixes and quality of life improvements
معلومات عامة
نص 6.10.0 (2159)
تحميل التسجيل 2022-04-10 20:09
حجم 113.47 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.9.1 (2158)
تحميل التسجيل 2022-03-19 17:18
حجم 110.86 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.9.1 (2158)
تحميل التسجيل 2022-03-19 17:18
حجم 113.15 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
WM Carnival is here! Enjoy the festivities with special content:
- New limited time Carnival Pattern & Decal
- Special Carnival Event
معلومات عامة
نص 6.8.0 (2148)
تحميل التسجيل 2022-02-25 10:23
حجم 113.36 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
WM Carnival is here! Enjoy the festivities with special content:
- New limited time Carnival Pattern & Decal
- Special Carnival Event
معلومات عامة
نص 6.8.0 (2148)
تحميل التسجيل 2022-02-25 10:23
حجم 115.65 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.6.0 (2137)
تحميل التسجيل 2022-02-04 06:38
حجم 113.29 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.6.0 (2137)
تحميل التسجيل 2022-02-04 06:39
حجم 115.57 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.5.1 (2115)
تحميل التسجيل 2022-01-09 10:17
حجم 117.11 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.5.1 (2115)
تحميل التسجيل 2022-01-09 10:17
حجم 119.37 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.4.0 (2087)
تحميل التسجيل 2021-12-21 11:02
حجم 114.38 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.4.0 (2087)
تحميل التسجيل 2021-12-21 11:02
حجم 116.63 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.3.1 (2078)
تحميل التسجيل 2021-12-06 08:34
حجم 109.8 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 6.3.1 (2078)
تحميل التسجيل 2021-12-06 08:34
حجم 112.04 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
WAR MACHINES 5 YEAR ANNIVERSARY UPDATE
معلومات عامة
نص 6.3.0 (2066)
تحميل التسجيل 2021-11-19 06:19
حجم 109.8 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
WAR MACHINES 5 YEAR ANNIVERSARY UPDATE
معلومات عامة
نص 6.3.0 (2066)
تحميل التسجيل 2021-11-19 06:20
حجم 112.04 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Standard garage is back. Bug fixes & quality of life improvements.
معلومات عامة
نص 6.2.3 (2064)
تحميل التسجيل 2021-11-11 21:51
حجم 109.31 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
WAR MACHINES 5 YEAR ANNIVERSARY UPDATE
معلومات عامة
نص 6.2.3 (2064)
تحميل التسجيل 2021-11-11 21:51
حجم 111.55 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Additional limited-time customs: Day of the Dead. Bug fixes and quality of life improvements.
معلومات عامة
نص 6.2.1 (2058)
تحميل التسجيل 2021-11-03 21:57
حجم 116.16 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Additional limited-time customs: Day of the Dead. Bug fixes and quality of life improvements.
معلومات عامة
نص 6.2.1 (2058)
تحميل التسجيل 2021-11-03 21:57
حجم 118.4 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Major update containing the newest tier of tanks. Tier 9 brings the formidable Merkava IV to the war scene, together with T90-MS, PT-91 Twardy and T-84 Oplot-M. A brand new experience for the strongest players, in which all 4 tanks are competitive and balanced to create the best experience to date. Enjoy the new power ups and tank technology, including Napalm, Wildfire, APS, and more!
معلومات عامة
نص 6.0.1 (2037)
تحميل التسجيل 2021-10-07 02:30
حجم 108.08 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Major update containing the newest tier of tanks. Tier 9 brings the formidable Merkava IV to the war scene, together with T90-MS, PT-91 Twardy and T-84 Oplot-M. A brand new experience for the strongest players, in which all 4 tanks are competitive and balanced to create the best experience to date. Enjoy the new power ups and tank technology, including Napalm, Wildfire, APS, and more!
معلومات عامة
نص 6.0.1 (2037)
تحميل التسجيل 2021-10-07 02:30
حجم 110.32 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.26.2 (2025)
تحميل التسجيل 2021-09-16 06:21
حجم 106.86 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.26.2 (2025)
تحميل التسجيل 2021-09-16 06:21
حجم 109.11 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug fixes: incendiary ammo VFX, electromagnetic ammo VFX, Tier 5 Challenge, and some quality of life improvements.
معلومات عامة
نص 5.26.0 (2018)
تحميل التسجيل 2021-09-04 16:34
