4 (40)

وصف:

والفكرة هي تطبيق بسيط جدا - فإنه يمكن مسح الرمز الشريطي، والذي يتوفر على كل منتج تقريبا يمكنك شراء في متجر. ولكن ما هي النقطة مسحها ضوئيا؟ قد يتصور المرء عن ذلك في سريح رمز يحتوي على معلومات حول الشركة المصنعة والمعلومات التي يوليها المصنع للبضائع، وربما، ولكن في هذه الحالة - انها مختلفة! معلومات الشركة المصنعة تحصل بالتأكيد، ولكنها ليست مثيرة للاهتمام ولا معنى له. أهم شيء - يمكنك الحصول على تصنيف المنتجات، الباركود الممسوحة ضوئيا وكنت نقدية من قبل العملاء الحقيقي مثلك! الآن أنك لن تكون طويلة للاختيار بين عدة منتجات مماثلة بغفلة قراءة العلامات، وهو ما يكفي لمسح الرموز الشريطية بسهولة واختيار المنتج الذي هو أعلى تصنيف!
بشكل عام، سيكون لديك خياران فقط - مجرد مسح الباركود لمعلومات عن المنتج أو للتسجيل، وبالتالي تكون قادرا على ترك تعليقاتهم وتوليد تصنيفات المنتجات وقاعدة التطبيق! إذا كنت لا ترغب في تسجيل - لا تقلق، وبدون ذلك لا يزال بإمكانك الحصول على معلومات كاملة. عند هذه النقطة في تطبيق قاعدة بيانات تحتوي على أكثر من خمسة ملايين العناصر، ويزيد عددهم بانتظام والجمهور ينمو بوتيرة لا تصدق. تطبيق تلقى شعبية عالمية وبقوة المعلن عنها من قبل مختلف الناشرين، وليس لمطوري دائرة التنمية الغنية، ولأن التطبيق هو مفيد حقا، ومناسبة لجميع المستخدمين الروبوت! تحميل تطبيق قيم والسلع لالروبوت الخاص بك هنا أو ممكن في السوق، فإنه ليس مهما، والأكثر أهمية - واستخدامها لاتخاذ الخيارات الصحيحة في كل يوم!



التطبيق ميزات قيم والسلع:

إعلان

تحميل معدل والسلع 20230814.582

معلومات عامة
نص 20230814.582 (796)
تحميل التسجيل 2023-08-14 23:48
حجم 37.45 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

POST_NOTIFICATIONS

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

POST_NOTIFICATIONS

Allows the app to prevent the device from going to sleep.

معلومات عامة
نص 20230720.580 (794)
تحميل التسجيل 2023-07-21 07:48
حجم 37.45 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

POST_NOTIFICATIONS

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

POST_NOTIFICATIONS

Allows the app to prevent the device from going to sleep.

معلومات عامة
نص 20230719.579 (793)
تحميل التسجيل 2023-07-20 23:49
حجم 37.45 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

POST_NOTIFICATIONS

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

POST_NOTIFICATIONS

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We updated the design a little bit and fixed bugs
معلومات عامة
نص 20210630.577 (791)
تحميل التسجيل 2021-07-17 18:57
حجم 36.02 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Hi! We redesigned the comments section and fixed some issues.
معلومات عامة
نص 20210608.574 (788)
تحميل التسجيل 2021-06-10 18:33
حجم 36.05 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Yay! We've fixed a bunch of bugs and slightly enhanced app performance.
معلومات عامة
نص 20210427.572 (786)
تحميل التسجيل 2021-04-30 19:49
حجم 17.96 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Yay! We've fixed a bunch of bugs and slightly enhanced app performance.
معلومات عامة
نص 20210427.572 (786)
تحميل التسجيل 2021-04-30 19:50
حجم 17.96 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Another big update.
Now you can write reviews on stores, not just on products. You can praise the store or complain about it. And your review will be seen by representatives of this store and all users of the service
معلومات عامة
نص 20210330.569 (783)
تحميل التسجيل 2021-04-07 19:32
حجم 17.64 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Another big update.
Now you can write reviews on stores, not just on products. You can praise the store or complain about it. And your review will be seen by representatives of this store and all users of the service
معلومات عامة
نص 20210330.569 (783)
تحميل التسجيل 2021-04-07 19:32
حجم 17.64 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Minor bug fixing
معلومات عامة
نص 20210205.567 (781)
تحميل التسجيل 2021-02-17 19:54
حجم 17.61 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
We've added store cards. Soon it will be possible to rate them and ask your questions directly to the store representatives
معلومات عامة
نص 20210121.564 (778)
تحميل التسجيل 2021-01-25 16:36
حجم 17.61 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
The first step to launch a cashback inside the Rate & Goods app. Update, follow promotions, scan receipts and get cashback!
We wish everyone a Happy New Year!
This year was really difficult for all of us and we are glad that we were able to go through it with you.
During this year, we managed to implement many new functions, and we have even more plans for 2021. We really want to create a personal smart shopping assistant for you!
See you in the new year!
معلومات عامة
نص 20201230.563 (777)
تحميل التسجيل 2021-01-02 19:45
حجم 17.59 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
Big update - search for items in receipts. You can search and filter by store, amount, date of purchase, and, of course, by product name. Now, if you want to find your purchase, you will not need to remember when and where you made it — just enter the name of the product in the search (you can specify a partial name, for example, "choco") and the product will be found among all your receipts.
معلومات عامة
نص 20201217.561 (775)
تحميل التسجيل 2020-12-26 13:40
حجم 17.38 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
We have added the ability to send a file with your receipts to your mail (export of receipts in json format).
You can send either one check or specify a range. Important: expenses specified manually (without receipt) are also exported.
We also fixed a bug when, adding a receipt manually, it was impossible to put a "dot" when entering the amount.
معلومات عامة
نص 20201207.559 (773)
تحميل التسجيل 2020-12-09 15:47
حجم 17.32 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
We fixed some minor bugs in this update. But we are already preparing new features for you.
معلومات عامة
نص 20201201.558 (772)
تحميل التسجيل 2020-12-04 14:38
حجم 17.3 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
New notifications on the main screen to keep you up to date
معلومات عامة
نص 20201123.557 (771)
تحميل التسجيل 2020-11-28 20:30
حجم 17.3 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
What’s new:

