שימו לב, האפליקציה אינה תואמת להתקן שנבחר עבור Sony Xperia T LTE
תיאור:
משחק אינפיניטי לולאה: אנרגי הוא חידה עבור אנדרואיד שבו זה יהיה על אנרגיה, כפי שאתה מבין, אם כי למעשה, את המשמעות של המשחק מצטמצם כבר מוכר לפורמט רבים בשם "שרברב", או לכל דומה אחרת, אשר הצלחנו כבר לפגוש די רבים.
הכנו משחק באולפן אינפיניטי משחקים, וזה ראוי לציין כי מן הפורמט של "אינפיניטי לולאה" זה לא המשחק הראשון, קודם לכן, באתר שלנו הוצגו אחרים "האחים" של הפרויקט החדש, שכל אחד מהם יש פלטפורמה משותפת, בערך את אותה גרפיקה ואת רגעים אחרים, אשר, אם כי מוכר, אבל בבירור לא להפתיע מישהו צופה על העבודה של האולפן. עם זאת, המשחק הוא משהו חדש ...
המשחק, כמו גם את המהות של המשחק עדיין נראה מוכר, ובכל הגרסאות - גרפיקה, אנימציה הפלטפורמה בכלל מוכרים לנו מן הפרויקטים האחרונים של האולפן, ואת המשמעות של מה שקורה על חידות אחרות ... עם זאת, אתה צריך לספר מה אתה עושה ;)
כל רמה היא אוסף של מקורות אנרגיה, נורות מותנות "חוטים". כל אלמנט קבוע קבוע במקומו, כל מה שאתה יכול לעשות הוא לסובב את החוטים כדי לחבר את כל האלמנטים לתוך מעגל אחד, אשר יאפשר נורות להאיר. כמובן, כל רמה הבאה יהיה קצת יותר מסובך, אלמנטים חדשים שונים יתחילו להופיע וכן הלאה, הכל כרגיל. מה שחשוב הוא שאין גבול למספר המהלכים, הניסיונות או הזמן לפתור בעיה, אז אתה חושב בשלווה, לנוח ולקבל הנאה אמיתית הן את התהליך ואת המראה של המשחק.
מאפיינים:
גרפיקה יפה, אנימציה נהדר
משחק רגוע, אין לאן למהר
אין הגבלות על זמן או מהלכים
גידול חלק במורכבות
מספר רב של רמות
החסרונות של המשחק:
יש דונאט חסר טעם והרבה פרסום
מקוריות המשחק היא קטנה מאוד
בשורה התחתונה: המשחק לולאה אינסוף: אנרגי הוא פאזל נחמד מאוד במציאות, אשר נותן לך את ההזדמנות להירגע הן חזותית נשמה, עם זאת, זה בהחלט לא אוהב את אלה שאוהבים חידושים ומקוריות.
פרסומת
להורדה אינפיניטי לופ: אנרג 'י 5.0 עבור Sony Xperia T LTE
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
READ_APP_BADGE
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
QUERY_ALL_PACKAGES
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
READ_APP_BADGE
Allows the app to write to the USB storage.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
READ_APP_BADGE
QUERY_ALL_PACKAGES
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
READ_APP_BADGE
QUERY_ALL_PACKAGES
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
READ_APP_BADGE
QUERY_ALL_PACKAGES
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
QUERY_ALL_PACKAGES
READ_APP_BADGE
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
QUERY_ALL_PACKAGES
READ_APP_BADGE
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
QUERY_ALL_PACKAGES
READ_APP_BADGE
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Big Update: -Daily Challenges for Energy Experts -Haptic Feedback (Can be disabled if you want) -New Rule: Now you always need to connect all pieces -Performance Improvements
מידע כללי
גרסה
4.1.5 (100024)
תאריך העלאה
2020-12-01 12:34
גודל
21.17 MB
עברי
לא
דרישות
אנדרואיד
5.0+
ארכיטקטורה
-
בדוק יישום
הקובץ מסומן
רשות
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
QUERY_ALL_PACKAGES
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
REQUEST_INSTALL_PACKAGES
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
QUERY_ALL_PACKAGES
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
REQUEST_INSTALL_PACKAGES
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
REQUEST_INSTALL_PACKAGES
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
REQUEST_INSTALL_PACKAGES
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
REQUEST_INSTALL_PACKAGES
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
REQUEST_INSTALL_PACKAGES
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-Fixed Issue associated with ANR's on some Huawei devices -Improved the performance on Hints generation
מידע כללי
גרסה
2.8.9 (99994)
תאריך העלאה
2020-02-22 20:51
גודל
18.14 MB
עברי
לא
דרישות
אנדרואיד
5.0+
ארכיטקטורה
-
בדוק יישום
הקובץ מסומן
רשות
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
REQUEST_INSTALL_PACKAGES
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
READ_APP_BADGE
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
READ_APP_BADGE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
READ_APP_BADGE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
READ_APP_BADGE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
READ_APP_BADGE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
READ_APP_BADGE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
READ_APP_BADGE
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
READ_APP_BADGE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to write to the USB storage.
READ_APP_BADGE
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to write to the USB storage.
READ_APP_BADGE
Allows the app to read the contents of your USB storage.
Fixed cloud save bug not loading max playable level.
מידע כללי
גרסה
1.9.7 (40)
תאריך העלאה
2019-01-26 22:27
גודל
25.79 MB
עברי
לא
דרישות
אנדרואיד
5.0+
ארכיטקטורה
ARM7 x86
בדוק יישום
הקובץ מסומן
רשות
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
READ_APP_BADGE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Update Concerning GDPR. Added Privacy Policy & Terms of Service.
מידע כללי
גרסה
1.1 (24)
תאריך העלאה
2018-10-05 19:24
גודל
22.49 MB
עברי
לא
דרישות
אנדרואיד
4.1+
ארכיטקטורה
ARM7
בדוק יישום
הקובץ מסומן
רשות
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
READ_APP_BADGE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
This update is specially about improving your experience with Infinity Loop: ENERGY.
We always strive to have a polished and updated game and, of course, bug-free!
מידע כללי
גרסה
1.0.15 (23)
תאריך העלאה
2018-06-07 09:39
גודל
21.05 MB
עברי
לא
דרישות
אנדרואיד
4.1+
ארכיטקטורה
ARM7
בדוק יישום
הקובץ מסומן
רשות
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
READ_APP_BADGE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
This update is specially about improving your experience with Infinity Loop: ENERGY.
We always strive to have a polished and updated game and, of course, bug-free!
מידע כללי
גרסה
1.0.14 (22)
תאריך העלאה
2018-04-16 16:57
גודל
22.74 MB
עברי
לא
דרישות
אנדרואיד
4.1+
ארכיטקטורה
ARM7 ARM6 x86
בדוק יישום
הקובץ מסומן
רשות
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
READ_APP_BADGE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
תשומת לב! כל קבצי יישומים מתארחים באישורו של המחברים או מוצאים זמין באופן חופשי באינטרנט, אם בכלל של הקבצים מפרים את זכויותיך,אנא יידעו אותנו