להורדה Gumballs & מבוכים 0.49.240409.03-4.22.92 עבור אנדרואיד Acer Iconia B1-721

משחקים ל-Android / ארקייד /

3.6 (5)

Gumballs & מבוכים

ראה APKs זמינים

היישום הוא תואם את המכשיר שנבחר עבור Acer Iconia B1-721

תיאור:

Gumballs מבוכים הוא משחק תפקידים עבור אנדרואיד, אשר די בהצלחה ספג את הרגעים הטובים ביותר מז'אנרים אחרים, כגון אסטרטגיה קלסית ואפילו השלט! הוכן על ידי משחק בסטודיו Qcplay המוגבל., עם מי אנחנו לא פגשנו, שכן חלק הארי של הפרויקטים שלה מכוונים לשוק המקומי של מדינות אסיה זה לא מנעו מהם מלעשות פרויקט ראוי, זמינים ברחבי העולם.

המשחקיות תבקשנה ממך לצאת למסע מיסטי מלא מסתורין והרפתקה, אשר כרגיל מתמלא בדרך לא מוכרת לך. יתר על כן, המפתחים מבטיחים משחק יוצא דופן, שונה מאוד משחקי התפקידים המוכרים שבו הערך העיקרי - הדירוג מייד להיות מתמודדים עם אתגרים אמיתיים וסיכונים שצריכים להילקח וכדי להיות מוכן להם!
הרעיון של הטיול הוא הצורך להשמיד את השליט המרושע של Erathia היבשת (הלו מתוך גיבורי המשחק?), אשר, כרגיל, התפרסם בזכות טרור, והקיף עצמו יפצע במתכונת של שדים ומפלצות אחרות, שבו אתה צריך להילחם. הבחירה תהיה ארבע כיתות של תווים:

דמות שמעדיפה חרב כדי לפתור את כל הבעיות
צייד שד מיוחד
דמות עם הספר, הוא קוסם
אביר מוות עגום אך יעיל

בנוסף הקרבות אתה בהחלט צריך להרוויח כסף כדי לשכור עזרה בצורת חיילים אחרים בחלק זה של המשחק דומה השלט. להרוויח כסף אתה יכול ללכת לתוך הצינוק, שם תמצא הרבה אויבים אוצרים אמיתי, שבו ניתן גילוי רכיב קרבות תפקידים ואת החלק הטקטי, מיוחס האסטרטגיה בכללותה, יהיה כיף, לפחות!

מאפיינים:

בכל שלב אתה צריך לקחת סיכונים למען משחקניה
יותר מ תריסר קלפים ורמות נסתרות רבות
לצבור משאבים ולבנות צי לתקוף את הטירה באוויר
תמצוץ דמויותיו כך שהם הופכים רלוונטיים שלב חדש
לפתח סדנה שמביאה הכנסה פסיבית
סיפורים ארוכים היוצרים סיפור מלא

חסרונות משחקים:

דונט הגון

שורה תחתונה: משחק gumballs מבוכי שחקנים ראשונים מכור שאוהבים משחקים מאתגרים ומגוון של קשיים, כמו גם את המאפיינים שכל אחד כרטיס שונה כאן ואת המפלצת, ולאחר מכן את המסה של תוכן זה!

פרסומת

להורדה Gumballs & מבוכים 0.49.240409.03-4.22.92 עבור Acer Iconia B1-721

מידע כללי

גרסה	0.49.240409.03-4.22.92 (102)
תאריך העלאה	2024-04-13 01:01
גודל	99.87 MB
עברי	לא

דרישות

אנדרואיד	4.1+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MOUNT_UNMOUNT_FILESYSTEMS

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MOUNT_UNMOUNT_FILESYSTEMS

Gumballs & DungeonsG&D 0.49.231121.03-4.22.79 / 2023-12-13

מידע כללי

גרסה	0.49.231121.03-4.22.79 (100)
תאריך העלאה	2023-12-13 02:22
גודל	99.82 MB
עברי	לא

דרישות

אנדרואיד	4.1+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MOUNT_UNMOUNT_FILESYSTEMS

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MOUNT_UNMOUNT_FILESYSTEMS

Gumballs & DungeonsG&D 0.49.230822.03-4.22.68 / 2023-08-29

מידע כללי

גרסה	0.49.230822.03-4.22.68 (99)
תאריך העלאה	2023-08-29 06:11
גודל	99.48 MB
עברי	לא

