اهتمام، والتطبيق غير متوافق مع الجهاز المحدد إلى Samsung Galaxy Note LTE 10.1 N8020
وصف:
لعبة eFootball PES 2020 هي لعبة كرة القدم على جهاز الأندرويد الخاص بك وبدون مبالغة فهي أفضل ممثل لهذا النوع ، على الأقل في الوقت الحالي. هناك أسباب لذلك ، مفهومة ، وسندرجها في قائمة.
وقد أعدوا اللعبة في استوديو KONAMI الشهير ، والذي لا يُعرف جيدًا لأولئك الذين يحبون الألعاب المحمولة حصريًا ، ولكن إذا كنت تحب صناعة الألعاب ، فقد تعلم أن KONAMI هي التي شاركت في إنشاء منتجات مثل FlatOut و Contra و Silent Hill و Crash Bandicoot و ليس فقط. بدأ تاريخ الشركة في اليابان عام 1969 ، لذا لم تنته الخبرة المكتسبة على مدى عقود.
لعبة eFootball PES 2020 ليست المشروع الأول للتوجه الرياضي لهذا المطور ، ولكن كما كتبنا أعلاه ، في الوقت الحالي هي الأكثر تقدمًا. من الجدير البدء بحقيقة أن اللعبة تم إنشاؤها على محرك Unreal Engine 4 ، الذي يستخدم بنشاط في الألعاب على أجهزة الكمبيوتر وأجهزة التحكم ، مما أثر بشكل واضح على طريقة اللعب ، وخاصة مكونها البصري.
ومع ذلك ، فإن حقيقة أن اللعبة بصريًا قريبة قدر الإمكان من وحدات التحكم ليست كل شيء. جانب آخر مما يحدث هو الميكانيكا ، حيث يسمح المحرك الجديد بالكثير وسوف تفهم ذلك بسرعة أثناء اللعبة. بالمناسبة ، جلبت التحديثات الأخيرة تكتيكات وحيل جديدة والعديد من الميزات المثيرة للاهتمام.
بالطبع ، هناك ناقص - اتضح أن اللعبة تتطلب الكثير على الأجهزة ومن المستحسن أن يكون لديك 2 غيغابايت على الأقل من ذاكرة الوصول العشوائي ورابط معالج / فيديو أعلى من المتوسط ، ولكن بشكل عام ، حتى نماذج الميزانية للهواتف والأجهزة اللوحية يمكن أن تتباهى بهذا الآن.
مميزات لعبة eFootball PES 2020 على الاندرويد:
محرك غير واقعي 4
عرض مرئي ممتاز
لعبة غنية ومثيرة للاهتمام
بالطبع ، اللعبة عبارة عن شبكة
7 فرق ولاعبين مشهورين
يستمر المشروع في تلقي التحديثات ، حيث يظهر الكثير من المحتوى المثير للاهتمام.
مساوئ اللعبة:
متطلبات الأجهزة عالية إلى حد ما
إن تحقيق الدخل ، كما قد تعتقد ، أمر فظيع - الكثير من عمليات الشراء والإعلان ، ولكن هذا هو الثمن المدفوع لحقيقة أنه يمكنك تنزيل اللعبة على android مجانًا.
خلاصة القول: بالطبع ، قد لا يوافق شخص ما على أن لعبة eFootball PES 2020 هي أفضل ممثل لهذا النوع ، ولكن من المستحيل تحدي أكثر من 50 مليون عملية تنزيل ، وهو مؤشر مهم للغاية!
إعلان
تحميل eFootball PES 2020 هناك 8.5.1 إلى Samsung Galaxy Note LTE 10.1 N8020
■ Feature Addition and Changes [Extras] > [Game Settings] > [Play Settings] > [Player Card Display] The "Display Load" of Game Plan can now be configured via the above. By selecting "Low", the display of reserve players in Game Plan will be fixed to 2 rows, thereby alleviating the display load.
