תיאור:
המשחק הזה הוא כיף וטוב במובנים רבים, למשל, יש סיפור מגניב: הכל מתחיל בצרפת, שבו מדענים, שלא ידעו איפה עוד לשים את מלוא הפוטנציאל שלה להפוך את תגלית מדהימה - הם מוצאים סוג חדש של אנרגיה, מוזרה ומסתורית. המאפיין העיקרי של אנרגיה זו הוא היכולת לשנות את הדרך בה אנשים מתקשרים עימו, שרק נפתח אופקים חדשים, גם במדע ובבטיחות של כל בני האדם, משום שהאנרגיה תנסה להכניע את האנשים עצמם, העיקר - כדי להכניע אותה ראשון!
למותר לנצל את ההזדמנות של הכוח החדש, ידע ומפגש חדשים עם האנרגיה הזו יכולים רק מוקדש, הכוללים את כל אלה שהורידו את המשחק, כך שזה הכל בידות שלך!
הרעיון הבסיסי של המשחק הוא שהוא מביא יחד אנשים שהם ברדיוס מסוים, שגרם להם לעבור והופך את העיר שלך בלחימה, שבו יש קרב על חיי אדם!
אבל יש שבט התנגדות, מי שמאמין שאדם הוא טוב יותר להתרחק מלא ידוע, ואנרגיה זו בפרט, הם יהיו הפריעו לך, או שאתה יכול להחליט להצטרף לשורותיהם ולהילחם על מערכת השמרנית מפריעה לאחרים!
Goodies משחקי Ingress:
Ingress משחקי חסרונות:
מסקנה: משחק נהדר שבי גלובלי ממה שאנחנו יכולים לדמיין, כי לבד מדברים גם להוריד אותו, חוץ מזה, שלא יאבד. אגב הרעיון של משחק מספר השחקנים, יותר - טוב יותר, וכמעט 10 מ'הורידו אותו;)
| Follow this link to see the latest Scanner changes: https://community.ingress.com/en/discussion/5036/ingress-prime-2-33-1-release-notes/ |
| גרסה | 2.33.1 (2033001) |
| תאריך העלאה | |
| גודל | 89.03 MB |
| עברי | לא |
| אנדרואיד | 5.0+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
| Follow this link to see the latest Scanner changes: https://community.ingress.com/en/discussion/5036/ingress-prime-2-33-1-release-notes/ |
| גרסה | 2.32.2 (2032002) |
| תאריך העלאה | |
| גודל | 88.71 MB |
| עברי | לא |
| אנדרואיד | 5.0+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
| Follow this link to see the latest Scanner changes: https://community.ingress.com/en/discussion/4004/ingress-prime-2-31-2-release-notes/ |
| גרסה | 2.31.2 (2031002) |
| תאריך העלאה | |
| גודל | 89.16 MB |
| עברי | לא |
| אנדרואיד | 5.0+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
| Follow this link to see the latest Scanner changes: https://community.ingress.com/en/discussion/1619/ingress-prime-v-2-25-2-release-notes |
| גרסה | 2.25.2 (2025002) |
| תאריך העלאה | |
| גודל | 85.52 MB |
| עברי | לא |
| אנדרואיד | 4.4+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
| Follow this link to see the latest Scanner changes: https://www.facebook.com/Ingress |
| גרסה | 2.22.2 (2022002) |
| תאריך העלאה | |
| גודל | 81.46 MB |
| עברי | לא |
| אנדרואיד | 4.4+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
| Follow these links to see the latest Scanner changes: https://plus.google.com/+Ingress https://www.facebook.com/Ingress |
| גרסה | 2.20.3 (2020003) |
| תאריך העלאה | |
| גודל | 79.92 MB |
| עברי | לא |
| אנדרואיד | 4.4+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
| Follow these links to see the latest Scanner changes: https://plus.google.com/+Ingress https://www.facebook.com/Ingress |
| גרסה | 2.20.2 (2020002) |
| תאריך העלאה | |
| גודל | 79.88 MB |
| עברי | לא |
| אנדרואיד | 4.4+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
| Follow these links to see the latest Scanner changes: https://plus.google.com/+Ingress https://www.facebook.com/Ingress |
| גרסה | 2.18.2 (2019002) |
| תאריך העלאה | |
| גודל | 80.63 MB |
| עברי | לא |
| אנדרואיד | 4.4+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
| Follow these links to see the latest Scanner changes: https://plus.google.com/+Ingress https://www.facebook.com/Ingress |
| גרסה | 2.16.2 (2016002) |
| תאריך העלאה | |
| גודל | 80.16 MB |
| עברי | לא |
| אנדרואיד | 4.4+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
| Follow these links to see the latest Scanner changes: https://plus.google.com/+Ingress https://www.facebook.com/Ingress |
| גרסה | 2.15.2 (2015002) |
| תאריך העלאה | |
| גודל | 79.97 MB |
| עברי | לא |
| אנדרואיד | 4.4+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
| Follow these links to see the latest Scanner changes: https://plus.google.com/+Ingress/posts/ https://www.facebook.com/Ingress/photos/ |
| גרסה | 2.14.3 (2014003) |
| תאריך העלאה | |
| גודל | 80.9 MB |
| עברי | לא |
| אנדרואיד | 4.4+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
| Follow these links to see the latest scanner changes. https://plus.google.com/+Ingress/posts/i3cTb3u27CT https://www.facebook.com/Ingress/photos/a.463739937007011/2015302131850776 |
| גרסה | 2.13.1 (2013001) |
| תאריך העלאה | |
| גודל | 81.06 MB |
| עברי | לא |
| אנדרואיד | 4.4+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
| גרסה | 2.12.0 (2012000) |
| תאריך העלאה | |
| גודל | 78.46 MB |
| עברי | לא |
| אנדרואיד | 4.4+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
| גרסה | 2.11.2 (2011002) |
| תאריך העלאה | |
| גודל | 78.34 MB |
| עברי | לא |
| אנדרואיד | 4.4+ |
