وصف:
دبي هو مكان غير عادية جدا وفقا لمعايير لكثير من الناس، وخاصة إذا نظرتم الى موقفهم من السيارات. لتبرز من الحشد ليس هناك على الاطلاق لا يكفي فقط لشراء سيارة بارد، وكنت بحاجة لشراء سيارة نادرة والثقة الكاملة في شخصيته لتغطية ذلك في الذهب! لأن السيارات النادرة فقط هناك الكامل للغاية، لا أحد يستغرب أن أحد الجيران اشترى نفسه أمس ... لذلك فإنه ليس من المستغرب أن اللعبة من المطورين في دبي أيضا، عن السيارات. والحقيقة هي لا تصفيح الذهب ليس هنا، انها لا تزال الانجراف بدلا من بعض السباقات تباهى، حتى تكون مستعدة لسحب فرملة اليد والذهاب الى انزلاق في أول فرصة!
مبادئ اللعبة مألوفة جدا على أي "رايدر". أولا، وأرسل لك إلى المرآب، حيث يمكنك اختيار السيارة التي ثم الكثير جدا وأنهم مختلفون جدا، بدءا من السيارات على البقع إلى سيارات الدفع الرباعي الصغيرة، والتي لن يكون هناك أكثر من ذلك بكثير الصيد جيد. أيضا في اللعبة ثلاث طرق، وأن أيا منهم لن أذكر لكم من أي عرق آخر. لا يزال، وضعي هي معركة مع منافسيه، واحدة - وضع الخطوط، حيث يمكنك العمل بها.
يتميز دبي الانجراف 2:
نقاط الضعف الألعاب دبي الانجراف 2:
هنا لا يوجد شيء للحديث عنه! لعبة يمكن تحميلها مجانا، هو، بالإضافة إلى أسطول كبير هنا، فإنه صحيح أيضا، ولكن المشكلة هي أن الكثير من هذه أسطول كبير متاح فقط للدونات أو كثير (كثير حقا) إعلانات العرض، وطريقة الإعلان ودون السيارة هنا كامل ... حتى إن لم يكن على استعداد لإرضاء المعلنين أو الاستثمار بضع عشرات من الدولارات على القمة، وهذه اللعبة هو لك أن تكون إلى حد ما جردت أسفل، وأنه أمر محبط.
ومن الجدير بالذكر هنا أن الإدارة تقدم على الشاشة الصغيرة يمكن أن يكون العذاب، في ضوء حقيقة أن عناصرها يتم تحجيم تماما مثل كل شيء آخر، والحصول عليها سيكون صعبا.
الخلاصة: هذه اللعبة قد لا تكون أسوأ ممثل الانجراف على الروبوت، ولكن ربما الأكثر فسادا، وذلك استخلاص الاستنتاجات الخاصة بك.)
أو تساعد المطورين انقاذ على الذهب مرسيدس؟
Update Unity Level play fixes & optimization |
نص | 2.5.8 (68) |
تحميل التسجيل | |
حجم | 71.91 MB |
العربية | لا |
الروبوت | 7.0+ |
هندسة معمارية | ARM8 ARM7 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
POST_NOTIFICATIONS
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
POST_NOTIFICATIONS
Allows the app to prevent the device from going to sleep.
Allows the app to write to the USB storage.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
Add Unity Level play |
نص | 2.5.7 (67) |
تحميل التسجيل | |
حجم | 63.35 MB |
العربية | لا |
الروبوت | 7.0+ |
هندسة معمارية | ARM8 ARM7 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
POST_NOTIFICATIONS
Allows the app to write to the USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to read the contents of your USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
FOREGROUND_SERVICE
POST_NOTIFICATIONS
Allows the app to write to the USB storage.
Bug fixes and improvements |
نص | 2.5.6 (66) |
تحميل التسجيل | |
حجم | 54.38 MB |
العربية | لا |
الروبوت | 5.1+ |
هندسة معمارية | ARM8 ARM7 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
FOREGROUND_SERVICE
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Bug fixes and improvements |
نص | 2.5.4 (64) |
تحميل التسجيل | |
حجم | 54.28 MB |
العربية | لا |
الروبوت | 5.1+ |
هندسة معمارية | ARM8 ARM7 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to control the vibrator.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to read the contents of your USB storage.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to write to the USB storage.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Bug fixes and improvements |
نص | 2.5.3 (63) |
تحميل التسجيل | |
حجم | 26.1 MB |
العربية | لا |
الروبوت | 5.1+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to request authentication tokens.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to request authentication tokens.
Bug fixes and improvements |
نص | 2.5.2 (62) |
تحميل التسجيل | |
حجم | 27.03 MB |
العربية | لا |
الروبوت | 4.1+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to request authentication tokens.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to request authentication tokens.
