3.7 (18)
تطبيق متوافق مع الجهاز المحدد إلى Samsung Galaxy Tab 2 7.0 P3100

وصف:

Yandex.Metro - أحد التطبيقات التي posoblyaet تنوي إعداد سفرهم في المترو. مع دعمه، يمكنك تمرير الوقت على الطريق واختيار أفضل مسار الميزات: • اختيار محطات الوجهة وظيفة في المخطط؛ • حساب الوقت الذي يستغرقه السفر بما في ذلك توقف؛ • اختيار عدة طرق؛ • طرق كل الطرق.
تتوفر في الدائرة مترو الانفاق التطبيق في موسكو وسانت بطرسبرغ وكييف، خاركوف ومينسك. البرنامج لل مفيدة جدا وضرورية لكل يوم.

إعلان

تحميل Yandex.Metro 3.6.9 إلى Samsung Galaxy Tab 2 7.0 P3100

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.9 (1213203)
تحميل التسجيل 2024-03-18 11:20
حجم 47.43 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.9 (1213202)
تحميل التسجيل 2024-03-18 11:21
حجم 45.77 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.9 (1213201)
تحميل التسجيل 2024-03-18 11:20
حجم 41.25 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.8 (1170503)
تحميل التسجيل 2023-10-19 20:04
حجم 45.11 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.8 (1170502)
تحميل التسجيل 2023-10-19 20:04
حجم 43.6 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.8 (1170501)
تحميل التسجيل 2023-10-19 20:04
حجم 39.14 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.7 (1123103)
تحميل التسجيل 2023-08-12 16:22
حجم 44.78 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.7 (1123102)
تحميل التسجيل 2023-08-12 16:23
حجم 43.29 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.7 (1123101)
تحميل التسجيل 2023-08-12 16:22
حجم 38.95 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to write to the USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

POST_NOTIFICATIONS

Allows the app to control the vibrator.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.6 (992603)
تحميل التسجيل 2022-09-02 22:16
حجم 44.73 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.6 (992602)
تحميل التسجيل 2022-09-02 22:17
حجم 42.15 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.6 (992601)
تحميل التسجيل 2022-09-02 22:17
حجم 38.89 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

