ألعاب للأندرويد / منطق /
0 (0)
Taptiles
الاطلاع على ملفات أبك المتاحة
تطبيق متوافق مع الجهاز المحدد إلى Samsung Galaxy S III CDMA

وصف:

لعبة ما جونغ Taptiles على الروبوت، والتي يمكن أن يعزى بأمان لهذا النوع من الألغاز، الألغاز قديمة جدا! أنت تعرف أن اللعبة الأصلية اخترع في الصين قبل عصرنا وتوقيت ظهورها يمكن الحكم فقط وفقا لأسطورة! وفقا لبعض المعلومات في تصميمه كان كونفوشيوس نفسه! ومع ذلك، فمن الآن موجودة وتعمل في مجال تطوير اللعبة استوديو Arkadium الألعاب، وهي ليست كونفوشيوس، وبطبيعة الحال، ولكن ليس المبتدئين في هذا العمل!

اذا كان هناك من لا يعرف ما جونغ الأصلي هو ليس تماما ما اعتدنا على رؤيته على جهاز الكمبيوتر أو شاشات هواتفهم، انها مقامرة، والمصممة لأربعة لاعبين، ولكن بالفعل على أساس من رقائق لها، تأسست سوليتير في عام 1981، والتي تم الأكثر شعبية بين الجماهير.
مطلوب هذه اللعبة لجعل الأصلي وجميلة في حد ذاته، إلى إشراك جميع أولئك الذين لعبوا الكثير من الأشكال الأخرى من مآس. لبدء العمل مع الرسومات - أنها جميلة وأنها حتى بخس. البلاط بت غير القياسية، أنها تشبه الدومينو الأصلي، وهنا يتم تنفيذها كما مكعبات والرسومات عليها، أيضا، ليس هو المعيار. ومع ذلك، فإن التغيير الأكثر أهمية - لعبة وسائط جديدة من قبل فلن قاء. وتستند جميع التصنيفات على أن الحاجة إلى تفكيك هذا أو ذاك الشكل، والتي بنيت في بداية المباراة، ثم يجب عليك أن تختار والنظام نفسه:


وبالإضافة إلى ذلك، في اللعبة سيكون لديك لانتظار المهام اليومية التي تسمح لكسب نقاط اضافية وتنافس ضد أصدقائك واللاعبين الآخرين على اليافطة.
ومن بين أوجه القصور ويمكن ملاحظة فقط وجود الدعاية النادر أن كنت على الاطلاق لا يمكن أن يضر، وبعض دونات هناك لا وجود له من حيث المبدأ.

خلاصة القول: إذا ما جونغ سوليتير الكلاسيكية متعب بالفعل، وTaptiles اللعبة بسهولة تصحيح هذا الوضع من خلال تقديم لكم الكلاسيكية المنقحة التي تبدو جيدة ومثيرة جدا للاهتمام، وتقدم وسائط لجميع أنواع اللاعبين.

إعلان

تحميل Taptiles 1.3.82 إلى Samsung Galaxy S III CDMA

Taptiles

تقدم
الجديد في هذا الإصدار
Internal code updates.
معلومات عامة
نص 1.3.82 (202310102)
تحميل التسجيل 2023-12-10 11:09
حجم 71.43 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

FOREGROUND_SERVICE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

FOREGROUND_SERVICE
Taptiles 1.3.75 / 2022-07-20

Taptiles

تقدم
الجديد في هذا الإصدار
Interstitials fix, ads providers fix, Conditions localization
معلومات عامة
نص 1.3.75 (75)
تحميل التسجيل 2022-07-20 19:10
حجم 71.11 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE
Taptiles 1.3.73 / 2022-01-09

Taptiles

تقدم
معلومات عامة
نص 1.3.73 (73)
تحميل التسجيل 2022-01-09 10:15
حجم 71.07 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE
Taptiles 1.3.39 / 2021-11-11

Taptiles

تقدم
معلومات عامة
نص 1.3.39 (59)
تحميل التسجيل 2021-11-11 05:51
حجم 93.12 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE
Taptiles 1.3.36 / 2021-08-22

Taptiles

تقدم
الجديد في هذا الإصدار
Applovin added
معلومات عامة
نص 1.3.36 (56)
تحميل التسجيل 2021-08-22 05:06
حجم 92.94 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE
Taptiles 1.3.33 / 2021-04-09

Taptiles

تقدم
الجديد في هذا الإصدار
Bug fixed
معلومات عامة
نص 1.3.33 (53)
تحميل التسجيل 2021-04-09 22:41
حجم 89.36 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE
Taptiles 1.3.25 / 2021-03-11