דרישות

אנדרואיד	4.1+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MOUNT_UNMOUNT_FILESYSTEMS

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MOUNT_UNMOUNT_FILESYSTEMS

Gumballs & DungeonsG&D 0.49.220420.03-4.22.15 / 2022-07-17

חדש בגרסה זו

1. Optimizes game features and functions for a satisfying gaming experience

מידע כללי

גרסה	0.49.220420.03-4.22.15 (95)
תאריך העלאה	2022-07-17 02:33
גודל	94.28 MB
עברי	לא

דרישות

אנדרואיד	4.1+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MOUNT_UNMOUNT_FILESYSTEMS

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MOUNT_UNMOUNT_FILESYSTEMS

Gumballs & DungeonsG&D 0.49.210930.03-4.20.3 / 2021-11-02

מידע כללי

גרסה	0.49.210930.03-4.20.3 (92)
תאריך העלאה	2021-11-02 12:17
גודל	100.63 MB
עברי	לא

דרישות

אנדרואיד	4.1+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MOUNT_UNMOUNT_FILESYSTEMS

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MOUNT_UNMOUNT_FILESYSTEMS

Gumballs & DungeonsG&D 0.49.210930.03-4.20.3 / 2021-10-05

מידע כללי

גרסה	0.49.210930.03-4.20.3 (90)
תאריך העלאה	2021-10-05 10:20
גודל	100.41 MB
עברי	לא

דרישות

אנדרואיד	4.1+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MOUNT_UNMOUNT_FILESYSTEMS

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to read the contents of your USB storage.

MOUNT_UNMOUNT_FILESYSTEMS

Gumballs & DungeonsG&D 0.49.210729.03-4.18.6 / 2021-08-09

חדש בגרסה זו

1. The new maze "City of Oblivion": To fight with the walking dead in doomsday
2. The annual event "Gumball Carnival" with abundant game resources rewards

מידע כללי

גרסה	0.49.210729.03-4.18.6 (87)
תאריך העלאה	2021-08-09 19:01
גודל	98.68 MB
עברי	לא

דרישות

אנדרואיד	4.1+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Gumballs & DungeonsG&D 0.49.200626.03-4.6.2 / 2020-07-12

חדש בגרסה זו

1. Optimize the UI page display.
2. Upgrade the SDK for Facebook and Google.
3. Develop the Apple account login.

מידע כללי

גרסה	0.49.200626.03-4.6.2 (85)
תאריך העלאה	2020-07-12 18:38
גודל	97.48 MB
עברי	לא

דרישות

אנדרואיד	4.1+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Gumballs & DungeonsG&D 0.49.200528.03-4.5.5 / 2020-06-03

חדש בגרסה זו

1. Optimize the UI page display.
2. Upgrade the SDK for Facebook and Google.
3. Develop the Apple account login.

מידע כללי

גרסה	0.49.200528.03-4.5.5 (84)
תאריך העלאה	2020-06-03 07:49
גודל	100.12 MB
עברי	לא

דרישות

אנדרואיד	4.1+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Gumballs & DungeonsG&D 0.49.200519.03-4.5.1 / 2020-05-29

חדש בגרסה זו

1. Optimize the UI page display.
2. Upgrade the SDK for Facebook and Google.
3. Develop the Apple account login.

מידע כללי

גרסה	0.49.200519.03-4.5.1 (83)
תאריך העלאה	2020-05-29 09:26
גודל	100.04 MB
עברי	לא

דרישות

אנדרואיד	4.1+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Gumballs & DungeonsG&D 0.49.191128.03-3.8.1 / 2019-12-18

חדש בגרסה זו

>>What's New
1. Linkage Event with Sdorica
2. Brand New Maze
3. Unlock New Gumballs
4. Unlock New Easter Eggs

>>Optimization
1. Detected bugs have been fixed

מידע כללי

גרסה	0.49.191128.03-3.8.1 (80)
תאריך העלאה	2019-12-18 21:19
גודל	91.44 MB
עברי	לא

דרישות

אנדרואיד	4.0.3+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Gumballs & DungeonsG&D 0.49.190929.03-3.4.45 / 2019-10-06

חדש בגרסה זו

>>What's New
1.Unlock Gumballs‘ trials: Guardian, Bull Demon King, Dimension Walker, DJ
2.Linkage event: Signal Station: No.1 will be released in September
3. M09 will be unlocked in September