— Add your spendings even without receipts! Include all of your actual spendings and purchases from the past for more accurate statistics.
— Now you can also zoom photos to and examine each pixel. Useful if someone has photographed the list of the product ingredients, or if you want to get a better look at the contents of the package.
Thanks for all of your ideas and feedback!
معلومات عامة
نص 20201001.555 (769)
تحميل التسجيل 2020-10-10 05:48
حجم 17.26 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
We added statistics to "Popular" section: now you can see how the prices of goods and the average receipt of Rate&Goods users change. This is just the beginning, soon we will show other data, but – no spoilers :)
معلومات عامة
نص 20200921.553 (767)
تحميل التسجيل 2020-09-29 06:41
حجم 17.24 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
We added statistics to "Popular" section: now you can see how the prices of goods and the average receipt of Rate&Goods users change. This is just the beginning, soon we will show other data, but – no spoilers :)
معلومات عامة
نص 20200918.552 (766)
تحميل التسجيل 2020-09-19 04:57
حجم 17.23 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
الجديد في هذا الإصدار
The sidebar turned into tab bar!
In Android 10 the swipe for calling the sidebar is the same as the "back" gesture. You swipe to bring up the menu, but end up leaving the app screen. No confusion when the menu is at the bottom. But for those who love the sidebar we left the opportunity to switch to it in the "Settings"!
معلومات عامة
نص 20200908.550 (764)
تحميل التسجيل 2020-09-11 12:27
حجم 36.46 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
The sidebar turned into tab bar!
In Android 10 the swipe for calling the sidebar is the same as the "back" gesture. You swipe to bring up the menu, but end up leaving the app screen. No confusion when the menu is at the bottom. But for those who love the sidebar we left the opportunity to switch to it in the "Settings"!
معلومات عامة
نص 20200817.548 (762)
تحميل التسجيل 2020-08-20 09:33
حجم 37.61 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Add receipts without authorization in the FTS!
We disconnected from the FTS and found new ways of downloading data on your receipts from other sources. Starting with the next updates, you no longer have to log in to your FTS account and share your data, it will remain only in your Rate&Goods profile!
معلومات عامة
نص 20200728.547 (761)
تحميل التسجيل 2020-08-05 16:51
حجم 41.55 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Hi everyone, it's a wrapped update!
QR-codes are back in the receipts. It’s a wrap!
Also we fixed a couple of bugs. It’s a wrap as well!
So, wrap the app! Oh, we mean update it, of course:)
معلومات عامة
نص 20200709.546 (760)
تحميل التسجيل 2020-07-12 18:54
حجم 41.53 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Find the promotional codes you need instantly!
We have divided hundreds of free offers from various services into the promotional codes section into thematic collections: "Products for children", "Beauty and Health" and many others. You can also see all the available offers from the service you are interested in.
Good choices at the best price!
معلومات عامة
نص 20200529.543 (757)
تحميل التسجيل 2020-06-02 17:35
حجم 41.12 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Scanned a barcode or found a product through the search? Add an item via your search history! Earlier products could only be added to a publication with the scanner or a photograph, now you have more options:)
معلومات عامة
نص 20200519.542 (756)
تحميل التسجيل 2020-05-19 16:34
حجم 45.43 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We updated our scanner! Because it can always work faster and more accurately. The world is changing, so we are — even if now it seems to us that life is kinda frozen. But it's already getting warmer!
معلومات عامة
نص 20200505.540 (754)
تحميل التسجيل 2020-05-12 07:19
حجم 45.42 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We updated our scanner! Because it can always work faster and more accurately. The world is changing, so we are — even if now it seems to us that life is kinda frozen. But it's already getting warmer!
معلومات عامة
نص 20200430.539 (753)
تحميل التسجيل 2020-05-01 22:38
حجم 45.42 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Our team is isolated, but continues to work! And here is the update: all changes are inside and affect what's outside. Sounds true to life, doesn't it? Okay, the moment of philosophy is over, now update the app :)
معلومات عامة
نص 20200403.538 (752)
تحميل التسجيل 2020-04-05 18:31
حجم 37.96 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We updated our design - the spring is here, you know, we needed to blossom a bit. We updated the screen of the history of viewed products: we added the tabs “viewed” and “rate”. So, view and rate, please :) And don't forget to take care!
معلومات عامة
نص 20200329.537 (751)
تحميل التسجيل 2020-03-29 21:01
حجم 37.96 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
All of us want to spend less time in the store, purchase everything asap and get back to self-isolation. So we made quick access to important functions: a long tap on the application icon and here you are — the scanner, discount cards and writing a post.
- Check prices and product reviews
- Use discount cards in the app - it's hygienic
- Share your experience with the community.

On your profile page, you can see how many people read your posts and reviews during a week and a month.
معلومات عامة
نص 20200320.535 (749)
تحميل التسجيل 2020-03-22 17:20
حجم 37.04 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Friends, we have completely established a connection with you! :) Our support service works now in full power, so write to us, we read all letters!

