• Added dual exposure controls to adjust brightness and HDR of your photo (Pixel 4). • Added Astrophotography to Night Sight to allow you take a picture of the Milky Way with one tap (Pixel 3, 3a, and 4). • Added Frequent Faces to help you capture Top Shot photos where the people you photograph most are smiling and not blinking (Pixel 4). • Added Touch and hold on the shutter button to capture Top Shot photos in the default camera mode (Pixel 2, 3, 3a, and 4).
מידע כללי
גרסה
7.4.201.322479879 (61060549)
תאריך העלאה
2020-07-25 08:41
גודל
83.8 MB
עברי
לא
דרישות
אנדרואיד
10+
ארכיטקטורה
ARM8
בדוק יישום
הקובץ מסומן
רשות
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to retrieve its code, data, and cache sizes
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to retrieve its code, data, and cache sizes
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
• Added dual exposure controls to adjust brightness and HDR of your photo (Pixel 4). • Added Astrophotography to Night Sight to allow you take a picture of the Milky Way with one tap (Pixel 3, 3a, and 4). • Added Frequent Faces to help you capture Top Shot photos where the people you photograph most are smiling and not blinking (Pixel 4). • Added Touch and hold on the shutter button to capture Top Shot photos in the default camera mode (Pixel 2, 3, 3a, and 4).
מידע כללי
גרסה
7.4.104.314953318 (61060045)
תאריך העלאה
2020-06-13 05:28
גודל
83.81 MB
עברי
לא
דרישות
אנדרואיד
10+
ארכיטקטורה
ARM8
בדוק יישום
הקובץ מסומן
רשות
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to retrieve its code, data, and cache sizes
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to retrieve its code, data, and cache sizes
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
• Added dual exposure controls to adjust brightness and HDR of your photo (Pixel 4). • Added Astrophotography to Night Sight to allow you take a picture of the Milky Way with one tap (Pixel 3, 3a, and 4). • Added Frequent Faces to help you capture Top Shot photos where the people you photograph most are smiling and not blinking (Pixel 4). • Added Touch and hold on the shutter button to capture Top Shot photos in the default camera mode (Pixel 2, 3, 3a, and 4).
מידע כללי
גרסה
7.3.021.300172532 (60092239)
תאריך העלאה
2020-03-28 19:33
גודל
77.4 MB
עברי
לא
דרישות
אנדרואיד
10+
ארכיטקטורה
ARM8
בדוק יישום
הקובץ מסומן
רשות
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to retrieve its code, data, and cache sizes
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to retrieve its code, data, and cache sizes
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
• Added dual exposure controls to adjust brightness and HDR of your photo (Pixel 4). • Added Astrophotography to Night Sight to allow you take a picture of the Milky Way with one tap (Pixel 3, 3a, and 4). • Added Frequent Faces to help you capture Top Shot photos where the people you photograph most are smiling and not blinking (Pixel 4). • Added Touch and hold on the shutter button to capture Top Shot photos in the default camera mode (Pixel 2, 3, 3a, and 4).
מידע כללי
גרסה
7.3.020.296349306 (60092113)
תאריך העלאה
2020-03-03 22:16
גודל
77.4 MB
עברי
לא
דרישות
אנדרואיד
10+
ארכיטקטורה
ARM8
בדוק יישום
הקובץ מסומן
רשות
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to retrieve its code, data, and cache sizes
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to retrieve its code, data, and cache sizes
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
• Added dual exposure controls to adjust brightness and HDR of your photo (Pixel 4). • Added Astrophotography to Night Sight to allow you take a picture of the Milky Way with one tap (Pixel 3, 3a, and 4). • Added Frequent Faces to help you capture Top Shot photos where the people you photograph most are smiling and not blinking (Pixel 4). • Added Touch and hold on the shutter button to capture Top Shot photos in the default camera mode (Pixel 2, 3, 3a, and 4).
מידע כללי
גרסה
7.3.018.291816413 (58648511)
תאריך העלאה
2020-02-04 13:53
גודל
77.4 MB
עברי
לא
דרישות
אנדרואיד
10+
ארכיטקטורה
ARM8
בדוק יישום
הקובץ מסומן
רשות
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to retrieve its code, data, and cache sizes
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to retrieve its code, data, and cache sizes
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
• Added dual exposure controls to adjust brightness and HDR of your photo (Pixel 4). • Added Astrophotography to Night Sight to allow you take a picture of the Milky Way with one tap (Pixel 3, 3a and 4). • Added Frequent Faces to help you capture Top Shot photos where the people that you photograph most are smiling and not blinking (Pixel 4). • Added Touch and hold on the shutter button to capture Top Shot photos in the default camera mode (Pixel 2, 3, 3a and 4).
מידע כללי
גרסה
7.2.018.281779528 (56486313)
תאריך העלאה
2019-12-22 14:52
גודל
113.86 MB
עברי
לא
דרישות
אנדרואיד
10+
ארכיטקטורה
ARM8
בדוק יישום
הקובץ מסומן
רשות
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to retrieve its code, data, and cache sizes
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to retrieve its code, data, and cache sizes
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
FOREGROUND_SERVICE
Allows the app to read the contents of your USB storage.
• Material You - Experience a new interface with dynamic colors and components from Google’s Material You design system. • General bugfixes and improvements
מידע כללי
גרסה
4.4.020.163412804 (41174009)
תאריך העלאה
2023-06-23 14:12
גודל
23.27 MB
עברי
לא
דרישות
אנדרואיד
7.1.1+
ארכיטקטורה
ARM8
בדוק יישום
הקובץ מסומן
רשות
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to read the contents of your USB storage.
• Added dual exposure controls to adjust brightness and HDR of your photo (Pixel 4). • Added Astrophotography to Night Sight to allow you take a picture of the Milky Way with one tap (Pixel 3, 3a and 4). • Added Frequent Faces to help you capture Top Shot photos where the people that you photograph most are smiling and not blinking (Pixel 4). • Added Touch and hold on the shutter button to capture Top Shot photos in the default camera mode (Pixel 2, 3, 3a and 4).
מידע כללי
גרסה
4.2.035.141213305 (41025813)
תאריך העלאה
2019-12-22 14:51
גודל
24.77 MB
עברי
לא
דרישות
אנדרואיד
7.1.1+
ארכיטקטורה
ARM7
בדוק יישום
הקובץ מסומן
רשות
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
ACCESS_NOTIFICATION_POLICY
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to get details about the currently synced feeds.
Allows the app to modify your currently synced feeds. Malicious apps may change your synced feeds.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
BIND_WALLPAPER
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to perform operations like adding and removing accounts, and deleting their password.
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
record audio
Allows the app to set the system wallpaper.
Allows the app to get details about the currently synced feeds.
Allows the app to modify your currently synced feeds. Malicious apps may change your synced feeds.
Allows the app to request authentication tokens.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to read the contents of your USB storage.
תשומת לב! כל קבצי יישומים מתארחים באישורו של המחברים או מוצאים זמין באופן חופשי באינטרנט, אם בכלל של הקבצים מפרים את זכויותיך,אנא יידעו אותנו