>>Optimization
1. Enrich sky event rewards
2. Add the notice for overflowing resources
3. Detected bugs have been fixed

מידע כללי

גרסה	0.49.190929.03-3.4.45 (75)
תאריך העלאה	2019-10-06 17:49
גודל	88.51 MB
עברי	לא

דרישות

אנדרואיד	4.0.3+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Gumballs & DungeonsG&D 0.49.190830.03-3.4.25 / 2019-09-12

חדש בגרסה זו

>>What's New
1.Unlock Gumballs‘ trials: Guardian, Bull Demon King, Dimension Walker, DJ
2.Linkage event: Signal Station: No.1 will be released in September
3. M09 will be unlocked in September

>>Optimization
1. Enrich sky event rewards
2. Add the notice for overflowing resources
3. Detected bugs have been fixed

מידע כללי

גרסה	0.49.190830.03-3.4.25 (71)
תאריך העלאה	2019-09-12 11:22
גודל	88.46 MB
עברי	לא

דרישות

אנדרואיד	4.0.3+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Gumballs & DungeonsG&D 0.49.190722.03-3.4.1 / 2019-08-12

חדש בגרסה זו

【Function】
1. Release the events for 88 Gumball Carnival
2. Unlock the new maze Bracada College
3. Unlock the maze cartoons
4. Unlock a batch of new links for Chain of Fate

【Optimization】
1. Adjust the rewards for Spending Return Package
2. Add some hidden events in the mazes
3. Adjust the Elemental Shield of Elemental Shaman
4. Increase the ceiling of daily alliance coins for bounty missions
5. Adjust the daily sign-in rewards
6. Fix the detected bugs

מידע כללי

גרסה	0.49.190722.03-3.4.1 (65)
תאריך העלאה	2019-08-12 16:40
גודל	88.91 MB
עברי	לא

דרישות

אנדרואיד	4.0.3+
ארכיטקטורה	ARM8 ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to read the contents of your USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Gumballs & DungeonsG&D 0.48.190523.03-3.2.3 / 2019-05-28

חדש בגרסה זו

>>What's New
1.Unlock Order Field M07
2.Unlock Gumballs‘ trials: Joan, Noble, Cyclops and Semi-Finished Product
3.Unlock rapid food synthesis function
4.Unlock some higher-level sky events

>>Optimization
1.Optimize details and performances of newly unlocked sky events
2.Optimize Cosmic Trader interface display
3.Optimize Licked Lollipop effect, replace valid in this floor with last for 99 rounds
4.Detected bugs have been fixed

מידע כללי

גרסה	0.48.190523.03-3.2.3 (64)
תאריך העלאה	2019-05-28 04:21
גודל	96.12 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.48.190517.03-3.2.1 / 2019-05-23

חדש בגרסה זו

>>What's New
1.Unlock Order Field M07
2.Unlock Gumballs‘ trials: Joan, Noble, Cyclops and Semi-Finished Product
3.Unlock rapid food synthesis function
4.Unlock some higher-level sky events

>>Optimization
1.Optimize details and performances of newly unlocked sky events
2.Optimize Cosmic Trader interface display
3.Optimize Licked Lollipop effect, replace valid in this floor with last for 99 rounds
4.Detected bugs have been fixed

מידע כללי

גרסה	0.48.190517.03-3.2.1 (63)
תאריך העלאה	2019-05-23 07:04
גודל	96.07 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.48.190314.03-3.1.1 / 2019-05-16

חדש בגרסה זו

>>What's New
1. Unlock Order Field M06.
2. Unlock event 'Cosmos Burning'. Holy Warrior’s Fragments and Pegasus's Saint Dress can be obtained in this event.
3. Unlock Alliance Blacklist function.
4. Unlock Raid Licence function. Special item 'Regression Sandglass' will be available in the Circus Big Package.

>>Optimization
1. Descriptions of some technical items have been optimized.
2. Notice of device association has been optimized.
3. Detected bugs have been fixed.