Also we take this opportunity to congratulate all the ladies on the holiday of spring <3 Keep on blossoming!
معلومات عامة
نص 20200311.534 (748)
تحميل التسجيل 2020-03-16 02:05
حجم 36.85 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
In this update, we pumped the displaying and sorting of prices — it should become prettier. Tell us later if it worked!
Also we fixed a couple of bugs. Because a couple sounds romantic. By the way, we’ve got a study about Valentine’s Day there, based on a survey that you, our users, passed. If you haven’t seen it yet, take a look at our stories, we have something to surprise you with :)
معلومات عامة
نص 20200218.532 (746)
تحميل التسجيل 2020-02-22 16:14
حجم 36.99 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Everyone will see your posts!
We continue to show the most complete information about products: now on the product card you can see not only reviews, but also posts where this product is mentioned. This means that your post will be seen not only by those who like to scroll the newsfeed, but also by those who like to scan products!
معلومات عامة
نص 20200123.530 (744)
تحميل التسجيل 2020-01-25 00:56
حجم 37.07 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Last update of the year. Gotta be :) Merry Christmas and Happy New Year, see you soon in the 2020th: we have big plans, and we will be happy to implement them for you!
معلومات عامة
نص 20191228.529 (743)
تحميل التسجيل 2020-01-01 15:33
حجم 37.16 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
This year we “socialized” Rate&Goods and the app got the Feed familiar to social networks. Now we strive to ensure that you see exactly the content that is useful to each of you, so we put the Popular tab in the first place. And your Feed is still here — find it in "Subscriptions" tab!
معلومات عامة
نص 20191220.528 (742)
تحميل التسجيل 2019-12-22 14:52
حجم 37.16 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to configure the local Bluetooth device, and to discover and pair with remote devices.

Allows the app to view the configuration of Bluetooth on the device, and to make and accept connections with paired devices.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Add more friends! Now you can invite them to Rate&Goods from Vkontakte, Facebook or your smartphone’s address book. Just send the link to download the app in any of these ways!

We also added the block “Popular Tags” to the section “Popular”: welcome to the thick of things in the life of the community!
معلومات عامة
نص 20191021.522 (736)
تحميل التسجيل 2019-10-25 06:33
حجم 36.37 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Add more friends! Now you can invite them to Rate&Goods from Vkontakte, Facebook or your smartphone’s address book. Just send the link to download the app in any of these ways!

We also added the block “Popular Tags” to the section “Popular”: welcome to the thick of things in the life of the community!
معلومات عامة
نص 20191018.521 (735)
تحميل التسجيل 2019-10-19 09:47
حجم 36.37 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Hey, we did it! Now the app loading takes a few seconds — you no longer have to look sadly at the white screen for a long time. Update now!
معلومات عامة
نص 20190925.520 (734)
تحميل التسجيل 2019-09-30 06:21
حجم 36.25 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Meet updated receipts! Before: all receipts without itemization of purchases had the status “No data in the FTS”. After: we have put everything on its place and separate receipts “on verification” from incorrect receipts.

We also improved the search engine! Before: endless scrolling. After: you can indicate what you want to search among products, users, tags, etc., simply by tapping on the desired section under the search bar.

Is “after” better than “before”? Feedback, please!
معلومات عامة
نص 20190913.519 (733)
تحميل التسجيل 2019-09-22 05:31
حجم 36.25 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the device, potentially including personal or private information.

Allows the app to move tasks to the foreground and background. The app may do this without your input.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Ronins of code
Cleared all the bugs
Summer is over

You read IT haiku about this update and you know what to do next. Banzai!
معلومات عامة
نص 20190805.512 (726)
تحميل التسجيل 2019-08-09 17:43
حجم 28.35 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
If you scroll the feed and see a post that offends your feelings or seems inappropriate, you can complain about it. All complaints are checked and, if necessary, we'll take measures.
How to express yourself in 200 characters? It’s hard ... if you want to talk about your stores, your experience or just brag about your funny videos. Now you can add a link leading to any third-party site to the Profile screen and it will be seen by everyone who goes to your profile.
معلومات عامة
نص 20190619.509 (723)
تحميل التسجيل 2019-06-23 18:55
حجم 25.86 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Made a cool post and constantly check likes and comments? Forget about it: now we deliver “hearts” and kind (most likely) words from other users with notifications! You no longer need to constantly update the app, cos you’ll always be aware that your post has been liked or commented. Just update the app!
معلومات عامة
نص 20190528.508 (722)
تحميل التسجيل 2019-06-04 21:48
حجم 25.83 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Made a cool post and constantly check likes and comments? Forget about it: now we deliver “hearts” and kind (most likely) words from other users with notifications! You no longer need to constantly update the app, cos you’ll always be aware that your post has been liked or commented. Just update the app!
معلومات عامة
نص 20190524.507 (721)
تحميل التسجيل 2019-05-28 04:48
حجم 25.72 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Big update!
Now you can communicate with each other within the app, share reviews and publications, read articles, save useful materials and communicate directly with manufacturers.
Also, all the functionality of the service is available for you: scan barcodes, add receipts and discount cards, as well as receive discounts from our partners.
Looking forward to your feedback!
معلومات عامة
نص 20190507.505 (719)
تحميل التسجيل 2019-05-15 19:30
حجم 25.7 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We have improved the functionality of the scanner: now it recognizes barcodes and receipts’ QR-codes in the photos. By that, we mean that if someone sends you the photo of a receipts or a barcode, you can download and identify it on the scanner screen. Also, if your receipt can't be scanned for some reason, you can add it manually on the screen with the list of your receipts.

