ألعاب للأندرويد / منطق /
0 (0)
البلاط وحكايات لغز مغامرة
الاطلاع على ملفات أبك المتاحة
تطبيق متوافق مع الجهاز المحدد إلى Philips W8568

وصف:

لعبة بلاط وحكايات لغز مغامرة على الروبوت مغامرة التي شخصيتك اسمه ويلي ذهاب في رحلة خطيرة وطويلة، والذي يهدف - لإنقاذ المملكة من وحوش رهيبة وترويع له. أعد اللعبة Trilith الاستوديو - البيض، وأنها أول مشروع لها في الوقت الراهن، نقدر ذلك!

فكرة هذا الإدراك ليست جديدة، فقد تم مرارا التقينا آخر مرة في لعبة المصارعة حول، حيث، كما قررنا أنها ليست مناسبة جدا، ولكن للمغامرة ومعركة مع وحوش الرسوم المتحركة - مجرد حق!
وقد تم تنفيذ اللعبة مألوفة جدا للمستخدم العادي من الروبوت، وهي مقسمة إلى مستويات، كل منها عبارة عن مسافة معينة التي يجب التغلب عليها، وحاربت مع مجموعة متنوعة من المعارضين. عملية المعركة هنا هي متواضعة جدا، والنتائج التي تعتمد مباشرة على كيفية كبيرة هي تجربتك في جمع البلورات "ثلاثة في صف واحد"، بطبيعة الحال، على سبيل التحرير والسرد، وتحصل على نقاط اضافية، وبالتأكيد هزيمة جميع الأعداء. إذا كان على الطريق تجتمع الصدر، ثم فتحه من الممكن أيضا بمساعدة من اللغز في الجزء السفلي من الشاشة، في الواقع، عموما كل تعادل. بعد كل مستوى يمكنك الحصول على خبرة لا تقدر بثمن، والتي تساعد على ضخ الطابع الخاص بك وتكون على استعداد لمعركة شرسة.

الميزات:


ألعاب العيوب:


خلاصة القول: إذا كان الاختلاف من الكلاسيكية "ثلاثة في صف واحد،" أنت لا تبدو مثيرة للاهتمام، لعبة بلاط وحكايات لغز مغامرة سوف تضيف متنوعة وتعطيك ساعات عديدة من وسائل الترفيه.

إعلان

تحميل البلاط وحكايات لغز مغامرة 1.20.3 إلى Philips W8568

البلاط وحكايات لغز مغامرة

تقدم
الجديد في هذا الإصدار
*UPDATE*
- New tournament system for all players with amazing rewards
- Heroes and legendary weapons can now be won directly in the tournament
- 4 new heroes are ready to free Zanira with you
- Reduction of the difficulty in high levels
معلومات عامة
نص 1.20.3 (1020003)
تحميل التسجيل 2017-09-15 21:19
حجم 70.1 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.
Tiles & Tales 1.20.2 / 2017-08-08

البلاط وحكايات لغز مغامرة

تقدم
الجديد في هذا الإصدار
*UPDATE*
- New tournament system for all players with amazing rewards
- Heroes and legendary weapons can now be won directly in the tournament
- 4 new heroes are ready to free Zanira with you
- Reduction of the difficulty in high levels
معلومات عامة
نص 1.20.2 (1020002)
تحميل التسجيل 2017-08-08 19:46
حجم 70.1 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.
Tiles & Tales 1.20.1 / 2017-08-07

البلاط وحكايات لغز مغامرة

تقدم
الجديد في هذا الإصدار
*UPDATE*
- New tournament system for all players with amazing rewards
- Heroes and legendary weapons can now be won directly in the tournament
- 4 new heroes are ready to free Zanira with you
- Reduction of the difficulty in high levels
معلومات عامة
نص 1.20.1 (1020001)
تحميل التسجيل 2017-08-07 17:23
حجم 70.1 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.
Tiles & Tales 1.19.4 / 2017-07-26

البلاط وحكايات لغز مغامرة

تقدم
الجديد في هذا الإصدار
- New weapon system
- All weapons can now be equipped by any hero
- Weapons are now available in three quality levels
- You no longer need friends to craft weapons
- Unused weapons can now be salvaged for steel
- There are new talents for attack, chest, heal, and portal tiles, which increase your chance for better tiles
- The "Survivalist" talent has been removed and the gold reimbursed
معلومات عامة
نص 1.19.4 (1019004)
تحميل التسجيل 2017-07-26 06:36
حجم 72.87 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.
Tiles & Tales 1.19 / 2017-07-20

البلاط وحكايات لغز مغامرة

تقدم
الجديد في هذا الإصدار
- New weapon system
- All weapons can now be equipped by any hero
- Weapons are now available in three quality levels
- You no longer need friends to craft weapons
- Unused weapons can now be salvaged for steel
- There are new talents for attack, chest, heal, and portal tiles, which increase your chance for better tiles
- The "Survivalist" talent has been removed and the gold reimbursed
معلومات عامة
نص 1.19 (1019000)
تحميل التسجيل 2017-07-20 21:30
حجم 76.59 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.
Tiles & Tales 1.18.2 / 2017-06-19