FOREGROUND_SERVICE

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.4 (936502)
تحميل التسجيل 2021-10-05 11:05
حجم 41.75 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.4 (936501)
تحميل التسجيل 2021-10-05 11:05
حجم 38.54 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to control the vibrator.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.3 (861703)
تحميل التسجيل 2021-01-26 10:27
حجم 43.5 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.3 (861702)
تحميل التسجيل 2021-01-26 10:27
حجم 41.03 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.3 (861701)
تحميل التسجيل 2021-01-26 10:27
حجم 37.82 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.2 (859703)
تحميل التسجيل 2020-12-26 22:04
حجم 43.52 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.2 (859702)
تحميل التسجيل 2020-12-26 22:04
حجم 41.04 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.2 (859701)
تحميل التسجيل 2020-12-26 22:04
حجم 37.82 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.1 (844803)
تحميل التسجيل 2020-10-26 09:37
حجم 37.93 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.1 (844802)
تحميل التسجيل 2020-10-26 09:37
حجم 36.56 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6.1 (844801)
تحميل التسجيل 2020-10-26 09:37
حجم 33.82 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the contents of your USB storage.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6 (793203)
تحميل التسجيل 2020-01-16 01:51
حجم 36.32 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6 (793202)
تحميل التسجيل 2020-01-16 01:51
حجم 34.98 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 3.6 (793201)
تحميل التسجيل 2020-01-16 01:51
حجم 32.34 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
• You can now opt for a dark theme if that's what you're used to. Go to settings to turn it on.
• The station cards now show the time station crossings are open.
معلومات عامة
نص 3.5.3 (777903)
تحميل التسجيل 2019-12-22 13:42
حجم 36.25 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
• You can now opt for a dark theme if that's what you're used to. Go to settings to turn it on.
• The station cards now show the time station crossings are open.
معلومات عامة
نص 3.5.3 (777902)
تحميل التسجيل 2019-12-22 13:42
حجم 34.91 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
• You can now opt for a dark theme if that's what you're used to. Go to settings to turn it on.
• The station cards now show the time station crossings are open.
معلومات عامة
نص 3.5.3 (777901)
تحميل التسجيل 2019-12-18 21:32
حجم 32.27 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
• You can now opt for a dark theme if that's what you're used to. Go to settings to turn it on.
• The station cards now show the time station crossings are open.
معلومات عامة
نص 3.5.3 (777901)
تحميل التسجيل 2019-12-22 13:42
حجم 32.27 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
• You can now opt for a dark theme if that's what you're used to. Go to settings to turn it on.
• The station cards now show the time station crossings are open.
معلومات عامة
نص 3.5.1 (775602)
تحميل التسجيل 2019-10-26 15:12
حجم 34.91 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
• You can now opt for a dark theme if that's what you're used to. Go to settings to turn it on.
• The station cards now show the time station crossings are open.
معلومات عامة
نص 3.5 (752302)
تحميل التسجيل 2019-10-10 08:17
حجم 34.83 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
• Tap a station and view the map unobstructed: the "To" and "From" buttons now appear on the card. Enable the "Choose station by tapping" option and open cards by tapping and holding the map.
• Learn from the app when it's quicker to take taxi instead of metro.
• Metro maps of Budapest, Warsaw, Dubai, Prague, Rome and Helsinki now available.
معلومات عامة
نص 3.4 (735002)
تحميل التسجيل 2019-09-22 04:24
حجم 34.02 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
• Tap a station and view the map unobstructed: the "To" and "From" buttons now appear on the card. Enable the "Choose station by tapping" option and open cards by tapping and holding the map.
• Learn from the app when it's quicker to take taxi instead of metro.
• Metro maps of Budapest, Warsaw, Dubai, Prague, Rome and Helsinki now available.
معلومات عامة
نص 3.4 (735001)
تحميل التسجيل 2019-09-22 04:24
حجم 31.43 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
May 15 is Metro Day, and we've prepared something special for you. Open the app on the 15th and do some exploring.
Also, using the app in landscape mode is now super convenient — check it out.
معلومات عامة
نص 3.2.1 (617801)
تحميل التسجيل 2019-05-15 19:31
حجم 28.93 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
• People living in St. Petersburg can now top up their Podorozhnik travel card in the app.
• The “From” and “To” fields have been added to route cards: you can easily change a station or switch the stations around.
• Route details show what time your train arrives at transit stations.
• More alternative routes are now available. If you think a route option is missing, let us know by tapping “Report error” in route details.
معلومات عامة
نص 3.1 (597603)
تحميل التسجيل 2019-04-18 18:07
حجم 22.56 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
We’ve completely updated Yandex.Metro — we revamped the design and added new features:
• There’s now more information on the map: line interchange types, airports and railway stations.
• Every station has an information card with working hours, exits and repair information.
• Warnings of renovations and closures are shown in search results, as well as in route details.
• The app supports TalkBack, so it can be used by people with visual impairments.
معلومات عامة
نص 3.0.1 (563303)
تحميل التسجيل 2019-04-01 18:10
حجم 21.65 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
We’ve completely updated Yandex.Metro — we revamped the design and added new features:
• There’s now more information on the map: line interchange types, airports and railway stations.
• Every station has an information card with working hours, exits and repair information.
• Warnings of renovations and closures are shown in search results, as well as in route details.
• The app supports TalkBack, so it can be used by people with visual impairments.
معلومات عامة
نص 3.0.1 (563302)
تحميل التسجيل 2019-03-18 11:34
حجم 20.63 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM8