Time to upgrade!
معلومات عامة
نص 20190418.433 (647)
تحميل التسجيل 2019-04-18 18:06
حجم 25.26 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We refined the receipts feature: from now you can see the QR-code on the receipt screen – and it looks as if it is all real. Also your purchases are categorized: you will see how much you spend for meat, dairy and any other products monthly. Thank you for your letters and your feedback!
معلومات عامة
نص 20190403.431 (645)
تحميل التسجيل 2019-04-08 06:58
حجم 25.11 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We updated the settings screen of the new (and cute!) user profile and fixed a couple of bugs. Also added some spring mood — but you can only feel that :)
معلومات عامة
نص 20190305.429 (643)
تحميل التسجيل 2019-03-08 15:06
حجم 25.01 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We have updated the design of your profiles! They received advanced functionality: now you can add your contact details to get to know your friends at Rate&Goods and hang out at social networks or messengers.
To other news: recently our scanner behavied in a really nasty way, but we fixed that. Update now!
معلومات عامة
نص 20190220.428 (642)
تحميل التسجيل 2019-02-22 04:05
حجم 24.93 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We can’t wait to tell you about the forthcoming update, but for now we’ve redesigned the app’s side menu and the tab for adding prices. Which is also good, because these parts look nice and comfortable. Also we fixed the error causing inability to launch the app under Android 5.0 and Android 5.1.
Stay tuned — hot news is on the way!
معلومات عامة
نص 20190204.426 (640)
تحميل التسجيل 2019-02-08 16:43
حجم 22.85 MB
العربية لا
متطلبات
الروبوت 5.0+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We fixed a couple of unpleasant bugs: update the app so that everything is completely pleasant. Also we summed up the year on the activity of our community. Guys, we are incredibly grateful for your support! We look forward to what 2019 will be :) Stay tuned!
معلومات عامة
نص 20190117.424 (638)
تحميل التسجيل 2019-01-17 20:22
حجم 23.12 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We hope that you guys had drop-dead holidays. Just like us :D Fixed holiday bugs which made the app kept “dropping dead”. Just too much of celebration, now everything is working as usual :)
معلومات عامة
نص 20190111.423 (637)
تحميل التسجيل 2019-01-13 09:46
حجم 23.35 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We fixed the last bugs of this year and now heading for the champagne. Wishing the same to you. Happy New Year, dear friends! Thank you for supporting us in 2018, our plans for 2019 are outstanding — so stay tuned!
معلومات عامة
نص 20181228.422 (636)
تحميل التسجيل 2019-01-01 16:10
حجم 23.35 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We fixed the last bugs of this year and now heading for the champagne. Wishing the same to you. Happy New Year, dear friends! Thank you for supporting us in 2018, our plans for 2019 are outstanding — so stay tuned!
معلومات عامة
نص 20181227.421 (635)
تحميل التسجيل 2018-12-27 19:00
حجم 23.35 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Have you heard of our New Year's giveaway? If not, update your version of the app (bugs free now!) and participate in the race for cool prizes!
معلومات عامة
نص 20181219.419 (633)
تحميل التسجيل 2018-12-21 20:33
حجم 21.7 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We think you’ve noticed that we had released our product card with a brand new design. But both Android 5 and 7 decided not to show product’s photo and name. We fixed it in this release.
معلومات عامة
نص 20181207.417 (631)
تحميل التسجيل 2018-12-13 11:24
حجم 21.61 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We think you’ve noticed that we had released our product card with a brand new design. But both Android 5 and 7 decided not to show product’s photo and name. We fixed it in this release.
معلومات عامة
نص 20181203.411 (625)
تحميل التسجيل 2018-12-09 11:42
حجم 21.61 MB
العربية لا
متطلبات
الروبوت 4.1+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

FOREGROUND_SERVICE

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Hi! We have released an update, but we will not show it to you. LOL just kidding :) Some changes are like an electromagnetic field: you don’t see them, but they exist and work. Discarding the lyrics, the app just works better now — and we continue to prepare it for our upcoming big updates. Stay tuned!
معلومات عامة
نص 20181015.408 (622)
تحميل التسجيل 2018-10-16 04:23
حجم 21.49 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Our latest updates were cool like Bruce Willis. We took a short break to simply correct the bugs as we did that in the good old days. But we are restless, so we are already preparing something cool. Thank you for your feedback — we hear our users! Stay tuned :)
معلومات عامة
نص 20181005.403 (617)
تحميل التسجيل 2018-10-11 19:21
حجم 21.49 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Get your cashback directly from the manufacturers in Rate&Goods!
We have implemented the technology and now we test it with Profits. You can get cashback in Profits from the producers of cheese and honey. To do this, scan the check: when buying some products, you will see an icon opposite the promotional position. If the item from the check is not matched with the goods in our catalog, you will see the icon "cashback is possible". To get it, link the item from the receipt with the product.
معلومات عامة
نص 20180920.402 (616)
تحميل التسجيل 2018-09-22 22:04
حجم 32.08 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Rate&Go: scan barcodes and compare the goods right in the store!
We have redesigned the scanner screen: in the new Rate&Go mode you can quickly compare products without leaving the scanner screen, and go to the full product information from the pop-up card. All products scanned in Rate&Go mode will be stored in the search history.

Try it — we want your feedback!:)
معلومات عامة
نص 20180822.399 (613)
تحميل التسجيل 2018-08-25 03:55
حجم 31.52 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Previous update was devoted to the scanner of QR-code on your receipts.
This one is about opportunity to store discount cards in Rate&Goods!
They will no longer clog your wallet, and you don’t have to go through all the cards when you are at the cashier desk. You don’t even need thousands of the apps anymore — because you have us, and we provide you with everything! Well, almost :)
Add and store discount cards: through the search you’ll always find the right one.

Waiting for your feedback!
معلومات عامة
نص 20180808.398 (612)
تحميل التسجيل 2018-08-10 16:44
حجم 31.39 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Hi everyone! Thank you for your feedback on the new feature of scanning QR-codes in checks! Many of you immediately began to test it, and, apparently, scanned all the checks at hand :) That can prevent you from making an objective picture of your expenses. Therefore, in this update we have completed the feature: now you can delete the checks!

From other news: if someone transfers Profits to you, you will immediately find out about it in the notification center on the main page.