Check out the News section in-game for more information.
معلومات عامة
نص
8.5.1 (308050101)
تحميل التسجيل
2024-05-10 02:05
حجم
61.39 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
■ Updates and Additions ・ Updated licenses. ・ Updated various in-game data.
Fixes for various other issues were also applied in this update. Check out the News section in-game for more information.
معلومات عامة
نص
8.5.0 (308050001)
تحميل التسجيل
2024-04-18 12:08
حجم
61.39 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
■ Feature Addition and Changes ・ Added new feature "Friends". Various other features have also been added to make it easier for users to play in Match Rooms with Friends. ・ Added new feature "Position Training" for users to acquire and add Position Proficiencies to players. ・ Added new feature "Edit Position" for users to freely position players.
Fixes for various other issues were also applied in this update. Check out the News section in-game for more information.
معلومات عامة
نص
8.4.0 (308040001)
تحميل التسجيل
2024-03-21 18:17
حجم
60.61 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
■ Updates and Additions ・ Updated various in-game data.
Fixes for various other issues were also applied in this update. Check out the News section in-game for more information.
معلومات عامة
نص
8.3.1 (308030101)
تحميل التسجيل
2024-02-23 02:09
حجم
60.57 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
■ Updates and Additions ・ Added various data of the Korean League. ・ Updated licenses. ・ Updated various in-game data. ・ The team structures of the following leagues have been updated with data from the new season. - Argentine League - Campeonato Betsson - Colombian League - MEIJI YASUDA J1 LEAGUE - MEIJI YASUDA J2 LEAGUE
Fixes for various other issues were also applied in this update. Check out the News section in-game for more information.
معلومات عامة
نص
8.3.0 (308030001)
تحميل التسجيل
2024-01-25 12:09
حجم
60.57 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
[Home] ■ Match (modes) ・ Added a new Dream Team game mode "My League".
■ Match (in-game) ・ In online matches, the number of times a user can perform an unskippable goal celebration has been limited to once per match.
■ My Team ・ Players' contracts can now be renewed using GP.
[Others] ・ Added various data of AFC Asian Cup-participating teams. ・ Fixes for various other issues were also applied in this update. *Check out the News section in-game for more information.
معلومات عامة
نص
8.2.0 (308020001)
تحميل التسجيل
2023-12-07 19:08
حجم
59.71 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・ Updated club data for the 2023-24 AFC Champions League season. ・ To prevent unintentional player releases, a tick box will now be displayed when attempting to release non-Standard players. ・ Added a functionality that will notify you of any Nominating Contracts that are about to expire. ・ Added Arabic to the list of selectable in-game languages. ・ Fixes for various other issues were also applied in this update. *Check out the News section in-game for more information.
معلومات عامة
نص
8.1.0 (308010001)
تحميل التسجيل
2023-10-05 12:25
حجم
59.27 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・ Updated team, player, and manager data for the '23–'24 season. ・ "Team Playstyle Level" and players' "Team Playstyle Proficiency" have been phased out. ・ "Base Team Settings" is now placed in Game Plan. ・ Base Teams can now be set for each Game Plan. ・ In-game asset and other data carryover process to be implemented. ・ Implemented various gameplay adjustments. ・ Fixes for various other issues were also applied in this update. *Check out the News section in-game for more information.
معلومات عامة
نص
8.0.0 (308000001)
تحميل التسجيل
2023-09-06 01:35
حجم
60.37 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・ Added "Co-op" to Friend Match in Dream Team. ・ Added a new feature in "Player Progression" to enable the reset of Progression Points. ・ Increased Dream Team Substitutes to 12 players. ・ Added "League" as an option to filter players. ・ Matches played in "Online Quick Match" and "Friend Match" modes will now count towards Match Pass progression. ・ Updated licenses. ・ Fixes for various other issues were also applied in this update. *Check out the News section in-game for more information.