حجم 99.92 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug fixes: incendiary ammo VFX, electromagnetic ammo VFX, Tier 5 Challenge, and some quality of life improvements.
معلومات عامة
نص 5.26.0 (2018)
تحميل التسجيل 2021-09-04 16:34
حجم 102.16 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains the new Friend Referral button, and some quality of life improvements and fixes.
معلومات عامة
نص 5.25.1 (2012)
تحميل التسجيل 2021-08-27 12:39
حجم 99.92 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains the new Friend Referral button, and some quality of life improvements and fixes.
معلومات عامة
نص 5.25.1 (2012)
تحميل التسجيل 2021-08-27 12:39
حجم 102.16 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains the new Friend Referral button, and some quality of life improvements and fixes.
معلومات عامة
نص 5.25.0 (2007)
تحميل التسجيل 2021-08-20 21:26
حجم 99.03 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains the new Friend Referral button, and some quality of life improvements and fixes.
معلومات عامة
نص 5.25.0 (2007)
تحميل التسجيل 2021-08-20 21:26
حجم 101.25 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.24.3 (2000)
تحميل التسجيل 2021-08-09 09:17
حجم 99.63 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.24.3 (2000)
تحميل التسجيل 2021-08-09 09:17
حجم 101.84 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.24.0 (1993)
تحميل التسجيل 2021-07-31 12:05
حجم 99.92 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.24.0 (1993)
تحميل التسجيل 2021-07-31 12:05
حجم 102.28 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.23.3 (1986)
تحميل التسجيل 2021-07-17 07:04
حجم 98.91 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.23.3 (1986)
تحميل التسجيل 2021-07-17 07:05
حجم 101.18 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.23.1 (1979)
تحميل التسجيل 2021-07-10 20:01
حجم 98.91 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.23.1 (1979)
تحميل التسجيل 2021-07-10 20:01
حجم 101.17 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.22.0 (1959)
تحميل التسجيل 2021-06-23 05:06
حجم 98.83 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.22.0 (1959)
تحميل التسجيل 2021-06-23 05:06
حجم 101.09 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.21.0 (1945)
تحميل التسجيل 2021-06-17 12:36
حجم 97.27 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.21.0 (1945)
تحميل التسجيل 2021-06-17 12:37
حجم 99.53 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.20.1 (1930)
تحميل التسجيل 2021-06-10 05:20
حجم 97.03 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.20.1 (1930)
تحميل التسجيل 2021-06-10 05:20
حجم 99.27 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.20.0 (1920)
تحميل التسجيل 2021-06-06 10:53
حجم 97.57 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
This update contains some quality of life improvements and fixes.
معلومات عامة
نص 5.20.0 (1920)
تحميل التسجيل 2021-06-06 10:53
حجم 99.81 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
- New Special Ammo available!
- Clan Gifts are back!
- Bug fixes and performance improvements
معلومات عامة
نص 5.19.3 (1911)
تحميل التسجيل 2021-05-31 18:59
حجم 96.51 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
- New Special Ammo available!
- Clan Gifts are back!
- Bug fixes and performance improvements
معلومات عامة
نص 5.19.3 (1911)
تحميل التسجيل 2021-05-31 18:59
حجم 98.75 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
- New Special Ammo available!
- Clan Gifts are back!
- Bug fixes and performance improvements
معلومات عامة
نص 5.19.1 (1895)
تحميل التسجيل 2021-05-16 10:00
حجم 95.93 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
- New Special Ammo available!
- Clan Gifts are back!
- Bug fixes and performance improvements
معلومات عامة
نص 5.19.1 (1895)
تحميل التسجيل 2021-05-16 10:00
حجم 76.95 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.18.7 (1867)
تحميل التسجيل 2021-05-05 06:47
حجم 100.4 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.18.7 (1867)
تحميل التسجيل 2021-05-05 06:47
حجم 81.42 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.18.6 (1866)
تحميل التسجيل 2021-04-30 08:06
حجم 100.4 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.18.6 (1866)
تحميل التسجيل 2021-04-30 08:06
حجم 81.42 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.18.3 (1834)
تحميل التسجيل 2021-04-26 08:59
حجم 83.12 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.18.1 (1824)
تحميل التسجيل 2021-04-16 04:22
حجم 101.42 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.18.1 (1824)