| ארכיטקטורה | ARM7 |
| הקובץ מסומן |
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
| Agents, The Ingress Scanner has been updated to version 1.131.2. The following changes have been detected: - Bugfix for the current Android login problem. https://www.ingress.com/events http://investigate.ingress.com |
| גרסה | 1.131.2 (11312) |
| תאריך העלאה | |
| גודל | 43.47 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Agents, The Ingress Scanner has been updated to version 1.131.0. The following changes have been detected: - ADA has performed multivariate analysis and can now detect Aegis Shields and Quantum Capsules - Additional classified modifications to Scanner codebase. https://www.ingress.com/events https://bio.ingress.com http://investigate.ingress.com |
| גרסה | 1.131.0 (11310) |
| תאריך העלאה | |
| גודל | 43.47 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Agents, The Ingress Scanner has been updated to version 1.130.0. The following changes have been detected: - Additional classified modifications to Scanner codebase. https://www.ingress.com/events https://bio.ingress.com http://investigate.ingress.com |
| גרסה | 1.130.0 (11300) |
| תאריך העלאה | |
| גודל | 43.44 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Agents, The Ingress Scanner has been updated to version 1.129.2. The following changes have been detected: - Visur has ported AXA shields to a new XM object called the 'Aegis Shield'. - IQTech-East will now be distributing MUFG capsules as 'Quantum Capsules'. - Additional classified modifications to Scanner codebase. https://www.ingress.com/events https://bio.ingress.com http://investigate.ingress.com |
| גרסה | 1.129.2 (11292) |
| תאריך העלאה | |
| גודל | 43.48 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Agents, The Ingress Scanner has been updated to version 1.128.0. The following changes have been detected: - Additional classified modifications to Scanner codebase. https://www.ingress.com/events https://bio.ingress.com http://investigate.ingress.com |
| גרסה | 1.128.0 (11280) |
| תאריך העלאה | |
| גודל | 43.71 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Agents, The Ingress Scanner has been updated to version 1.128.0. The following changes have been detected: - Additional classified modifications to Scanner codebase. https://www.ingress.com/events https://bio.ingress.com http://investigate.ingress.com |
| גרסה | 1.127.0 (11270) |
| תאריך העלאה | |
| גודל | 43.71 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Agents, The Ingress Scanner has been updated to version 1.127.0. The following changes have been detected: - Additional classified modifications to Scanner codebase. https://www.ingress.com/events https://bio.ingress.com http://investigate.ingress.com |
| גרסה | 1.126.0 (11260) |
| תאריך העלאה | |
| גודל | 43.7 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Agents, The Ingress Scanner has been updated to version 1.124.0. The following changes have been detected: - Additional classified modifications to Scanner codebase. https://www.ingress.com/events https://bio.ingress.com http://investigate.ingress.com |
| גרסה | 1.124.0 (11240) |
| תאריך העלאה | |
| גודל | 43.75 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Agents, The Ingress Scanner has been updated to version 1.123.0. The following changes have been detected: - Additional classified modifications to Scanner codebase. https://www.ingress.com/events https://bio.ingress.com http://investigate.ingress.com |
| גרסה | 1.123.0 (11230) |
| תאריך העלאה | |
| גודל | 43.75 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Agents, The Ingress Scanner has been updated to version 1.122.0. The following changes have been detected: - Magnus Reawakens anomaly series updates. - Additional classified modifications to Scanner codebase. https://www.ingress.com/events https://bio.ingress.com http://investigate.ingress.com |
| גרסה | 1.122.0 (11220) |
| תאריך העלאה | |
| גודל | 43.75 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Agents, The Ingress Scanner has been updated to version 1.121.0. The following changes have been detected: - Additional classified modifications to Scanner codebase. https://www.ingress.com/events https://bio.ingress.com http://investigate.ingress.com |
| גרסה | 1.121.0 (11210) |
| תאריך העלאה | |
| גודל | 43.73 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Agents, The Ingress Scanner has been updated to version 1.120.2. The following changes have been detected: - Recent information revealed the development of a dual variant Portal Mod: The ITO EN Transmuter (+)/(-), which may be capable of transforming the hack output of Portals. The Scanner has been retrofitted to support their discovery and use.
