תיאור:
התכנית היא פשוטה וקלה מאוד, ללא טרדות ובעיות, זה כמו תיבת פנדורה שיכול להיפתח ולתת לך רשימת השמעה למצב הרוח שלך. אתה תהיה ארבע גירסאות של האזנה לרדיו - להאזין לתחנות שונות, אמנים בודדים, מוסיקה למצב הרוח הנכונה וסופו של דבר פסקול אישי. בבחירה כולל יותר מ -150 תחנות רדיו שונות, המכיל את כל הז'אנרים והכיוונים. אתה יכול להתאים את הזרימה של השירים באוויר, להרים בדיוק מה שאתה צריך.
| Latest BMW connectivity update Support Smart Device Link for Ford Sync and others One Touch Stations for some European countries are available Interactive Advertising UI Improvements |
| גרסה | 6.4 (679) |
| תאריך העלאה | |
| גודל | 13.99 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to read the contents of your USB storage.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to read the contents of your USB storage.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
| גרסה | 6.3 (644) |
| תאריך העלאה | |
| גודל | 13.53 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to read the contents of your USB storage.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to read the contents of your USB storage.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
| גרסה | 6.2 (628) |
| תאריך העלאה | |
| גודל | 11.53 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to read the contents of your USB storage.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to read the contents of your USB storage.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
| גרסה | 6.1 (563) |
| תאריך העלאה | |
| גודל | 7.36 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to read the contents of your USB storage.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to read the contents of your USB storage.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
| גרסה | 6.0.1 (462) |
| תאריך העלאה | |
| גודל | 6.16 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to read the contents of your USB storage.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to read the contents of your USB storage.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
| גרסה | 6.0 (389) |
| תאריך העלאה | |
| גודל | 4.42 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to read the contents of your USB storage.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to read the contents of your USB storage.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
| גרסה | 5.1 (299) |
| תאריך העלאה | |
| גודל | 10.74 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 x86 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
| גרסה | 2.89.25 (22) |
| תאריך העלאה | |
| גודל | 14.01 MB |
| עברי | לא |
| אנדרואיד | 2.1+ |
| ארכיטקטורה | - |
| הקובץ מסומן |
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to change the state of network connectivity.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
תשומת לב! כל קבצי יישומים מתארחים באישורו של המחברים או מוצאים זמין באופן חופשי באינטרנט, אם בכלל של הקבצים מפרים את זכויותיך,אנא יידעו אותנו