מידע כללי

גרסה	0.48.190314.03-3.1.1 (62)
תאריך העלאה	2019-05-16 01:34
גודל	93.58 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.48.181214.03-2.9.2 / 2019-01-23

חדש בגרסה זו

>>What's New
1. Unlock a storyline maze
2. Unlock Order Domain M05
3. Unlock reagent labeling

>>Optimization
1. Optimize Technology Hall
2. Certain outer domain properties are added
3. Tower of Eternity is expanded
4. Some information bars
5. New items are added in the Hall of Overlooking
6. Optimize on strategic recovery and analysis of space
7. The upper limit of World Tree level is increased
8. All types of point rewards are expanded
9. New combos are added
10. Known bugs have been fixed

מידע כללי

גרסה	0.48.181214.03-2.9.2 (61)
תאריך העלאה	2019-01-23 05:30
גודל	99.19 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.47.181012.03-2.8.1 / 2018-10-30

חדש בגרסה זו

>>What's New
1. Unlocked a new Starfield-Elula
2. Unlocked a new Gumball-Wilderness Hunter
3. Unlocked Halloween Event
4. Unlocked review function in some places
5. Unlocked some Gumball's hidden events (unlocked easter eggs of Ripper, Spy, Gang Cadre and Templar)
6. Unlocked sky event Vincent
>>Optimization
1.Improved the performance of the game
2.Fixed some known bugs

מידע כללי

גרסה	0.47.181012.03-2.8.1 (58)
תאריך העלאה	2018-10-30 16:12
גודל	94.11 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.46.180903.03-2.6.8 / 2018-09-22

חדש בגרסה זו

>>What's New
1.Unlocked the Mysterious Islet System
2.Unlocked the Order Field M02
3.Unlocked the Nano Core Event
4.New Gumballs: Sugar, Ray Adas, Hella

>>Optimization
1.Improved the performance of the game
2.Fixed some known bugs

מידע כללי

גרסה	0.46.180903.03-2.6.8 (57)
תאריך העלאה	2018-09-22 18:55
גודל	91.74 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.46.180808.03-2.6.1 / 2018-08-25

חדש בגרסה זו

>>What's new
1.Unlocked the extra chapter maze Cloud Island
2.Unlocked Mercenary Camp Gumball: Joan, Dimension Walker, Psychic, Miser
3.Unlocked the Time Fragment exchange function of the high-dimensional space projection
4.Unlocked the Experiment Subject Gumball cultivation technology
>>Optimization
1.Improved the performance of the game
2.Fixed some known bugs

מידע כללי

גרסה	0.46.180808.03-2.6.1 (52)
תאריך העלאה	2018-08-25 03:29
גודל	98.04 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.44.180608.03-2.4.0 / 2018-06-15

חדש בגרסה זו

>>What's New
1.Unlocked the Shrine Ceremony
2.Added Trial Items in corresponding Exchange Store
3.Unlocked the event - Erathia Cup

>>Optimization
1.Improved the performance of the game
2.Fixed some known bugs

מידע כללי

גרסה	0.44.180608.03-2.4.0 (50)
תאריך העלאה	2018-06-15 10:16
גודל	92.77 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.42.180419.03-2.3.0 / 2018-05-23

חדש בגרסה זו

>>What's New
1.Unlocked new Eden maze--Eden's Land
2.Unlocked Clones system
3.Unlocked Wonders system in Hall of Overseeing

>>Optimization
1.Improved the performance of the game
2.Fixed some known bugs

מידע כללי

גרסה	0.42.180419.03-2.3.0 (49)
תאריך העלאה	2018-05-23 22:13
גודל	92.98 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.41.180403.03-2.2.4 / 2018-04-25

חדש בגרסה זו

>>What's New
1.Unlocked new Eden maze--Eden's Land
2.Unlocked Clones system
3.Unlocked Wonders system in Hall of Overseeing

>>Optimization
1.Improved the performance of the game
2.Fixed some known bugs

מידע כללי

גרסה	0.41.180403.03-2.2.4 (48)
תאריך העלאה	2018-04-25 07:44
גודל	95.2 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.41.180203.03-2.1.2 / 2018-02-10

חדש בגרסה זו

>>What's New

1.Added some Trigger Events (Behemoth, Eden Drift Bottle, Ancient Detection Device)

2.Unlocked main canon and halo effect of Behemoth

3.Added the ways to obtain Uranium Ore, Electricity, Gas and Accelerators: Alliance Store, Alien Merchant, Relics Boss

>>Optimization

1.Improved the performance of the game

2.Fixed some known bugs

מידע כללי

גרסה	0.41.180203.03-2.1.2 (47)
תאריך העלאה	2018-02-10 07:19
גודל	92.27 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.40.171212.03-1.10.1 / 2017-12-15