Stay tuned!
معلومات عامة
نص 20180718.396 (610)
تحميل التسجيل 2018-07-24 17:00
حجم 30.74 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Scan QR-codes in the checks with Rate&Goods!
Save and keep the checks of your purchases in the app: they won’t tear off, be lost or fade, cheers to the digital present.
All checks will be in your profile:
—Keep an eye on your expenditure,
—Find out "where is my money I got my salary just yesterday”,
—And notice if the seller sold you the stock item for its full price.
When you tap on check you can see its details.
Just press one button to use this feature!
معلومات عامة
نص 20180706.395 (609)
تحميل التسجيل 2018-07-15 19:18
حجم 30.71 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
We upgraded our search engine! Now you can use new filters and sorting function to find the product you are looking for. At your disposal:

—Filtering goods by country of origin, rating, price and availability of reviews;
—Fast filters: the search shows only the products with reviews and / or ratings starting with three stars;
—Sorting products by rating in the app and the average price.

All this, of course, saves you a lot of your time. Customize the search and get exactly what you want!
معلومات عامة
نص 20180618.393 (607)
تحميل التسجيل 2018-06-21 13:22
حجم 29.93 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Previously on Rate&Goods: we added a card of the manufacturer. Now the company can create an official account in the app, assign its representative and communicate with the users. In this episode — we mean, the release — we've added a tab on the manufacturer's card with all the feedbacks. If the manufacturer's representative leaves a comment, it is highlighted and appears immediately under the feedback.
To be continued!
معلومات عامة
نص 20180518.389 (603)
تحميل التسجيل 2018-05-23 21:38
حجم 29.2 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Back to work after the weekend — and we are ready to greet you with the updates! Meet the manufacturer's card: now you can find out who released the product, see the full list of the goods from the manufacturer and even contact the company’s representative!

We build the bridges between consumers and goods!

Also fixed some may bugs. Well, you got it;)

Looking forward to your feedbacks!
معلومات عامة
نص 20180510.388 (602)
تحميل التسجيل 2018-05-11 23:27
حجم 29.15 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Meet the new product card!
—We redesigned the information blocks about the product;
—Added a color indicator: the card’s colour depends on the rating of the good. Red — users didn’t like the product, orange — so-so, and you can take it if it’s green;
—Now there’s a list of ingredients of the product! We’ve uploaded contents of several thousand of goods and still fulfilling the base.
We also updated the screens of gallery and prices, and fixed several bugs.
Tell us what you think of the updates!
معلومات عامة
نص 20180423.387 (601)
تحميل التسجيل 2018-04-25 07:11
حجم 27.56 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Вот так заходишь в некоторые приложения — и проваливаешься в кроличью нору: открываешь один экран, а попадаешь на другой. На пути к цели встречаешь миллион препятствий. Логика приложения вам кажется безумной, а разработчики — невменяемыми.

К счастью, у нас здесь своя Страна Чудес — с алкокотом и поп-апами. И если у вас нет аккаунта в системе, или вы в него не вошли, после авторизации вы приземлитесь чётко туда, куда и намеревались.

Не бегите за кроликом — следуйте за поп-апом!
معلومات عامة
نص 20180402.385 (599)
تحميل التسجيل 2018-04-13 05:59
حجم 26.82 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Yeah, it’s spring!
We fixed some bugs, brought back our main page on its place as it tried to escape — the code went crazy. It’s freezing and snowing outside — but here we have March, brand new rewards and cats. Yes, new rewards — 10 levels in each series!
Update the app for your spring atmosphere and catch them all!
معلومات عامة
نص 20180316.381 (595)
تحميل التسجيل 2018-03-17 23:37
حجم 26.51 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Yeah, it’s spring!
We fixed some bugs, brought back our main page on its place as it tried to escape — the code went crazy. It’s freezing and snowing outside — but here we have March, brand new rewards and cats. Yes, new rewards — 10 levels in each series!
Update the app for your spring atmosphere and catch them all!
معلومات عامة
نص 20180306.379 (593)
تحميل التسجيل 2018-03-06 16:02
حجم 26.36 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Today we brought you kitties!
Now you will see kitties every time the app appeals to you. Because it’s kinda live and likes to communicate. And kitties.
To other news: our developers did something (again), and now the search engine shows you the top of most closest results to what the user meant. From now the app understands you better. Because it’s kinda live and likes to communicate:)
معلومات عامة
نص 20180222.377 (591)
تحميل التسجيل 2018-02-23 16:53
حجم 26.08 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Hey! So, what do we have here:
—New designs of two screens — settings and profile editing!
—Our programmers have programmed something and poof — now the goods in the history and search are being loaded really fast!
معلومات عامة
نص 20180131.376 (590)
تحميل التسجيل 2018-02-04 13:30
حجم 26.06 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Meet the first update of 2018:
—Remember those all new and sexy rewards we presented you last December? When you receive one of them, you get a push-notification, and the "bell" icon on the main page of the app lights up;
—If you scanned the barcodes without signing up, you still have your rewards. Sign up to see them:3
—Now there is a list of what you can complain about: it opens by a tap on the button "Complaint" on the product card;
Stay tuned!
معلومات عامة
نص 20180122.375 (589)
تحميل التسجيل 2018-01-30 18:21
حجم 26.02 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Fixed crashes in scanner activity.
Epic return of the rewards!
You’ve been waiting for them (thank you for your letters!), and we’ve been drawing them hard to put them under your xmas tree.
Meet our new, bright and multilevel rewards! Every reward contains several levels of achievements. When you upgrade your skill, you get a new reward.
We wish you a lot of achievements and rewards this year!
معلومات عامة
نص 20171228.373 (587)
تحميل التسجيل 2018-01-01 10:57
حجم 25.98 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Fixed crashes in scanner activity.
Epic return of the rewards!
You’ve been waiting for them (thank you for your letters!), and we’ve been drawing them hard to put them under your xmas tree.
Meet our new, bright and multilevel rewards! Every reward contains several levels of achievements. When you upgrade your skill, you get a new reward.
We wish you a lot of achievements and rewards this year!
معلومات عامة
نص 20171226.369 (583)
تحميل التسجيل 2017-12-28 08:40
حجم 25.98 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Hotfix: fixed app crashes.
Now your friends can instantly know that you use Rate&Goods: you can share any user's profile through anything you use — messengers, social networks, even through the QR code scanner! Your friends will receive a link that leads to the profile. If some of them don't use Rate&Goods, then they will first go to the store. After the app is installed, it immediately opens the profile through the link you sent before.
Like and share each other!
معلومات عامة
نص 20171214.368 (582)
تحميل التسجيل 2017-12-15 10:38
حجم 25.08 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Hey everyone! We’re very excited to present you the totally new main screen: now you can find there news, reviews and – what is most important – the catalog with products divided into categories! Also you can search for both goods and categories.
And now we can show you the average price of the goods: it is especially convenient if you buy something for the first time.
Enjoy!
معلومات عامة
نص 20171127.364 (578)
تحميل التسجيل 2017-12-02 15:09
حجم 24.43 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Dear friends, now you'll get more Profits – thanks to advertising! Each view brings 1 Profit to your profitbox, and one day you will break it and buy something cool at a bargain price. Look for banners marked "Advertising Post" in your news feed, tap on it and get Profits.
Advertising benefits when the customers benefit from it!
We also fixed a couple of bugs – the comment counter on the product card and the stars in the reviews got off, but now everything works like a clock.
Check it!
معلومات عامة
نص 20171107.360 (574)
تحميل التسجيل 2017-11-08 16:08
حجم 22.99 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Hey! Heard about the goods news?
—The app easily "breaks up" with G + (doesn’t "have a crush on it") — if you untie your account;
—We have overcome the language barrier: now the app doesn’t crash if the language of your smartphone is not Russian or English;
—Also we’ve fixed the app's work offline: when you add currency or open scanned goods without internet — it doesn’t crush.
Well, it works!
معلومات عامة
نص 20170928.356 (570)
تحميل التسجيل 2017-09-29 05:28
حجم 15.39 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Hey! Just look what we have here:
—There’s a block of quick access buttons now in the product card;
—The app supports Smart Lock;
—We replaced the button "Invite friends" from someone else's profile. What did it do there? We don’t know. But now it’s OK!
—Attention, Android 8.0: the app doesn’t crash, the coming pushes are displayed!
—When the product was scanned from another user’s list, the app tried to add this product to this foreign list. What for? We don’t know. But now it’s OK!
معلومات عامة
نص 20170920.354 (568)
تحميل التسجيل 2017-09-24 10:41
حجم 15.39 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Hey! This release is full of beauty and improved usability. See:
—Autosharing works fine;
—As well as the app itself;
—To invite friends into the app, you don’t need to get up — in a sense that you don’t need to leave your profile page;
—The blocks of the prices now look organic and generally pleasant.
So, it's time for the updates:)
معلومات عامة
نص 20170905.352 (566)
تحميل التسجيل 2017-09-07 21:00
حجم 15.86 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the sync settings for an account. For example, this can determine whether the People app is synced with an account.