معلومات عامة
نص
7.6.0 (307060001)
تحميل التسجيل
2023-06-09 02:08
حجم
59.12 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. *Check out the News section in-game for more information.
معلومات عامة
نص
7.5.1 (307050101)
تحميل التسجيل
2023-04-20 19:34
حجم
59.35 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・ Added new feature "Skill Training". ・ Added new feature "Legacy Transfer". ・ Player slots quota can now be expanded to a maximum of 900. ・ Players' Overall Rating will now exceed 100. ・ Added the option to change the team's "Attack/Defense Level" in-match. ・ Changed the in-match "Stats"/"Substitutions" displays. ・ Implemented various gameplay adjustments ・ Fixes for various other issues were also applied in this update. *Check out the News section in-game for more information.
معلومات عامة
نص
7.5.0 (307050001)
تحميل التسجيل
2023-04-13 12:12
حجم
59.35 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・ Added more selectable teams for Trial Match. ・ Updated Uniforms for MEIJI YASUDA J.LEAGUE clubs. ・ Fixes for various other issues were also applied in this update. *Check out the News section in-game for more information.
معلومات عامة
نص
7.4.2 (307040201)
تحميل التسجيل
2023-03-23 15:05
حجم
59.17 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. *Check out the News section in-game for more information.
معلومات عامة
نص
7.4.1 (307040101)
تحميل التسجيل
2023-02-24 12:22
حجم
59.16 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・ Added "Friend Match" for Authentic Team. ・ Updated selectable teams for Trial Match. ・ Added "Filter" function for Reserves in Game Plan. ・ Added new ways to sign players in Special Player List. ・ Fixed the flow of player signings. ・ Implemented various gameplay adjustments. ・ Updated licenses. ・ Updated face models. ・ Updated player and manager thumbnails. ・ Fixes for various other issues were also applied in this update. *Check out the News section in-game for more information.
معلومات عامة
نص
7.4.0 (307040001)
تحميل التسجيل
2023-02-16 12:12
حجم
59.15 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
POST_NOTIFICATIONS
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. *Check out the News section in-game for more information.
معلومات عامة
نص
7.3.2 (307030201)
تحميل التسجيل
2023-01-13 07:14
حجم
59.37 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・ Implemented adjustments to the matchmaking criteria of online matches. ・ Implemented various gameplay adjustments. ・ Updated licenses. ・ Updated face models. ・ Updated player thumbnails. ・ Updated commentary data. ・ Fixes for various other issues were also applied in this update. *Check out the News section in-game for more information.
معلومات عامة
نص
7.3.0 (307030001)
تحميل التسجيل
2022-12-26 07:12
حجم
59.37 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・ Added "Match Pass" ・ Added "VS AI Match" in Challenge Events ・ Added "Event Conditions" in Challenge Events ・ Added "Debut Missions" ・ Added new languages (Dutch, Greek, and Swedish) ・ In-game asset and other data carryover process to be implemented ・ Implemented various gameplay adjustments ・ Updated licenses ・ Updated face models ・ Updated player and manager thumbnails ・ Fixes for various other issues were also applied in this update *Check out the News section in-game for more information.
معلومات عامة
نص
7.2.0 (307020001)
تحميل التسجيل
2022-12-06 02:45
حجم
58.08 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. *Check out the News section in-game for more information.
معلومات عامة
نص
7.1.1 (307010101)
تحميل التسجيل
2022-11-01 16:17
حجم
57.03 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. *Check out the News section in-game for more information.
معلومات عامة
نص
7.0.2 (307000202)
تحميل التسجيل
2022-09-23 12:32
حجم
56.89 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. *Check out the News section in-game for more information.
معلومات عامة
نص
6.1.5 (306010501)
تحميل التسجيل
2022-07-31 15:13
حجم
56.61 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. *Check out the News section in-game for more information.