- Additional classified modifications to Scanner codebase. https://www.ingress.com/events https://bio.ingress.com http://investigate.ingress.com |
| גרסה | 1.120.2 (11202) |
| תאריך העלאה | |
| גודל | 43.73 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Agents, visit https://bio.ingress.com to create personalized player bio cards. Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.118.0 * Enabled portal submissions in South Korea & Brazil * Bugfixes |
| גרסה | 1.119.0 (11190) |
| תאריך העלאה | |
| גודל | 43.27 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Agents, visit https://bio.ingress.com to create personalized player bio cards. Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.117.0 * Bugfixes |
| גרסה | 1.117.0 (11170) |
| תאריך העלאה | |
| גודל | 42.82 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Agents, visit https://bio.ingress.com to create personalized player bio cards. Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.116.0 * Bugfixes |
| גרסה | 1.116.0 (11160) |
| תאריך העלאה | |
| גודל | 42.93 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.115.0 * Bugfixes |
| גרסה | 1.115.0 (11150) |
| תאריך העלאה | |
| גודל | 42.93 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.114.0 * Bugfixes |
| גרסה | 1.114.0 (11140) |
| תאריך העלאה | |
| גודל | 42.93 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.113.0 * Scanner updated to allow for detection and interaction with new XM Shards recently discovered in Portal Network. * Bugfixes |
| גרסה | 1.113.0 (11130) |
| תאריך העלאה | |
| גודל | 42.93 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.112.0 * Deprecated Panoramio images. Agents, be on the lookout for portals that display [ADD PHOTO]. This could be your chance to be Ingress fameish. * Bugfixes |
| גרסה | 1.112.0 (11120) |
| תאריך העלאה | |
| גודל | 42.81 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.111.0 * Apple notification fixes * Bugfixes |
| גרסה | 1.111.0 (11110) |
| תאריך העלאה | |
| גודל | 42.75 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.110.0 * Bugfixes |
| גרסה | 1.110.0 (11100) |
| תאריך העלאה | |
| גודל | 42.75 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.109.0 * Bugfixes |
| גרסה | 1.109.0 (11090) |
| תאריך העלאה | |
| גודל | 42.75 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.108.1 * Via Noir anomaly updates |
| גרסה | 1.108.1 (11081) |
| תאריך העלאה | |
| גודל | 42.75 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.107.0 * Added feature permission for raw gps access * Access Ingress Investigation from community tab * Unexpected variance detected in A Detection Algorithm welcome module |
| גרסה | 1.107.0 (11070) |
| תאריך העלאה | |
| גודל | 42.66 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.106.1 * Attempting reinit 080483be <main>: 80483be: 8d 4c 24 04 lea 0x4(%esp),%ecx 80483c2: 83 e4 f0 and $0xfffffff0,%esp 80483c5: ff 71 fc pushl 0xfffffffc(%ecx) 80483c8: 55 push %ebp |
| גרסה | 1.106.1 (11061) |
| תאריך העלאה | |
| גודל | 42.72 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.106.0 * Via Lux preparation * Speech pack bugfix |
| גרסה | 1.106.0 (11060) |
| תאריך העלאה | |
| גודל | 42.61 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.105.1 * ADA can now detect the Japanese language |
| גרסה | 1.105.1 (11051) |
| תאריך העלאה | |
| גודל | 42.53 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes We're hiring check out our open positions, http://www.nianticlabs.com/jobs/ Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.104.1 * Fixed mapping tile crash |
| גרסה | 1.104.1 (11041) |
| תאריך העלאה | |
| גודל | 35.16 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes We're hiring check out our open positions, http://www.nianticlabs.com/jobs/ Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.104.0 * Increased log collection for client crashes |
| גרסה | 1.104.0 (11040) |
| תאריך העלאה | |
| גודל | 35.16 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| Client Release Notes We're hiring check out our open positions, http://www.nianticlabs.com/jobs/ Join the investigation to uncover the truth behind the portals at http://investigate.ingress.com Checkout upcoming Ingress events at http://www.ingress.com/events FEATURES/FIXES v1.103.0 * New safety warning screen on startup * Fixed the button enabled state for Lawson cubes in extended fire menu * Fixed mod deploy button UI |
| גרסה | 1.103.0 (11030) |
| תאריך העלאה | |
| גודל | 35.15 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.102.0 (11020) |