Allows an app to modify the sync settings for an account. For example, this can be used to enable sync of the People app with an account.

Allows the app to use the account authenticator capabilities of the AccountManager, including creating accounts and getting and setting their passwords.

READ_APP_BADGE

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Dear friends!
That's our list of updates:
- Now, you can add new shops;
- Added search by shops;
- Added more information about products in product card;
- You can add international telephone numbers.
Update and check it!
معلومات عامة
نص 20170828.351 (565)
تحميل التسجيل 2017-08-30 11:49
حجم 11.59 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Dear friends!
That's our list of updates:
- Now, you can add new shops;
- Added search by shops;
- Added more information about products in product card;
- You can add international telephone numbers.
Update and check it!
معلومات عامة
نص 20170822.350 (564)
تحميل التسجيل 2017-08-23 07:46
حجم 15.97 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Perhaps when you don’t see some obvious changes in the release you start suspecting something:) So we hasten to assure you: our developers work like bees (and not like drones!), so that our app is getting closer to perfection:3
معلومات عامة
نص 20170727.347 (561)
تحميل التسجيل 2017-07-28 20:57
حجم 20.7 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
We just wanted to say that we’re OK — and at the same time remind you about beta testing :) Sign up here: support@ratengoods.com. All tester will recieve our gratitude and Profits!
معلومات عامة
نص 20170705.344 (558)
تحميل التسجيل 2017-07-06 21:27
حجم 20.51 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
You wrote a lot that the new camera was jamming and giving out too conceptual pictures. We added brightness and sharpness — so we made pictures great again.
Also we corrected a couple of details, so that the design of the card with a feedback became more harmonious. Zen and usability!
معلومات عامة
نص 2017613.341 (556)
تحميل التسجيل 2017-06-10 07:33
حجم 20.51 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Photos on the all screens are being added stably;
When you add a price to the product, the virtual keyboard appears with the currency selection button;
You can swipe the reviews on the product card smoothly like it’s Tinder;)
The news feed has its new design. Check it!
We changed the heading "Feedback" on the product review screen on the product’s name;
And now you can share entire lists.
معلومات عامة
نص 20170523.340 (554)
تحميل التسجيل 2017-05-31 05:16
حجم 15.99 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
When you go from the item characteristics screen back to its card, nothing bad happens :)
معلومات عامة
نص 20170404.331 (545)
تحميل التسجيل 2017-04-07 06:26
حجم 15.75 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Dear friends! Meet the updates:
-If you had added prices of the goods, and then a little later you wanted to add more prices, in the "Store" field you’d have seen the store you picked the previous time you added a price;
-We added history of the stores where you added prices. You can delete a store from the history by a click with hold on its name;
-When you run the app without the Internet, you don’t need to log in again;
-If you turned off the notifications, you will not receive them anymore:)
معلومات عامة
نص 20170404.330 (544)
تحميل التسجيل 2017-04-05 10:17
حجم 20.4 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Hey guys! What’s new:
-Widget for scanner: run the scanner with one button! After scanning you stay in the application without re-opening it
-You can open links from Google leading to our product pages in the app! After clicking on the link. choose Rate&Goods in the "Open" menu
-The sharing of awards is updated: when you share your rewards with others, they can go straight to the store to download the app
-When you try to send feedback without internet connection, you’ll receive a notification
معلومات عامة
نص 20170321.329 (543)
تحميل التسجيل 2017-03-22 07:24
حجم 11.79 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Now it's even easier to hang out with friends in Rate&Goods! What’s new:
-You can invite friends from social networks;
-See who of your friends in the social networks uses Rate&Goods;
-We’ve added a new role for our users — Commentators: these are users who actively participate in discussions;
-We’ve visually changed the block with reference to the note about the good in the item card.
Call friends, talk, leave feedbacks!
معلومات عامة
نص 20170307.326 (540)
تحميل التسجيل 2017-03-10 10:08
حجم 11.23 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read data about your contacts stored on your device, including the frequency with which you've called, emailed, or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
So, what's new: The layout on phones with small displays is fixed; Offline access to certain functions of the application (scanner; updates of your browsing history and data when connecting to the Internet; viewing of the profile and history; settings; images); The bugs in the galleries are fixed; Added the indicator for the updates in the news feed; Rating of the items is displayed correctly on all screens of the reviews. Update & try it!
معلومات عامة
نص 20170221.325 (539)
تحميل التسجيل 2017-03-01 07:06
حجم 10.84 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