معلومات عامة
نص
6.1.3 (306010301)
تحميل التسجيل
2022-07-16 07:59
حجم
56.49 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. *Check out the News section in-game for more information.
معلومات عامة
نص
6.1.1 (306010101)
تحميل التسجيل
2022-06-16 21:30
حجم
56.5 MB
العربية
لا
متطلبات
الروبوت
7.0+
هندسة معمارية
ARM8
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
-Updated club team uniforms. -Updated face models. -New/updated player and manager portraits. -Updated commentary data. -Fixes for various other issues were also applied in this update. * Check out the News section in-game for more information.
معلومات عامة
نص
5.7.0 (305070001)
تحميل التسجيل
2022-02-14 08:08
حجم
95.53 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
BLUETOOTH_ADVERTISE
BLUETOOTH_CONNECT
BLUETOOTH_SCAN
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
-New season data for each league implemented, including promotions and relegations. -Updated player data. -Removed some club teams by reflecting the new license data. -Removed some leagues and competitions by reflecting the new license data. -Fixes for various other issues were also applied in this update. * Check out the News section in-game for more information.
معلومات عامة
نص
5.6.0 (305060001)
تحميل التسجيل
2021-12-20 20:21
حجم
96.18 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
-Added the option to select national teams as your Model Team. -Updated the player roster for some clubs playing in BRASILEIRÃO SÉRIE B 2021 (Brazil). -Updated club team emblems. -Updated face models. -Updated player portraits. -New manager portraits. -Updated cinematics and animations. -Updated commentary data. -Fixes for various other issues were also applied in this update.
معلومات عامة
نص
5.5.0 (305050001)
تحميل التسجيل
2021-07-01 13:59
حجم
96.09 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
-New/updated club team uniforms. -Updated national team uniforms. -Updated league emblems. -New/updated face models. -New/updated player portraits. -New manager portraits. -New/updated commentary data. -Fixes for various other issues were also applied in this update.
معلومات عامة
نص
5.4.0 (305040001)
تحميل التسجيل
2021-05-28 09:48
حجم
94.96 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
-New season data for BRASILEIRÃO ASSAÍ 2021 and BRASILEIRÃO SÉRIE B 2021 (Brazil) implemented. -New season data for Liga Profesional de Fútbol (Argentina) implemented. -New season data for Campeonato PlanVital (Chile) implemented. -J.LEAGUE player data updated -Data for some teams, players, and managers has been updated. -Fixes for various other issues were also applied in this update. * Check out the News section in-game for more information.
معلومات عامة
نص
5.3.0 (305030001)
تحميل التسجيل
2021-04-24 09:11
حجم
94.91 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
-Updated club team uniforms -Updated national team uniforms -New/updated face models -New/updated player portraits -New manager portraits -Updated player names -New/updated commentary data -The latest club promotion data for J.LEAGUE -Fixes for various other issues were also applied in this update.
معلومات عامة
نص
5.2.0 (305020001)
تحميل التسجيل
2021-02-06 09:09
حجم
95.11 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
-Updated club uniforms -Updated national team uniforms -Updated club emblems -New/updated face models -New/updated player portraits -New manager portraits -Updated player names -Fixes for various other issues were also applied in this update
معلومات عامة
نص
5.1.0 (305010001)
تحميل التسجيل
2020-12-04 15:01
حجم
95.08 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
-Sign talented star players through the "Player Pack", now available in the SHOP. -Fixes for various other issues were also applied in this update.
معلومات عامة
نص
5.0.1 (305000101)
تحميل التسجيل
2020-11-18 17:27
حجم
95.24 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・Updated team, player, and manager data from September 2020 ・Enhanced visuals ・New music ・A number of issues were fixed
معلومات عامة
نص
5.0.0 (305000001)
تحميل التسجيل
2020-10-16 12:04
حجم
95.24 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・New/updated face models ・New/updated player portraits ・New manager portraits Fixes for various other issues were also applied in this update.