חדש בגרסה זו

>>What's New

Unlocked New Trial: Armor, Dwarf King, Sage, Dark Dragon

>>Optimization

1.Unified the mechanical gumballs required in hidden events of the mazes

2.Hera Main Cannon type was adjusted to Magic Cannon

3.Optimized the ordering rules of Combo Skills

4.Optimized the display rules of the in-game time

5.Optimized the quick-switch operation in the shop

>>Fixed

Fixed the known bugs

מידע כללי

גרסה	0.40.171212.03-1.10.1 (45)
תאריך העלאה	2017-12-15 10:45
גודל	96.73 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

RECEIVE_USER_PRESENT

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

RECEIVE_USER_PRESENT

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.39.171202.03-1.9.6 / 2017-12-07

חדש בגרסה זו

>>What's New

1. Added a new instance maze- Erathia

2. Added an event maze - Dungeon Village

3. Added a sky event maze - The Sixth Heaven

>>Optimization

1.Improved the performance of the game

2.Fixed some known bugs

מידע כללי

גרסה	0.39.171202.03-1.9.6 (43)
תאריך העלאה	2017-12-07 09:34
גודל	93.76 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

RECEIVE_USER_PRESENT

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to control the vibrator.

Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

RECEIVE_USER_PRESENT

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.37.170815.03-1.8.1 / 2017-08-18

חדש בגרסה זו

>>What's New

1.Unlocked Gumballs Trial: Gladiator,Odin,Bounty Hunter,Creator,Alchemist,King,Musashi,Death Knight

2.Unlocked new maze: Hell Frontier.

3.Added Demon title

4.Added new Airships: Arcane Snail,Traveler,Hovering,Overlord,UFO,Void Stingray,Cube

5.Added the function of Enhance Alchemy Workshop

6.Added a Relics Excavation

7.Unlocked new Gumballs of Mercenary Camp: Three-eye King,Nalakuvara,Heavenly King,Gumiho

8.Added new event maze:Mysterious Peanut Town

מידע כללי

גרסה	0.37.170815.03-1.8.1 (36)
תאריך העלאה	2017-08-18 15:11
גודל	86.8 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

record audio

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

record audio

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.36.170706.03-1.7.1 / 2017-07-10

חדש בגרסה זו

>>What's New

1.Added the Alliance Dissolution Function

2.Added Time-limited Quest Event

3.Added Alliance Mission System

4.Added New Gumballs: Orc, Paparazzi, Gang Cadre

5.Added New Gumball's Trial: Nelson, Witch

6.Added Burning Bonfire in Hero's Village

7.Added hidden events when Peter was selected in Adventurer's Forest

8.Added some new Combo Skills

9.Added some new Chain of Fate

>>Optimization

1.Improved the performance of the game

2.Fixed some known bugs

מידע כללי

גרסה	0.36.170706.03-1.7.1 (34)
תאריך העלאה	2017-07-10 13:53
גודל	80.32 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

record audio

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

record audio

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.35.170608.08-1.6.1 / 2017-06-19

חדש בגרסה זו

>>What's New

1.Unlocked Alliance Bounty Function

2.New Maze - Spacecraft Ruins & City of Death

3.New Gumballs: Trainer, Puppeteer, Goblin, Ripper, DJ, Geisha, Pandora, Chef

4.Unlocked Alliance Gift Package & Ranking & Authority management function

5.New Sky Events: Imprisoned Fairy, Lava Altar,...

6.Added Easter Egg: Awakening of Panda, Athena, Spartan, Sunflower

7.Added the following Gumballs' Trail

Swordsman, Athena, Priest, Magic Golem, Minstrel, Panda, Terminator, Claw

מידע כללי

גרסה	0.35.170608.08-1.6.1 (32)
תאריך העלאה	2017-06-19 15:54
גודל	77.88 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

record audio

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

record audio

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.34.170503.03-1.5.4 / 2017-06-10

חדש בגרסה זו

>>What's New

1.Unlocked Rank 6 Airship Function

Can exchange Airship Blueprints in the Alliance Shop which above Lv.10

2.Added Gumball's Statue Function

3.Added Sky Title System

4.Players can contact each other by Mail

5.Added 4 new Gumballs - Alien, Cupid, Merman, Frost Queen, can get them from Mercenary Camp

>>Optimization

1.Improved the performance of the game

2.Fixed some known bugs

מידע כללי

גרסה	0.34.170503.03-1.5.4 (31)
תאריך העלאה	2017-06-10 19:59
גודל	73.67 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

record audio

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

record audio

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.34.170422.03-1.5.1 / 2017-04-25