READ_APP_BADGE

الجديد في هذا الإصدار
Dear friends! In this release we worked on different details:
If you add the price of the goods in the store, and you have already added the price there on that day, you’ll be notified
The notifications that your friend from Vk also uses Rate&Goods are shown correctly on the news feed
The deleted reviews are no longer shown in your reviews
You see the correct assess in your browsing history
In the drop-down menu we added a "profile" string with round avatar of a user
Thank you for your feedback!
معلومات عامة
نص 20170124.322 (536)
تحميل التسجيل 2017-02-01 07:07
حجم 11.61 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Hello! What’s new on the app:
If the application doesn’t have access to your location, it wouldn’t ask you to turn it on;
You can’t select a date later than today while adding the price;
When you are leaving the contests’ page the profits are displayed;
Currency selection button appears above the keyboard when you click on the "price" and disappears when the keyboard is hidden.
The New year in on the way!
معلومات عامة
نص 20161213.318 (532)
تحميل التسجيل 2016-12-25 07:11
حجم 11.7 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We've got good news for you:
- Completely new user profile with all reviews and Profits balance.
- Updated history screen.
- And finally, now you can turn off the annoying geolocation prompt!
معلومات عامة
نص 20161213.316 (530)
تحميل التسجيل 2016-12-16 08:05
حجم 11.7 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
In this release we've just fixed a couple of things. But once you are here, you can try and solve one of our favorite riddles:
There are 50 discs on the table. Each disc is white on one side, the other's black. 10 discs are white side up, the others - black. It is necessary to divide disks into two groups so that each had the same number of discs lying white side up. And yes: it's a logic tusk and the answer is simple!
Send your letters to support@ratengoods.com marked "I know the answer!"
معلومات عامة
نص 20161129.315 (529)
تحميل التسجيل 2016-12-07 07:23
حجم 12.2 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Dear friends!
Every release we try to surprise you. This time we led the scanner screen to the overall view with the rest elements of the application's design, so now everything is in harmony.
And we removed the popup window that prompts you to enter the bar code manually and (and unnerved everybody).
P.s. And remember - the New Year is coming. That means it's time to think about buying gifts!
معلومات عامة
نص 20161115.310 (524)
تحميل التسجيل 2016-11-16 10:20
حجم 12.89 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
We’ve created Rate&Goods so that you could find out about any product. So now you can not only watch ratings and read reviews left by our users, but also see the results of laboratory tests on goods by Roskachestvo and Roskontrol! Look for the mark of Roskachestvo and Roskontrol on the item card and make sure the product is safe for your health.
Also in our catalog you can find kosher products (edible for Jews). If you want to buy a kosher product, make sure the item card has a special mark!
معلومات عامة
نص 20161101.309 (523)
تحميل التسجيل 2016-11-04 07:55
حجم 12.89 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Dear friends,
Recently we have fixed a few bugs so now the app continues to run when geolocation is enabled.
Thank you for your feedback, we appreciate it much!
معلومات عامة
نص 20161024.308 (522)
تحميل التسجيل 2016-10-28 07:44
حجم 12.8 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Dear friends! It's time to update your Rate & Goods — and here's why:
-The product card has a button which helps you to add the item to your list
- Push-notifications no longer cause failures in the application no more
- Block with reviews on the item card now looks even cooler
- And also we fixed a few detailsAs always, we are looking forward to your feedback (on the goods as well as on the app)
معلومات عامة
نص 20161018.307 (521)
تحميل التسجيل 2016-10-22 06:43
حجم 12.81 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Dear friends!This week our fabulous team have worked diligently to release this update. But without your help we would not have achieved it!So, what’s new:Now the scanner works as it should;The sidebar on the left of the item card is back in its place (on the left);Comments are displayed correctly;The application now sends you only one unique notification, without repetition.Thank you for reporting about bugs! Stay in touch
معلومات عامة
نص 20161012.306 (520)
تحميل التسجيل 2016-10-16 06:31
حجم 11.54 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
This update you've been waiting with impatience! Meet new Rate & Goods newsfeed - now it's almost on the all smartphones of the world (except windowsphones - sorry, guys, that's not because we don't like you).
Now you do not miss the most interesting reviews and articles on the most necessary and unnecessary goods! Write your own detailed reviews, and all the users of our useful applications will see them.
And yes, we've made in white, because white is the new black.
Have a good shopping time!
معلومات عامة
نص 20161003.305 (519)
تحميل التسجيل 2016-10-07 06:49
حجم 12.79 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
This update you've been waiting with impatience! Meet new Rate & Goods newsfeed - now it's almost on the all smartphones of the world (except windowsphones - sorry, guys, that's not because we don't like you).
Now you do not miss the most interesting reviews and articles on the most necessary and unnecessary goods! Write your own detailed reviews, and all the users of our useful applications will see them.
And yes, we've made in white, because white is the new black.
Have a good shopping time!
معلومات عامة
نص 20160927.303 (517)
تحميل التسجيل 2016-10-01 06:49
حجم 12.79 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Dear friends!
We have noticed that you really loved our competitions and quizzes — so we tried our best to improve them!
Soon you will feel the difference, stay tuned
معلومات عامة
نص 20160915.302 (516)
تحميل التسجيل 2016-09-16 06:59
حجم 17.97 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Good news for all the owners of Android-based smartphones: now the app does not crash when you try to add the price! Thank you for your comments, because of your quick feedback we fixed this bug in the shortest time. Add prices and enjoy the result :)
معلومات عامة
نص 20160830.301 (515)
تحميل التسجيل 2016-09-07 06:41
حجم 17.97 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Dear users!
Two weeks ago we presented a large release: it was not flawless , but it contained a lot of upgrades including a new product card. In this release we have eliminated a significant amount of bugs and added the ability to call the burger-menu with new screens (product card, the list of user reviews, price list, etc.).
Thank you for staying with us!
Stay tuned!
معلومات عامة
نص 20160830.300 (514)
تحميل التسجيل 2016-09-04 07:30
حجم 17.97 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to read the contents of your USB storage.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