معلومات عامة
نص
4.6.0 (304060001)
تحميل التسجيل
2020-06-25 13:22
حجم
94.6 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・Added the option to select national teams as your Model Team ・New season data for Campeonato AFP PlanVital (Chile) implemented ・J.LEAGUE player data updated ・Updated club team uniforms ・Updated national team uniforms ・Updated club team emblems ・New/updated face models ・New/updated player portraits ・New manager portraits ・Updated player names Fixes for various other issues were also applied in this update.
معلومات عامة
نص
4.5.0 (304050001)
تحميل التسجيل
2020-06-04 19:02
حجم
94.33 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・Updated club names ・Updated club uniforms ・Updated club emblems ・New/updated face models ・New/updated player portraits ・New manager portraits ・Updated player names Fixes for various other issues were also applied in this update.
معلومات عامة
نص
4.4.0 (304040001)
تحميل التسجيل
2020-04-11 20:48
حجم
94.27 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・Added the new "Iconic Moment Series" of players to the game. ・Added new Legends. (To be released in campaigns and other upcoming events.)
・A number of issues were fixed. * Check out the News section in-game for more information.
معلومات عامة
نص
4.3.0 (304030001)
تحميل التسجيل
2020-03-07 06:51
حجم
94.42 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
・7 purchasable squads added to the SHOP. ・"100 myClub Coins + RONALDINHO" item added to the SHOP. ・Changes made to make uniform selection easier and more intuitive. ・Updated data for several teams, players, and managers. ・Changed the default Condition Rating for Legend players to "B". ・Linking data now allows you to check your KONAMI ID account details in-game. * Check out the News section in-game for more information.
معلومات عامة
نص
4.2.0 (304020002)
تحميل التسجيل
2020-02-15 17:07
حجم
94.22 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
-New mode "Matchday" added. -"Dynamic Wide", "Stadium" and "Live Broadcast" camera types added. -Data for some teams, players and managers have been updated. -A number of issues were fixed. *Check out the News section in-game for further details.
معلومات عامة
نص
4.1.0 (304010001)
تحميل التسجيل
2019-12-22 15:42
حجم
74.63 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. * Check out the News section in-game for more information.
معلومات عامة
نص
4.0.1 (304000101)
تحميل التسجيل
2019-10-18 13:42
حجم
74.65 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
- Updated team, player, and manager data from September 2019 - New PES Partner Clubs from the top level of European soccer - Major gameplay improvements - New screenshot feature added to the Squad Management screen - Improved matchmaking functionality - Enhanced visuals - New music *Check out the News section in-game for more information.
معلومات عامة
نص
4.0.0 (304000001)
تحميل التسجيل
2019-10-16 07:08
حجم
74.65 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. * Check out the News section in-game for more information.
معلومات عامة
نص
3.3.1 (303030101)
تحميل التسجيل
2019-06-16 21:40
حجم
81.77 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
The face data for a number of players has been updated. A number of issues were fixed. * Check out the News section in-game for more information.
معلومات عامة
نص
3.3.0 (303030002)
تحميل التسجيل
2019-06-04 21:18
حجم
81.76 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM8 ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. * Check out the News section in-game for more information.
معلومات عامة
نص
3.2.1 (303020101)
تحميل التسجيل
2019-04-18 17:43
حجم
41.7 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM7 ARM6 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
-Data for some teams, players, and managers has been updated. -CFA Super League promotions and relegations have been updated. -J. LEAGUE uniforms have been updated to the 2019 season. *Uniforms for Japanese clubs in the ACL will not be updated. -A number of issues were fixed. *Check out the News section in-game for more information.
معلومات عامة
نص
3.2.0 (303020001)
تحميل التسجيل
2019-04-08 06:21
حجم
41.7 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM7 ARM6 x86
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. * Check out the News section in-game for more information.