تحميل التسجيل 2021-04-16 04:22
حجم 82.46 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.18.0 (1823)
تحميل التسجيل 2021-04-07 19:16
حجم 82.46 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.17.2 (1818)
تحميل التسجيل 2021-04-07 19:15
حجم 101.45 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.17.2 (1818)
تحميل التسجيل 2021-04-07 19:16
حجم 82.49 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to control the vibrator.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
1h and 3h unlimited fuel items are now available for purchase!
معلومات عامة
نص 5.16.3 (1783)
تحميل التسجيل 2021-03-09 03:41
حجم 82.29 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
1h and 3h unlimited fuel items are now available for purchase!
معلومات عامة
نص 5.16.1 (1767)
تحميل التسجيل 2021-02-17 16:31
حجم 73.54 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Enhanced graphics and two new events coming soon: Golden Wars and Clan Consumable.
معلومات عامة
نص 5.15.0 (1750)
تحميل التسجيل 2021-01-15 07:59
حجم 76.16 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
NEW PLAYER PROFILE: Check out the new design in which relevant player information and main achievements are easier to access!
معلومات عامة
نص 5.14.5 (1745)
تحميل التسجيل 2021-01-09 08:10
حجم 69.21 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
NEW PLAYER PROFILE: Check out the new design in which relevant player information and main achievements are easier to access!
معلومات عامة
نص 5.14.4 (1734)
تحميل التسجيل 2020-12-23 11:49
حجم 69.19 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
NEW PLAYER PROFILE: Check out the new design in which relevant player information and main achievements are easier to access!
معلومات عامة
نص 5.14.0 (1700)
تحميل التسجيل 2020-12-09 14:17
حجم 69.18 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
NEW PLAYER PROFILE: Check out the new design in which relevant player information and main achievements are easier to access!
معلومات عامة
نص 5.13.0 (1694)
تحميل التسجيل 2020-12-04 14:23
حجم 68.8 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 5.12.1 (1691)
تحميل التسجيل 2020-11-28 18:56
حجم 76.89 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
With a little delay, enjoy our special customizations to celebrate Halloween!
معلومات عامة
نص 5.11.1 (1679)
تحميل التسجيل 2020-11-18 19:48
حجم 76.23 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 5.11.0 (1672)
تحميل التسجيل 2020-11-04 19:46
حجم 76.21 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 5.10.1 (1664)
تحميل التسجيل 2020-10-18 12:32
حجم 67.55 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Introducing new Battle Emotes: check your inventory and prepare to express yourself in battle! Bug fixes for clan helps and some other minor problems.
معلومات عامة
نص 5.10.0 (1660)
تحميل التسجيل 2020-10-10 05:27
حجم 67.55 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 5.8.2 (1649)
تحميل التسجيل 2020-09-24 08:32
حجم 66.35 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Introducing 3 new ammunition types! Explore new strategies with Anti-tank, High-Velocity and Incendiary ammo.
معلومات عامة
نص 5.8.0 (1643)
تحميل التسجيل 2020-09-19 04:39
حجم 65.88 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 5.7.2 (1636)
تحميل التسجيل 2020-09-11 12:10
حجم 65.7 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 5.7.0 (1627)
تحميل التسجيل 2020-09-03 17:46
حجم 65.7 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 5.6.3 (1614)
تحميل التسجيل 2020-08-30 06:51
حجم 63.72 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 5.6.1 (1604)
تحميل التسجيل 2020-08-20 09:15
حجم 63.72 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.5.0 (1599)
تحميل التسجيل 2020-08-05 16:31
حجم 63.57 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.4.2 (1593)
تحميل التسجيل 2020-07-25 08:27
حجم 63.35 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.3.0 (1577)
تحميل التسجيل 2020-07-12 18:38
حجم 63.76 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 5.2.0 (1576)
تحميل التسجيل 2020-06-25 12:42
حجم 63.09 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Improving new HUD design and usability.
Introducing option to choose between the new or the classic HUD.
Bug fixes.
معلومات عامة
نص 5.1.0 (1575)
تحميل التسجيل 2020-06-13 05:13
حجم 63.1 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
IT'S TIME!! TIER 8 IS LIVE!!