Taptiles

تقدم
الجديد في هذا الإصدار
- Score panel moved lower
- New locales imported
- When users play any game in Daily Challenges mode and time is finished but they still have tiles we need to show proposal - watch video and get additional minute.
- Special tiles should be added to Relax mode.
- User can activate Special tiles after rewarded video only.
معلومات عامة
نص 1.3.25 (45)
تحميل التسجيل 2021-03-11 04:03
حجم 89.3 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE
Taptiles 1.3.11 / 2021-02-19

Taptiles

تقدم
الجديد في هذا الإصدار
- New daily challenge features
- Bug fixes and speed improvements
معلومات عامة
نص 1.3.11 (37)
تحميل التسجيل 2021-02-19 03:44
حجم 53.55 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE
Taptiles 1.3.11 / 2020-10-22

Taptiles

تقدم
الجديد في هذا الإصدار
- New daily challenge features
- Bug fixes and speed improvements
معلومات عامة
نص 1.3.11 (37)
تحميل التسجيل 2020-10-22 13:12
حجم 53.55 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE
Taptiles 1.3.10 / 2020-10-10

Taptiles

تقدم
الجديد في هذا الإصدار
- New daily challenge features
- Bug fixes and speed improvements
معلومات عامة
نص 1.3.10 (36)
تحميل التسجيل 2020-10-10 05:25
حجم 53.51 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE
Taptiles 1.3.9 / 2020-09-24

Taptiles

تقدم
الجديد في هذا الإصدار
- Bug fixes and speed improvements
معلومات عامة
نص 1.3.9 (33)
تحميل التسجيل 2020-09-24 08:32
حجم 66.01 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE
Taptiles 1.3.5 / 2020-09-03

Taptiles

تقدم
الجديد في هذا الإصدار
- New daily challenge features
- Bug fixes and speed improvements
معلومات عامة
نص 1.3.5 (29)
تحميل التسجيل 2020-09-03 17:44
حجم 72.77 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE
Taptiles 1.3.2.2 / 2020-08-05

Taptiles

تقدم
الجديد في هذا الإصدار
Added push-notifications support
Bug fixes
معلومات عامة
نص 1.3.2.2 (26)
تحميل التسجيل 2020-08-05 16:30
حجم 81.08 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to prevent the device from going to sleep.

Allows the app to control the vibrator.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE
Taptiles 1.2.9 / 2020-07-12

Taptiles

تقدم
الجديد في هذا الإصدار
Added push-notifications support
Bug fixes
معلومات عامة
نص 1.2.9 (25)
تحميل التسجيل 2020-07-12 18:36
حجم 77.04 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Taptiles 1.2.9 / 2020-04-21

Taptiles

تقدم
الجديد في هذا الإصدار
- New daily challenge features
- Bug fixes and speed improvements
معلومات عامة
نص 1.2.9 (24)
تحميل التسجيل 2020-04-21 05:58
حجم 77.04 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Taptiles 1.2.7 / 2020-04-21

Taptiles

تقدم
الجديد في هذا الإصدار
- Bug fixes and speed improvements
معلومات عامة
نص 1.2.7 (21)
تحميل التسجيل 2020-04-21 05:58
حجم 78.94 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM7 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to control the vibrator.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the contents of your USB storage.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to control the vibrator.
Taptiles 1.0.1 / 2017-05-28

Taptiles

تقدم
الجديد في هذا الإصدار
- New daily challenge features
- Bug fixes and speed improvements
معلومات عامة
نص 1.0.1 (17)
تحميل التسجيل 2017-05-28 06:25
حجم 71.69 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 ARM6 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.
Taptiles 1.0.0 / 2017-02-14

Taptiles

تقدم
الجديد في هذا الإصدار
- New daily challenge features
- Bug fixes and speed improvements
معلومات عامة
نص 1.0.0 (11)
تحميل التسجيل 2017-02-14 09:55
حجم 71.39 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM7 ARM6 x86
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to control the vibrator.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to read the contents of your USB storage.

Taptiles

تقدم
جميع التطبيقات Arkadium Games في mob-core.com

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك,واسمحوا لنا أن نعرف

سوليتير
2017/02/17 09:51
ألعاب أخرى Samsung Galaxy S III CDMA

Samsung Galaxy S III CDMA

نص: Android 4.1 (Jelly Bean)
معالج: Dual-core 1.5 GHz)
عرض: 4.80", 1280x720
أبعاد: 137.2 x 71.1 x 7.6 مم
ألعاب ذات صلة:
منديل
3.7 (179)
كلوندايك سوليتير
3.4 (166)
ما جونغ 2
3.3 (75)
SWIP3
4.6 (17)
تاريخ NUMS
4.6 (40)
دفع الصندوق
4.6 (38)
المنطقة النيون
4.6 (22)
تسرب الأنابيب
4.6 (61)
خربش Alchimy
4.6 (15)
رسم Stickman: EPIC
4.6 (123)
المطبخ التدافع
4.6 (45)
عمل بغير إتقان
4.6 (22)
© 2011-2024 mob-core.com