- Daikoku Futo Pier Island Map - Replay Manager - Burnout / Launch Control Button - Cruise Control Button - New Cars |
نص | 2.5.1 (61) |
تحميل التسجيل | |
حجم | 27.03 MB |
العربية | لا |
الروبوت | 4.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to request authentication tokens.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
record audio
Allows the app to request authentication tokens.
- Purchasing car packs which contain the cars you already have - pin your achievements to your profile - tag the player you want to be notified when he or she is online - repeat your Favorite Dubai Drift Tunes, new and old ones - Ultra Smoke, Crowd Density , Damage Sparks , High Quality Shaders , all can be tweaked to - New exciting cars, fixes to old one, improved Monster Truck Physics, Repaint fix for SlapTrain Car |
نص | 2.5.0 (60) |
تحميل التسجيل | |
حجم | 25.64 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
- New Free Car -Send and Receive Gifts from your Friends -Share Cars, Earn cars by sharing Dubai Drift -Smoke Settings - Low,Medium and High -Chat Visibility , hide your self in PM -Better Drift visualizer -Removed Stone Collisions from LIWA (Night Desert) -Now add upto 4 alphabets in Number plate Code, and some new plates |
نص | 2.4.9 (59) |
تحميل التسجيل | |
حجم | 27.93 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
- New Arena - New Cars - Car Bundles |
نص | 2.4.8 (58) |
تحميل التسجيل | |
حجم | 27.18 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
- Pick one legendary car for free - Collision sparks - bug fixes |
نص | 2.4.7 (57) |
تحميل التسجيل | |
حجم | 26.45 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
Lag Fix IPv6 fix New Profile System Customizable Graphics Settings Win /Games ratio Review / Comments Private Games Instant Ban Director Mode Finger Gestures New Free Car for soccer buyers |
نص | 2.4.6 (56) |
تحميل التسجيل | |
حجم | 26.67 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the device and allow the app to slow down the overall device by always running.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
New Profile System Customizable Graphics Settings Win /Games ratio Review / Comments Private Games Instant Ban Director Mode Finger Gestures New Free Car for soccer buyers |
نص | 2.4.5 (55) |
تحميل التسجيل | |
حجم | 26.67 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
New Soccer Game New Free Car |
نص | 2.4.4 (54) |
تحميل التسجيل | |
حجم | 30.55 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your precise location using the Global Positioning System (GPS) or network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
Allows the app to read the contents of your USB storage.
نص | 2.4.3 (53) |
تحميل التسجيل | |
حجم | 27.3 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
Allows the app to read the contents of your USB storage.
نص | 2.4.2 (52) |
تحميل التسجيل | |
حجم | 29.18 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to request authentication tokens.
Allows the app to read the contents of your USB storage.
نص | 2.4.0 (50) |
تحميل التسجيل | |
حجم | 25.86 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
نص | 2.3.9 (49) |
تحميل التسجيل | |
حجم | 25.89 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
نص | 2.3.8 (48) |
تحميل التسجيل | |
حجم | 22.49 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
نص | 2.3.7 (47) |
تحميل التسجيل | |
حجم | 23.39 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
نص | 2.3.6 (46) |
تحميل التسجيل | |
حجم | 23.39 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to take pictures and videos with the camera. This permission allows the app to use the camera at any time without your confirmation.
Allows the app to read the contents of your USB storage.
نص | 2.3.4 (44) |
تحميل التسجيل | |
حجم | 23.28 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
نص | 2.3.3 (43) |
تحميل التسجيل | |
حجم | 23.25 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
نص | 2.3.1 (41) |
تحميل التسجيل | |
حجم | 23.26 MB |
العربية | لا |
الروبوت | 3.0+ |
هندسة معمارية | ARM7 x86 |
يتم إيداع الملف |
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active, and the remote number connected by a call.
Allows the app to write to the USB storage.
Allows the app to retrieve information about currently and recently running tasks. This may allow the app to discover information about which applications are used on the device.
Allows the app to view information about network connections such as which networks exist and are connected.
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Allows the app to control the vibrator.
record audio
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your device. It uses more power than the non-multicast mode.
Allows the app to get the list of accounts known by the device. This may include any accounts created by applications you have installed.
Allows the app to prevent the device from going to sleep.
Allows the app to get your approximate location. This location is derived by location services using network location sources such as cell towers and Wi-Fi. These location services must be turned on and available to your device for the app to use them. Apps may use this to determine approximately where you are.
Allows the app to read the contents of your USB storage.
اهتمام! استضافت جميع الملفات تطبيقات بإذن من المؤلفين أو وجدت متاحة مجانا على شبكة الإنترنت، وإذا كان أي من الملفات ينتهك حقوقك,واسمحوا لنا أن نعرف