Enjoy our brand-new tanks, power-ups and tech skills!

We are also celebrating these special times with amazing offers... Check them out!!
معلومات عامة
نص 5.0.0 (1570)
تحميل التسجيل 2020-05-27 12:48
حجم 62.95 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
New Battle HUD! Feel like driving a modern tank with our revamped interface.
معلومات عامة
نص 4.37.1 (1566)
تحميل التسجيل 2020-05-15 17:14
حجم 62.8 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 4.36.1 (1564)
تحميل التسجيل 2020-05-07 18:47
حجم 62.71 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 4.36.0 (1562)
تحميل التسجيل 2020-04-28 22:47
حجم 62.71 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 4.35.1 (1559)
تحميل التسجيل 2020-04-17 06:21
حجم 63.58 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
GET READY FOR CLAN GIFTS! For a limited time, clan members that achieve some goals or make purchases will generate a reward for their whole clan.

Added the specific flag from every country in the United Kingdom.
معلومات عامة
نص 4.34.0 (1549)
تحميل التسجيل 2020-04-03 23:18
حجم 63.66 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Clan badges new visual! Lots of new customizations to make your clan badge look epic. Bug fixes and performance improvements.
معلومات عامة
نص 4.33.2 (1543)
تحميل التسجيل 2020-03-19 07:06
حجم 62.99 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Clan badges new visual! Lots of new customizations to make your clan badge look epic. Bug fixes and performance improvements.
معلومات عامة
نص 4.33.1 (1542)
تحميل التسجيل 2020-03-19 07:06
حجم 62.99 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Clan badges new visual! Lots of new customizations to make your clan badge look epic. Bug fixes and performance improvements.
معلومات عامة
نص 4.33.0 (1540)
تحميل التسجيل 2020-03-16 06:04
حجم 62.87 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Bug fixes and performance improvements
معلومات عامة
نص 4.31.0 (1530)
تحميل التسجيل 2020-03-03 22:04
حجم 64.2 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
New ranks: Deputy-General of Joint Forces and High Commander of Joint Forces
معلومات عامة
نص 4.30.1 (1526)
تحميل التسجيل 2020-02-16 03:49
حجم 61.94 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Introducing Clan Helps: get help from your clan to open crates, upgrades and tech upgrades faster!
Free item everyday: log in to collect free rewards from the store.
معلومات عامة
نص 4.29.1 (1517)
تحميل التسجيل 2020-02-09 03:21
حجم 61.58 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Shop visual improvements and bug fixes.
معلومات عامة
نص 4.28.0 (1511)
تحميل التسجيل 2020-01-24 19:34
حجم 61.51 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.27.0 (1504)
تحميل التسجيل 2020-01-15 20:33
حجم 60.68 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
The new Hill Base is here! Join an intense fight in the the middle of the jungle and conquer your opponents in our newest map.
The social tabs have been separated from profile screen.
Also some minor bug fixes.
معلومات عامة
نص 4.26.2 (1499)
تحميل التسجيل 2020-01-08 07:23
حجم 60.63 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Arabic language fix and some other minor bug fixes
معلومات عامة
نص 4.25.2 (1494)
تحميل التسجيل 2019-12-18 21:04
حجم 79.65 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Arabic language fix and some other minor bug fixes
معلومات عامة
نص 4.20.0 (1449)
تحميل التسجيل 2019-10-14 07:16
حجم 55.94 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.19.2 (1443)
تحميل التسجيل 2019-09-28 17:06
حجم 56.08 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.14.3 (1396)
تحميل التسجيل 2019-06-27 17:25
حجم 70.7 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.14.0 (1388)
تحميل التسجيل 2019-06-16 22:21
حجم 65.67 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.14.0 (1388)
تحميل التسجيل 2019-06-20 09:46
حجم 55.84 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.13.4 (1387)
تحميل التسجيل 2019-06-08 18:52
حجم 75.43 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.12.1 (1372)
تحميل التسجيل 2019-06-04 21:35
حجم 66.72 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
• Updates in the league system
• Bug fixes
معلومات عامة
نص 4.11.1 (1357)
تحميل التسجيل 2019-05-28 04:21
حجم 67.3 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
• Improvements in the championships and rank up experience
• Bug fixes
معلومات عامة
نص 4.10.0 (1340)
تحميل التسجيل 2019-05-15 19:22
حجم 75.31 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.8.1 (1314)
تحميل التسجيل 2019-04-13 05:10
حجم 69.87 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.8.0 (1305)
تحميل التسجيل 2019-04-03 10:46
حجم 69.67 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.7.0 (1297)
تحميل التسجيل 2019-03-20 12:32
حجم 69.41 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.6.0 (1293)
تحميل التسجيل 2019-03-14 14:22
حجم 64.35 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.3.1 (1281)
تحميل التسجيل 2019-02-08 16:40
حجم 78.98 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.2.2 (1276)
تحميل التسجيل 2019-02-01 11:10
حجم 78.93 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 4.2.0 (1271)
تحميل التسجيل 2019-01-29 11:27
حجم 82.74 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
• New shield FX
• Graphical improvements
معلومات عامة
نص 4.1.0 (1261)
تحميل التسجيل 2019-01-16 05:43
حجم 86.37 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
• Tier 7 is here! Check out the amazing new tanks, power-ups and tech skills!
• Graphical improvements
معلومات عامة
نص 4.0.1 (1259)
تحميل التسجيل 2018-12-19 09:56
حجم 84.79 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
• Get ready for Christmas with our special theme garage!
• Prove you're the best in the new T6 challenge!
معلومات عامة
نص 3.9.1 (1257)
تحميل التسجيل 2018-12-09 11:40
حجم 84.5 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 3.8.1 (1250)
تحميل التسجيل 2018-12-02 18:53
حجم 84.97 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 3.8.0 (1247)
تحميل التسجيل 2018-11-30 09:00
حجم 84.95 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 3.7.1 (1240)
تحميل التسجيل 2018-11-19 06:32
حجم 91.08 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
• Happy Halloween! Come check the surprises we have prepared for you
• Bug fixes and performance improvements
معلومات عامة
نص 3.6.0 (1234)
تحميل التسجيل 2018-10-30 16:17
حجم 91.41 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
• Preparations for the new championships
• Bug fixes and performance improvements
معلومات عامة
نص 3.5.0 (1233)
تحميل التسجيل 2018-10-19 07:18
حجم 89.3 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 3.4.1 (1231)
تحميل التسجيل 2018-09-28 10:18
حجم 85.6 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 3.4.0 (1230)
تحميل التسجيل 2018-09-25 11:31
حجم 85.6 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