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
We’ve completely updated Yandex.Metro — we revamped the design and added new features:
• There’s now more information on the map: line interchange types, airports and railway stations.
• Every station has an information card with working hours, exits and repair information.
• Warnings of renovations and closures are shown in search results, as well as in route details.
• The app supports TalkBack, so it can be used by people with visual impairments.
معلومات عامة
نص 3.0 (556301)
تحميل التسجيل 2019-03-14 14:25
حجم 18.84 MB
العربية لا
متطلبات
الروبوت 4.4+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to write to the USB storage.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Enjoy improved stability in map updates.
Easily navigate the growing Moscow metro system – the updated maps now include the most recently opened stations on Line 10 and Line 11 (the Large Circle Line).
معلومات عامة
نص 2.13 (2627)
تحميل التسجيل 2018-04-06 16:12
حجم 6.2 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Enjoy improved app stability and function, with fixes for the Istanbul map and line numbers.
Please let us know about your experience with the app by going to the About section in the Settings.
معلومات عامة
نص 2.12 (2496)
تحميل التسجيل 2017-12-19 09:37
حجم 6.16 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 2.11 (2384)
تحميل التسجيل 2017-12-15 10:34
حجم 6.03 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
• Enjoy improved app launch times.
• Your Yandex.Metro app icon now matches the shape of your other home screen icons.
• Thank you for your feedback! The correct expiration date for your “Unity” ticket will appear when you hold it to your phone.
• Check out the Gifts & Discounts section for special deals on food delivery and other offers from Yandex partners by tapping the icon in the bottom right of the map.
معلومات عامة
نص 2.9 (2026)
تحميل التسجيل 2017-08-16 07:26
حجم 6.04 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Bug fixes and improvements using your feedback.
معلومات عامة
نص 2.8 (1722)
تحميل التسجيل 2017-05-31 04:44
حجم 5.4 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
• Stay in the loop with metro news notifications. Tap on а notification to read the full news article.
• Navigate the Settings more easily with the latest interface update.
• The app saves your route, even if it's been running in the background for a while.
• Scan ticket data faster, with better accuracy.
Send us your feedback and requests by going to the About section in the Settings and tapping "Contact developers".
معلومات عامة
نص 2.7 (1653)
تحميل التسجيل 2017-04-13 05:42
حجم 5.36 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Check your Moscow metro tickets with the newly updated app. A couple of months ago, the Moscow Metro changed the format of its tickets. We've updated the app, so everything works now.
If you encounter any issues, please let us know using the "Contact developers" form on the "About" screen. Please note that some smartphone models cannot read Troika cards — their NFC modules aren't compatible with the card.
معلومات عامة
نص 2.6 (1207)
تحميل التسجيل 2017-01-10 06:41
حجم 5.46 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
• Get the journey map for the route of your choice - you will no longer be offered instead an alternative plan for your journey.
• View your metro maps and plan your journeys without ads - you can now close them with a single tap.
• See all the newly added metro stations and lines whenever you launch the app - the maps now update automatically provided you are connected to the internet.
• Enjoy improved app stability and location detection.
معلومات عامة
نص 2.5.1 (1177)
تحميل التسجيل 2016-12-10 06:52
حجم 5.36 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Plan your journey with ease – improvements made to zooming and scrolling.
معلومات عامة
نص 2.4.3 (1070)
تحميل التسجيل 2016-09-07 05:47
حجم 5.12 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Enjoy using Yandex.Metro on your Android 7.0 Nougat phone - the app has been tweaked to better fit in with this system release.
معلومات عامة
نص 2.42 (1062)
تحميل التسجيل 2016-08-28 05:48
حجم 3.69 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Many new bug fixes and improvements using your feedback.
معلومات عامة
نص 2.32 (233)
تحميل التسجيل 2016-07-13 12:10
حجم 3.77 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.20 (221)
تحميل التسجيل 2015-12-25 10:09
حجم 4.89 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.15 (216)
تحميل التسجيل 2015-11-07 09:31
حجم 4.76 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.10 (210)
تحميل التسجيل 2015-08-08 12:19
حجم 3.79 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.05 (205)
تحميل التسجيل 2015-05-26 13:39
حجم 3.49 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.00 (200)
تحميل التسجيل 2015-04-28 14:22
حجم 3.72 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.78 (178)
تحميل التسجيل 2015-03-17 14:02
حجم 2.41 MB
العربية لا
متطلبات
الروبوت 2.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.77 (177)
تحميل التسجيل 2015-03-03 12:00
حجم 2.41 MB
العربية لا
متطلبات
الروبوت 2.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.76 (176)
تحميل التسجيل 2015-02-18 00:10
حجم 2.41 MB
العربية لا
متطلبات
الروبوت 2.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.75 (175)
تحميل التسجيل 2014-12-01 19:12
حجم 2.46 MB
العربية لا
متطلبات
الروبوت 2.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.74 (174)
تحميل التسجيل 2014-11-09 21:09
حجم 2.41 MB
العربية لا
متطلبات
الروبوت 2.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 1.64 (164)
تحميل التسجيل 2013-05-22 13:41
حجم 1.95 MB
العربية لا
متطلبات
الروبوت 1.5+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to change the state of network connectivity.

Allows the app to write to the USB storage.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.

Allows the app to read the contents of your USB storage.

جميع التطبيقات Direct Cursus Computer Systems Trading LLC في mob-core.com

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك,واسمحوا لنا أن نعرف

2011/10/10 06:51
برامج أخرى Samsung Galaxy Tab 2 7.0 P3100

Samsung Galaxy Tab 2 7.0 P3100


نص: Android 4.2 (Jelly Bean)
معالج: Dual-core 1 GHz)
عرض: 7.00", 1024x600
أبعاد: 193.7 x 122.4 x 10.5 مم
تطبيقات ذات صلة:
© 2011-2024 mob-core.com