חדש בגרסה זו

>>What's New

1.Unlocked Rank 6 Airship Function

Can exchange Airship Blueprints in the Alliance Shop which above Lv.10

2.Added Gumball's Statue Function

3.Added Sky Title System

4.Players can contact each other by Mail

5.Added 4 new Gumballs - Alien, Cupid, Merman, Frost Queen, can get them from Mercenary Camp

>>Optimization

1.Improved the performance of the game

2.Fixed some known bugs

מידע כללי

גרסה	0.34.170422.03-1.5.1 (30)
תאריך העלאה	2017-04-25 07:02
גודל	73.3 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

record audio

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

record audio

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.33.170308.03-1.4.1 / 2017-03-13

חדש בגרסה זו

What's New

1.Unlock the most mysterious fairyland - Gate of Creation

2.Enhance Player's Interaction and Communication-Alliance and Chat function

3.New Maze - City of Steam

4.New Interactive Gameplay - Chain of Fate

5.News Gumballs - Zeros, Future cat and Peter

6.Fixed known bugs

7.Improved the performance of the game

מידע כללי

גרסה	0.33.170308.03-1.4.1 (29)
תאריך העלאה	2017-03-13 09:28
גודל	91.71 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

record audio

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

Allows the app to draw on top of other applications or parts of the user interface. They may interfere with your use of the interface in any application, or change what you think you are seeing in other applications.

record audio

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.32.170124.03-1.3.5 / 2017-02-10

חדש בגרסה זו

1.Improved the performance of the game

2.Fixed some known bugs

מידע כללי

גרסה	0.32.170124.03-1.3.5 (27)
תאריך העלאה	2017-02-10 10:37
גודל	90.02 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.32.170114.03-1.3.1 / 2017-01-19

חדש בגרסה זו

1.Improved the performance of the game

2.Fixed some known bugs

מידע כללי

גרסה	0.32.170114.03-1.3.1 (26)
תאריך העלאה	2017-01-19 10:52
גודל	90.07 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to access extra location provider commands. This may allow the app to interfere with the operation of the GPS or other location sources.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Gumballs & DungeonsG&D 0.31.161218.03-1.2.1 / 2017-01-09

חדש בגרסה זו

>>New Functions

1.Added New maze- Avallon Fortress

2.Enriched the contents of Fruit of World Tree Rewards

3.Added Celestial Medal Function

>>Optimization

1.Adjusted the effects of Swordsmanship Scrolls and Holy Glory

2.The Gumballs you haven't have will not be shown in the Gumball's Album.

3.Improved Gumball's ordering rules in the Training Room.

4.Replaced the background music of the map

5.Optimized some arts resources and effects

6.Improved the performance of the game

מידע כללי

גרסה	0.31.161218.03-1.2.1 (25)
תאריך העלאה	2017-01-09 11:05
גודל	85.46 MB
עברי	לא

דרישות

אנדרואיד	2.3+
ארכיטקטורה	ARM6

בדוק יישום

הקובץ מסומן

רשות

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

Allows the app to change the state of network connectivity.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to write to the USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

RECEIVE_USER_PRESENT

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to request authentication tokens.

INTERACT_ACROSS_USERS_FULL

כל היישומים Qcplay Limited. על mob-core.com

תשומת לב! כל קבצי יישומים מתארחים באישורו של המחברים או מוצאים זמין באופן חופשי באינטרנט, אם בכלל של הקבצים מפרים את זכויותיך,אנא יידעו אותנו

2017/01/12 08:00

משחקים אחרים Acer Iconia B1-721

Acer Iconia B1-721

גרסה: Android 4.2 (Jelly Bean)
מעבד: Dual-core 1.3)
תצוגה: 7.00", 1024x600
ממדים: 199 x 122.3 x 11.4 ממ

משחקים קשורים:

Clickers הזמן

4.5 (26)

השלט פנטזיה

4.4 (102)

גלקסי Clicker

4 (34)

ולוגר עבור נגיפי - Clicker

4 (49)

100 ימים - הישרדות זומבי

3.9 (38)

כוכב המוות Clicker

3.7 (29)

4.8 (116)

4.7 (73)

ארנב ג'ונגל הפעלה

4.6 (51)

פעולת ציפור כועסת!

4.6 (15)

4.6 (27)

אסטרואידים מציאות מוגברות

4.6 (16)

© 2011-2024 mob-core.com