READ_APP_BADGE

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 3.3.0 (1222)
تحميل التسجيل 2018-09-22 19:00
حجم 99.81 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 3.2.1 (1216)
تحميل التسجيل 2018-09-07 07:04
حجم 99.72 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 3.2.0 (1214)
تحميل التسجيل 2018-09-06 08:16
حجم 99.75 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 3.1.1 (1212)
تحميل التسجيل 2018-08-29 17:06
حجم 95.07 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 3.0.0 (1204)
تحميل التسجيل 2018-08-25 03:53
حجم 90.31 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 2.14.1 (1199)
تحميل التسجيل 2018-08-10 16:42
حجم 75.82 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 2.13.2 (1197)
تحميل التسجيل 2018-08-01 16:10
حجم 75.12 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 2.13.1 (1196)
تحميل التسجيل 2018-07-27 10:13
حجم 74.86 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 2.13.0 (1183)
تحميل التسجيل 2018-07-24 19:07
حجم 74.98 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
• Tech Skills Balance Patch
• Bug Fixes and Performance Improvements
معلومات عامة
نص 2.12.2 (1174)
تحميل التسجيل 2018-07-15 19:41
حجم 72.72 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes and Performance Improvements
معلومات عامة
نص 2.11.0 (1165)
تحميل التسجيل 2018-06-21 14:05
حجم 69.2 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes and Performance Improvements
معلومات عامة
نص 2.10.0 (1161)
تحميل التسجيل 2018-06-15 10:15
حجم 69.01 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes and Performance Improvements
معلومات عامة
نص 2.9.1 (1152)
تحميل التسجيل 2018-06-03 11:09
حجم 68.8 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 2.8.1 (1079)
تحميل التسجيل 2018-05-04 07:27
حجم 68.5 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Check out the new game Map: Oil Field!
معلومات عامة
نص 2.7.1 (1032)
تحميل التسجيل 2018-03-22 01:10
حجم 66.96 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 2.7.0 (1003)
تحميل التسجيل 2018-03-10 10:46
حجم 69.43 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 2.6.2 (992)
تحميل التسجيل 2018-03-06 16:21
حجم 67.98 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 2.6.2 (981)
تحميل التسجيل 2018-02-23 17:11
حجم 68.56 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 2.6.1 (968)
تحميل التسجيل 2018-02-10 07:18
حجم 68.56 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Clan Battles are here! Challenge your Clan War opponent in intense 4v4 fights!
معلومات عامة
نص 2.6.0 (963)
تحميل التسجيل 2018-02-04 13:47
حجم 68.53 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 2.5.2 (948)
تحميل التسجيل 2018-01-30 18:39
حجم 68.32 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Bug Fixes
معلومات عامة
نص 2.5.1 (931)
تحميل التسجيل 2018-01-01 11:05
حجم 68.58 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Merry Christmas! Come checkout the gifts we have prepared for you!
معلومات عامة
نص 2.5.0 (911)
تحميل التسجيل 2017-12-15 10:45
حجم 68.27 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
• Checkout the new Power up Shop!
• Bug Fixes
معلومات عامة
نص 2.4.0 (886)
تحميل التسجيل 2017-12-07 09:34
حجم 68.29 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
• Challenges Mode
• Tier 6 Tanks
• New Power-ups
معلومات عامة
نص 2.3.0 (859)
تحميل التسجيل 2017-11-16 07:45
حجم 66.89 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 2.2.3 (767)
تحميل التسجيل 2017-10-11 07:29
حجم 58.65 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Take and share a screenshot of your tank
Bug fixes
معلومات عامة
نص 2.2.2 (751)
تحميل التسجيل 2017-09-24 10:52
حجم 58.6 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 2.2.1 (731)
تحميل التسجيل 2017-09-12 17:52
حجم 57.52 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
CLAN WARS!! Is your clan ready to conquer the world?
Begins next Monday...
معلومات عامة
نص 2.2.0 (717)
تحميل التسجيل 2017-08-20 11:20
حجم 58.87 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 2.1.5 (711)
تحميل التسجيل 2017-08-16 07:43
حجم 56.9 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 2.1.4 (688)
تحميل التسجيل 2017-08-05 09:24
حجم 56.89 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