معلومات عامة
نص
3.1.3 (303010301)
تحميل التسجيل
2019-03-08 14:36
حجم
41.4 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. * Check out the News section in-game for more information.
معلومات عامة
نص
3.1.2 (303010201)
تحميل التسجيل
2019-03-02 07:09
حجم
41.4 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
A number of issues were fixed. * Check out the News section in-game for more information.
معلومات عامة
نص
3.1.1 (303010101)
تحميل التسجيل
2019-02-12 05:40
حجم
41.47 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Data for some teams, players, and managers has been updated.
New Legend player data has been added.
The J.LEAGUE promotions and relegations have been updated.
TOYOTA Thai League promotions and relegations have been updated.
Several songs from the game's soundtrack have been removed.
The Privacy Notice has been updated. *The changes are only visible in some regions.
A number of issues were fixed. * Check out the News section in-game for more information.
معلومات عامة
نص
3.1.0 (303010001)
تحميل التسجيل
2019-02-08 16:18
حجم
41.47 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
-A number of issues were fixed. * Check out the News section in-game for more information.
معلومات عامة
نص
3.0.1 (303000101)
تحميل التسجيل
2019-01-10 16:25
حجم
40.34 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
License Updates ・Team, player, and manager data from the start of the 2018-2019 season implemented in-game ・Licenses of 12 new leagues added ・New legend players added
New Features ・Player signings via trades ・Various new items ・Live Updates ・Featured Players
More Engaging Matches ・Latest match engine from PES 2019 console implemented ・Momentous graphical improvements thanks to UNREAL ENGINE 4 ・In-Match HUD revamped
Presentation Improvements ・Enhanced visuals ・New music
معلومات عامة
نص
3.0.0 (303000002)
تحميل التسجيل
2018-12-13 10:54
حجم
40.34 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to change the state of network connectivity.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Allows the app to read the contents of your USB storage.
Allows the app to control the vibrator.
Allows the app to prevent the device from going to sleep.
-Both the app icon and the title screen have been updated. -A number of issues were fixed. * Check out the News section in-game for more information.
معلومات عامة
نص
2.3.3 (302030301)
تحميل التسجيل
2018-08-25 03:24
حجم
25.95 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
-A number of issues were fixed. * Check out the News section in-game for more information.
معلومات عامة
نص
2.3.1 (302030101)
تحميل التسجيل
2018-05-23 22:28
حجم
25.97 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
-Season 18C players now available. -New scouts available. -List of players obtainable from Standard Agents and Scouts updated. -Manager data updated. -Improved the layout of the [Contract] screen. -Improved the layout of the [Extras] screen. -A number of issues were fixed. *Check out the News section in-game for more information.
معلومات عامة
نص
2.3.0 (302030002)
تحميل التسجيل
2018-04-25 09:51
حجم
25.96 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
-Data for some teams, players, and managers will be updated.
-Stadium names will now be displayed during matches.
-The layout of Online Match Records will be reorganized.
-Manager's offensive and defensive tactics will now have an impact on each player's familiarity.
-Updates to various visual aspects of the game.
-A number of issues were fixed.
معلومات عامة
نص
2.2.0 (302020004)
تحميل التسجيل
2018-02-15 09:06
حجم
26.09 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
・The new "ONLINE MATCH CHALLENGES" event is now available
・New items added
Others
・Previously reported issues fixed
・Other issues fixed
معلومات عامة
نص
1.2.0 (301020002)
تحميل التسجيل
2017-08-21 16:59
حجم
26.68 MB
العربية
لا
متطلبات
الروبوت
5.0+
هندسة معمارية
ARM7
تحقق التطبيق
يتم إيداع الملف
إذن
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.
Allows the app to read the contents of your USB storage.
Allows the app to write to the USB storage.
Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.
Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to change the state of network connectivity.
Allows the app to control the vibrator.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to prevent the device from going to sleep.