| תאריך העלאה | |
| גודל | 35.15 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.101.2 (11012) |
| תאריך העלאה | |
| גודל | 35.15 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.100.0 (11000) |
| תאריך העלאה | |
| גודל | 35.13 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.99.1 (10991) |
| תאריך העלאה | |
| גודל | 35.1 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.98.1 (10981) |
| תאריך העלאה | |
| גודל | 35.06 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.97.1 (10971) |
| תאריך העלאה | |
| גודל | 35.06 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.96.0 (10960) |
| תאריך העלאה | |
| גודל | 35.05 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.95.1 (10951) |
| תאריך העלאה | |
| גודל | 35.19 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.94.1 (10941) |
| תאריך העלאה | |
| גודל | 34.85 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.93.1 (10931) |
| תאריך העלאה | |
| גודל | 32.06 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.92.1 (10921) |
| תאריך העלאה | |
| גודל | 31.7 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.91.0 (10910) |
| תאריך העלאה | |
| גודל | 31.66 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.90.1 (10901) |
| תאריך העלאה | |
| גודל | 31.66 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.89.1 (10891) |
| תאריך העלאה | |
| גודל | 31.65 MB |
| עברי | לא |
| אנדרואיד | 4.0+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.88.0 (10880) |
| תאריך העלאה | |
| גודל | 31.15 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.87.0 (10870) |
| תאריך העלאה | |
| גודל | 31.15 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.86.1 (10861) |
| תאריך העלאה | |
| גודל | 31.11 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.85.1 (10851) |
| תאריך העלאה | |
| גודל | 31.11 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.83.5 (10835) |
| תאריך העלאה | |
| גודל | 30.58 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.83.2 (10832) |
| תאריך העלאה | |
| גודל | 30.58 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.83.1 (10831) |
| תאריך העלאה | |
| גודל | 30.58 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.81.0 (10810) |
| תאריך העלאה | |
| גודל | 30.12 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.79.0 (10790) |
| תאריך העלאה | |
| גודל | 28.62 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.77.1 (10771) |
| תאריך העלאה | |
| גודל | 28.49 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.77.0 (10770) |
| תאריך העלאה | |
| גודל | 28.49 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.76.0 (10760) |
| תאריך העלאה | |
| גודל | 28.27 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.75.0 (10750) |
| תאריך העלאה | |
| גודל | 27.59 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.73.1 (10731) |
| תאריך העלאה | |
| גודל | 27.86 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.72.0 (10720) |
| תאריך העלאה | |
| גודל | 27.7 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.71.1 (10711) |
| תאריך העלאה | |
| גודל | 27.3 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.70.0 (10700) |
| תאריך העלאה | |
| גודל | 26.92 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.69.1 (10691) |
| תאריך העלאה | |
| גודל | 26.85 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.68.0 (10680) |
| תאריך העלאה | |
| גודל | 25.9 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
| גרסה | 1.65.0 (10650) |
| תאריך העלאה | |
| גודל | 25.25 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to read the contents of your USB storage.
| גרסה | 1.64.0 (10640) |
| תאריך העלאה | |
| גודל | 24.42 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to read the contents of your USB storage.
| גרסה | 1.59.1 (10591) |
| תאריך העלאה | |
| גודל | 24.42 MB |
| עברי | לא |
| אנדרואיד | 2.3+ |
| ארכיטקטורה | ARM7 ARM6 |
| הקובץ מסומן |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to request authentication tokens.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to control the vibrator.
Allows the app to write to the USB storage.
Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows an app to read the sync stats for an account, including the history of sync events and how much data is synced.
Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.
Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.
Allows the app to read the contents of your USB storage.
תשומת לב! כל קבצי יישומים מתארחים באישורו של המחברים או מוצאים זמין באופן חופשי באינטרנט, אם בכלל של הקבצים מפרים את זכויותיך,אנא יידעו אותנו