البلاط وحكايات لغز مغامرة

تقدم
الجديد في هذا الإصدار
*UPDATE*
- Lilly's third epic weapon now works properly
- Added swedish and finnish language support
- You don't need a certain amount of stars anymore to advance to the next Dimension
- Use your collected stars to activate Wizard Towers. They give you powerful bonuses in your current dimension.
- The free daily loot chest has been replaced. From now on you get special offers and free rewards every 4 hours.
معلومات عامة
نص 1.18.2 (1018002)
تحميل التسجيل 2017-06-19 16:05
حجم 75.26 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.
Tiles & Tales 1.18.1 / 2017-06-04

البلاط وحكايات لغز مغامرة

تقدم
الجديد في هذا الإصدار
*UPDATE*
- Lilly's third epic weapon now works properly
- Added swedish and finnish language support
- You don't need a certain amount of stars anymore to advance to the next Dimension
- Use your collected stars to activate Wizard Towers. They give you powerful bonuses in your current dimension.
- The free daily loot chest has been replaced. From now on you get special offers and free rewards every 4 hours.
معلومات عامة
نص 1.18.1 (1018001)
تحميل التسجيل 2017-06-04 07:21
حجم 72.18 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.
Tiles & Tales 1.15 / 2017-04-13

البلاط وحكايات لغز مغامرة

تقدم
الجديد في هذا الإصدار
*UPDATE*
- All new weapon system for all heroes
- Collect steel and forge new powerful weapons with the help of your friends
- Several issues have been fixed
معلومات عامة
نص 1.15 (1015000)
تحميل التسجيل 2017-04-13 08:48
حجم 74.28 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.
Tiles & Tales 1.14.4 / 2017-03-31

البلاط وحكايات لغز مغامرة

تقدم
الجديد في هذا الإصدار
*UPDATE*
- The booster system has been reworked completely and enchantments have been added to the game
- New items have been added which can be obtained through treasure chests
- The difficulties of the levels have been adjusted
- Now, there are also Norbolds with magic abilities
معلومات عامة
نص 1.14.4 (1014004)
تحميل التسجيل 2017-03-31 09:48
حجم 65.93 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.
Tiles & Tales 1.14.2 / 2017-03-22

البلاط وحكايات لغز مغامرة

تقدم
الجديد في هذا الإصدار
*UPDATE*
- The booster system has been reworked completely and enchantments have been added to the game
- New items have been added which can be obtained through treasure chests
- The difficulties of the levels have been adjusted
- Now, there are also Norbolds with magic abilities
معلومات عامة
نص 1.14.2 (1014002)
تحميل التسجيل 2017-03-22 09:14
حجم 69.94 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.
Tiles & Tales 1.13.3 / 2017-02-28

البلاط وحكايات لغز مغامرة

تقدم
الجديد في هذا الإصدار
*UPDATE*
- The separation of story mode and adventure mode has been removed
- From now on 35 levels are combined in a dimension
- Several smaller bugs have been fixed
- We are happy to provide a Russian language version now
معلومات عامة
نص 1.13.3 (1013003)
تحميل التسجيل 2017-02-28 10:49
حجم 69.95 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.
Tiles & Tales 1.12.3 / 2017-02-14

البلاط وحكايات لغز مغامرة

تقدم
الجديد في هذا الإصدار
*UPDATE*
- Several minor issues have been fixed
- An error regarding the calculation of achievements had been fixed
- We're happy to announce that an italian language version is now also available
معلومات عامة
نص 1.12.3 (1012003)
تحميل التسجيل 2017-02-14 10:10
حجم 67.56 MB
العربية لا
متطلبات
الروبوت 4.0+
هندسة معمارية ARM7
تحقق التطبيق
يتم إيداع الملف
إذن

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.

Allows the app to write to the USB storage.

Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.

Allows the app to prevent the device from going to sleep.

Allows the app to disable the keylock and any associated password security. For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.

Allows the app to control the vibrator.

Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.

Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.

Allows the app to view information about network connections such as which networks exist and are connected.

Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.

Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.

Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.

Allows the app to read the contents of your USB storage.

اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك,واسمحوا لنا أن نعرف

مغامرات
2017/02/18 10:07
ألعاب أخرى Philips W8568

Philips W8568

نص: Android 4.2 (Jelly Bean)
معالج: Quad-core 1.2 GHz)
عرض: 4.00", 960x540
أبعاد: 123.5 x 63 x 18.8 مم
ألعاب ذات صلة:
Violett
4.5 (117)
الأسرة غي: البحث عن جميع و
4.5 (113)
بريستون الاسترليني
4.4 (43)
Syberia 2
4.3 (100)
آد ورلد: غضب الغريب
4.3 (191)
القراصنة إكسبلورر: البلدة خليج
4.2 (39)
LEGO NEXO KNIGHTS MERLOK 2.0
4.2 (390)
ملحمة مغامرة لعبة
4.2 (43)
ريبابليك
4.2 (235)
تجار كايدان
4.2 (27)
SWIP3
4.6 (17)
تاريخ NUMS
4.6 (40)
© 2011-2024 mob-core.com