الجديد في هذا الإصدار
Dear users!
This release is still not that perfect, but it brings us much closer to a perfect application we are working on for you! We are glad to notify you than we have fixed a few bothersome bugs and brought back some lost things you liked.
Thank you for staying in touch with us and telling us about all the shortcomings and drawbacks inside the application. Your help is invaluable!
معلومات عامة
نص 20160811.298 (512)
تحميل التسجيل 2016-08-13 06:26
حجم 17.97 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Dear users, we apologize as there were some technical defects in our latest updates. We wanted to release the updates in the shortest time, but it turned out there was a bug we didn't notice. We fixed it in the shortest time. Thank you for your understanding!
معلومات عامة
نص 20160805.297 (511)
تحميل التسجيل 2016-08-07 06:11
حجم 17.97 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Thank you for feedbacks!
Our app became more fast and stable!
What’s improved:
• Fixed bugs
• Improved stability
معلومات عامة
نص 20160514.295 (509)
تحميل التسجيل 2016-07-16 19:57
حجم 18.76 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86_64 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

الجديد في هذا الإصدار
Thank you for feedbacks!
Our app became more fast and stable!
What’s improved:
• Fixed bugs
• Improved stability
معلومات عامة
نص 20160507.294 (508)
تحميل التسجيل 2016-07-13 18:50
حجم 17.46 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 20160629.293 (507)
تحميل التسجيل 2016-07-06 10:34
حجم 17.16 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 20160524.292 (506)
تحميل التسجيل 2016-06-02 05:31
حجم 16.81 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 20160428.291 (505)
تحميل التسجيل 2016-05-17 05:52
حجم 16.67 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 20160420.287 (501)
تحميل التسجيل 2016-04-23 04:55
حجم 16.64 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 20160331.286 (500)
تحميل التسجيل 2016-04-07 05:28
حجم 16.33 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 20160309.283 (497)
تحميل التسجيل 2016-03-22 06:06
حجم 16.33 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 20160301.282 (496)
تحميل التسجيل 2016-03-06 06:00
حجم 16.33 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.2.281 (495)
تحميل التسجيل 2016-02-19 05:48
حجم 16.35 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.2.279 (493)
تحميل التسجيل 2016-02-11 06:12
حجم 16.35 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية ARM8 ARM7 ARM6 x86 mips
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.2.262 (476)
تحميل التسجيل 2015-12-25 06:39
حجم 17.07 MB
العربية لا
متطلبات
الروبوت 4.0.3+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.2.244 (458)
تحميل التسجيل 2015-12-17 06:44
حجم 16.97 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.2.243 (457)
تحميل التسجيل 2015-12-09 07:12
حجم 16.97 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.2.224 (438)
تحميل التسجيل 2015-12-01 06:05
حجم 13.59 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.2.223 (437)
تحميل التسجيل 2015-11-15 05:34
حجم 13.6 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.2.222 (436)
تحميل التسجيل 2015-11-07 06:18
حجم 13.12 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.2.201 (415)
تحميل التسجيل 2015-10-14 04:07
حجم 12.41 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.1.141 (355)
تحميل التسجيل 2015-08-07 22:50
حجم 9.29 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.1.137 (351)
تحميل التسجيل 2015-06-16 13:29
حجم 8.65 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.1.136 (350)
تحميل التسجيل 2015-06-03 18:59
حجم 8.56 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.1.135 (349)
تحميل التسجيل 2015-05-12 05:42
حجم 8.51 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.1.132 (346)
تحميل التسجيل 2015-04-28 05:32
حجم 8.5 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to prevent the device from going to sleep.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.1.125 (339)
تحميل التسجيل 2015-04-14 05:11
حجم 8.23 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 3.1.120 (334)
تحميل التسجيل 2015-03-31 04:53
حجم 8.42 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to request authentication tokens.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to write to the USB storage.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.35 (214)
تحميل التسجيل 2014-11-07 12:04
حجم 6.33 MB
العربية لا
متطلبات
الروبوت 2.3+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

معلومات عامة
نص 2.0 (134)
تحميل التسجيل 2014-02-25 07:59
حجم 4.04 MB
العربية لا
متطلبات
الروبوت 2.1+
هندسة معمارية -
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to write to the USB storage.

Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.

Allows the app to control the flashlight.

Allows the app to control the vibrator.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

جميع التطبيقات LLC Axiom في mob-core.com

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك,واسمحوا لنا أن نعرف

2014/02/27 07:59
تطبيقات ذات صلة:
© 2011-2024 mob-core.com