الجديد في هذا الإصدار
+ Fixes in russian translations
معلومات عامة
نص 2.1.1 (655)
تحميل التسجيل 2017-07-06 21:47
حجم 51.65 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 2.0.6 (598)
تحميل التسجيل 2017-05-28 06:16
حجم 51.49 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
WAR MACHINES BIGGEST UPDATE EVER IS LIVE!
Now you can take to the battlefield up to 3 power ups, among dozens of awesome attack, defense and support benefits. Common power ups will include effects such as temporary speed boost, shield and increased damage. Meanwhile, epic cards will enable huge attacks, such as air strikes or tactical nukes.
Also you can access your battle log and check your previous battles.
Time to battle!
معلومات عامة
نص 2.0.0 (546)
تحميل التسجيل 2017-04-19 07:35
حجم 51.25 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
- Various bug fixes
- Performance improvements
- New levels for advanced tanks
Get your clan and your tank ready... Big news coming in the next few weeks!!
معلومات عامة
نص 1.9.4 (516)
تحميل التسجيل 2017-03-28 08:02
حجم 47.23 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 1.9.3 (512)
تحميل التسجيل 2017-03-25 10:07
حجم 47.23 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 1.9.2 (497)
تحميل التسجيل 2017-03-16 14:27
حجم 47.22 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 1.8.10 (459)
تحميل التسجيل 2017-02-16 10:30
حجم 47.1 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
New Hill Base map!
Report abuse system
Bug fixes
معلومات عامة
نص 1.8.9 (452)
تحميل التسجيل 2017-02-10 10:31
حجم 47.1 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug fixes
معلومات عامة
نص 1.8.7 (433)
تحميل التسجيل 2017-01-22 09:18
حجم 47.02 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

الجديد في هذا الإصدار
Bug Fixes!
معلومات عامة
نص 1.8.6 (409)
تحميل التسجيل 2016-12-25 09:05
حجم 46.99 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

الجديد في هذا الإصدار
- New tanks!
- Bug fixes
معلومات عامة
نص 1.8.4 (401)
تحميل التسجيل 2016-12-19 08:26
حجم 46.94 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

الجديد في هذا الإصدار
Added Kill Assist, get score by helping to destroy enemy tanks
By popular demand, clan names and player rank are now shown in battle
Bug fixes
معلومات عامة
نص 1.8.2 (372)
تحميل التسجيل 2016-12-13 09:54
حجم 46.22 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

جميع التطبيقات Fun Games For Free في mob-core.com

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك,واسمحوا لنا أن نعرف

2016/12/17 07:51
ألعاب ذات صلة:
© 2011-2024 mob-core.com